Abstract:With the advantages of a high theoretical capacity, proper working voltage, and abundant reserves, silicon (Si) is regarded as a promising anode for lithium-ion batteries. However, huge volume expansion and low electronic conductivity impede the commercialization of Si anodes. We devised a one-step, vacuum-assisted reactive carbon coating technique to controllably produce micrometer-sized nanoporous silicon confined by homogeneous N-doped carbon nanosheet frameworks (), achieved by the solid state reaction of a commercial bulk precursor and the subsequent evaporation of byproducts. The graphitization degree, C and N contents of the carbon shell, as well as the porosity of Si can be regulated by adjusting the synthetic conditions. A rational structure can mitigate volume expansion to maintain structural integrity, enhance electronic conductivity to facilitate charge transport, and serve as a protected layer to stabilize the solid electrolyte interphase. The anode enables a stable cycling performance with 95.68% capacity retention for 4000 cycles at 5 A g–1. Furthermore, a flexible 2D/3D architecture is designed by conjugating with MXene. Lithiophilic homogenize Li nucleation and growth, evidenced by structural evolutions of @NCNF deposited Li. The application potential of and @NCNFs is estimated via assembling full cells with LiNi0.8Co0.1Mn0.1O2 and LiNi0.5Mn1.5O4 cathodes. This work offers a method for the rational design of alloy-based materials for advanced energy storage.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsnano.1c11098.Experimental section; XRD pattern and XPS spectra of Mg2Si and C3N4; ID/IG values, C and N contents, N2 adsorption/desorption isotherms, pore size distributions, TEM, HRTEM, and SAED of ; XRD, XPS, SEM and EDS mapping images of Nano-Si; charge/discharge curves of Nano-Si and anodes for LIBs at different rates; digital photograph (electrode and separator), SEM, thickness and thickness changes of Nano-Si and anodes before and after cycles; GITT and diffusion coefficients of and ; XRD, SEM, and EDS mapping images of NCM and LNMO; charge/discharge curves and capacity retentions of a full cell with Nano-Si and anodes at different rates (NCM and LNMO cathodes); EIS curves of a cycled full cell with Nano-Si and anodes (NCM and LNMO cathodes); XRD, SEM, and EDS mapping images of MAX; digital photograph of MXene solution; XRD, Raman, XPS, SEM, EDS mapping images, and digital photograph of MXene; SEM of @NCNFs; SEM of structural evolutions of Cu foil and @NCNFs deposited Li with different area capacities; voltage profiles on Cu and @NCNFs; EIS and SEM of Cu, @NCNFs, , and @ for Li metal anode after cycles; charge/discharge curves and capacity retentions of a full cell with and @ anodes at different rates (NCM and LNMO cathodes); EIS curves of a cycled full cell with and @ anodes (NCM and LNMO cathodes) (PDF)This article has not yet been cited by other publications.

Double Nitrogenation Layer Formed Using Nitric Oxide for Enhancing Li+ Storage Performance, Cycling Stability, and Safety of Si Electrodes

Nitrogen-Doped Carbon Matrix to Optimize Cycling Stability of Lithium Ion Battery Anode from SiOx Materials

Nitrogen-Doped Carbon-Coating Disproportionated SiO Materials As Long Cycling Stable Anode for Lithium Ion Batteries

Ultrathin Silicon Nanolayer Implanted NixSi/Ni Nanoparticles As Superlong‐Cycle Lithium‐Ion Anode Material

One-Step, Vacuum-Assisted Construction of Micrometer-Sized Nanoporous Silicon Confined by Uniform Two-Dimensional N-Doped Carbon toward Advanced Li Ion and MXene-Based Li Metal Batteries

Robust Nitrogen/Sulfur Co‐Doped Carbon Frameworks as Multifunctional Coating Layer on Si Anodes Toward Superior Lithium Storage

N‐Containing Carbon‐Coated β‐Si3N4 Enhances Si Anodes for High‐Performance Li‐Ion Batteries

Carbon Nanofiber Interlayer: a Highly Effective Strategy to Stabilize Silicon Anodes for Use in Lithium-Ion Batteries

Si@Nitrogen-Doped Carbon Nanoparticles for Lithium-Ion Battery Anodes

Enhanced ion conductivity and electrode–electrolyte interphase stability of porous Si anodes enabled by silicon nitride nanocoating for high-performance Li-ion batteries

Core-shell Structure of Porous Silicon with Nitrogen-Doped Carbon Layer for Lithium-Ion Batteries

“Nano-Skeleton” Si-SiOx@C Anodes towards Highly Stable Lithium-ion Batteries

High Performance Nitrogen-Doped Si/C as the Anode Material of Lithium-Ion Batteries

Understanding the Effect of Lithium Nitrate as Additive in Carbonate-Based Electrolytes for Silicon Anodes

Molecular Layer Deposited Mechanically and Chemically Robust Niobicone Interface Empowering Silicon Nanowire Anodes with Competent Cyclabilities

The preparation of mass producible, highly-cycling stable Si/C anode materials with nano-sized silicon crystals embedded in highly amorphous silicon matrix

Si doping to passivate high-voltage medium‐nickel low-cobalt layered oxide cathode reactivity enabling longer life lithium-ion battery

Two-dimensional SiOx/Nitrogen-Doped carbon derived from in situ constructed Siloxene/Polyaniline for robust lithium storage

Si anode with high initial Coulombic efficiency, long cycle life, and superior rate capability by integrated utilization of graphene and pitch-based carbon

Hollow Si/SiOx nanosphere/nitrogen-doped carbon superstructure with a double shell and void for high-rate and long-life lithium-ion storage

Enhanced Performance for Li & Na Ion Battery Anodes by Charge Modulation of Interface Through SiC4 and SiN1C3 Active Centers on Silicon Nitrogen Co‐Doped Graphene