Abstract:Experiments in a tubular furnace reactor and thermodynamic equilibrium calculations were conducted to investigate the impact of sulfur compounds on the migration of lead (Pb) during sludge incineration. Representative samples of typical sludge with and without the addition of sulfur compounds were combusted at 850 °C, and the partitioning of Pb in the solid phase (bottom ash) and gas phase (fly ash and flue gas) was quantified. The results indicate that three types of sulfur compounds (S, Na2S and Na2SO4) added to the sludge could facilitate the volatilization of Pb in the gas phase (fly ash and flue gas) into metal sulfates displacing its sulfides and some of its oxides. The effect of promoting Pb volatilization by adding Na2SO4 and Na2S was superior to that of the addition of S. In bottom ash, different metallic sulfides were found in the forms of lead sulfide, aluminosilicate minerals, and polymetallic-sulfides, which were minimally volatilized. The chemical equilibrium calculations indicated that sulfur stabilizes Pb in the form of PbSO4(s) at low temperatures (<1000 K). The equilibrium calculation prediction also suggested that SiO2, CaO, TiO2, and Al2O3 containing materials function as condensed phase solids in the temperature range of 800-1100 K as sorbents to stabilize Pb. However, in the presence of sulfur or chlorine or the co-existence of sulfur and chlorine, these sorbents were inactive. The effect of sulfur on Pb partitioning in the sludge incineration process mainly depended on the gas phase reaction, the surface reaction, the volatilization of products, and the concentration of Si, Ca and Al-containing compounds in the sludge. These findings provide useful information for understanding the partitioning behavior of Pb, facilitating the development of strategies to control the volatilization of Pb during sludge incineration.

Thermodynamic simulation of complex Pb−Bi concentrate oxidative bath smelting process

Phase Field Simulation for Non-Isothermal Solidification of Multicomponent Alloys Coupled with Thermodynamics Database

Development and application of matte/speiss/metal thermodynamic database for optimization of processing of drosses, dusts and reverts from lead, zinc and copper production

Numerical simulation of the effect of sulfide concentrate particle size on pollutant emission from flash smelting furnace

Performance influence study on blast furnace raw materials by zinc and pb

Phase Transformation Analysis and Process Optimisation of Low-Grade Lead–Zinc Oxysulphide Ore Carbothermal Reduction

Phase Transformation of Impurity Elements and High-efficiency Impurity Removal in Complex Copper Concentrate Smelting Process

Experimental and Thermodynamic Study of the Partition of Cr, Ni, Cu, Pb, and Mn During Co-Combustion of Pickling Sludge and Bituminous Coal

Experimental Study on the Phase Equilibrium of Copper Matte and Silica-Saturated FeO X -Sio 2 -Based Slags in Pyrometallurgical WEEE Processing

Thermodynamic modelling of liquid slag-matte-metal equilibria applied to the simulation of the Peirce-Smith converter

Effects of sulfur on lead partitioning during sludge incineration based on experiments and thermodynamic calculations

Geochemical fractionation and potential release behaviour of heavy metals in lead‒zinc smelting soils

Thermodynamics Evaluation and Verification of High-Sulfur Copper Slag Composite Agglomerate in Oxidation-Roasting-Separation-Leaching Process

Phase Equilibrium Studies of Nonferrous Smelting Slags: A Review

Experimental and simulation assessment to mitigate the emission of sulfide toxic gases and removing main impurities from Zn + Pb + Cu recovery plants

Behavior of Sulfur Oxides in Nonferrous Metal Smelters and Implications on Future Control and Emission Estimation.

Equilibrium of Copper Matte and Silica-Saturated Iron Silicate Slags at 1300 °C and PSO2\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \Setlength{\oddsidemargin}{-69Pt}

Liquid Metal Shell As an Effective Iron Oxide Modifier for Redox-Based Hydrogen Production at Intermediate Temperatures

Element Distribution in Oxygen-Enriched Bottom-Blown Smelting of High-Arsenic Copper Dross

Oxygen Transport Analysis in Lead-Bismuth Eutectic Coolant for Solid-Phase Oxygen Control

The Effect of In Concentration and Temperature on Dissolution and Precipitation in Sn–Bi Alloys