Abstract:Optical switching delay line (OSDL) is a structure consisting of cascaded optical switches and optical waveguides with different lengths. Different propagation paths can be selected to obtain the desired optical delay by controlling the optical switches in their through or cross states. Because of its high delay accuracy, large bandwidth and effective control, OSDL has become one of the key components of the microwave photonic beamforming system. However, calibrations of the through and cross states of all the optical switches are necessary due to fabrication errors before the OSDL can be used in real applications. At present, four typical calibration methods have been demonstrated: adding optical power monitoring taps, variable optical attenuators (VOAs), or phase shifters (PSs) into the OSDL chip, and measuring the transmission spectra of the chip under different driving voltages. However, adding additional optical power monitoring taps, VOAs, or PSs will increase the insertion loss and complexity of the OSDL chip, while the calibration method based on transmission spectra is still complicated and time-consuming. In this paper, a non-invasive calibration method for OSDL based on iterative optimization is proposed. Only the final output port of the OSDL chip is used as the optical power monitor, and the control voltages for all the optical switches in the through and cross states are iteratively optimized with the goal of achieving the largest output extinction ratio at the output port. As a proof of concept, we calibrated a 5-Bit silicon OSDL chip by using the proposed iterative optimization method, and all the delay states of the OSDL chip were measured, which were in good agreement with those of ODSL calibrated by using the optical power monitoring taps.

Non-invasive calibration method for optical switching delay line based on iterative optimization

Multi-channel Optical Switching Based on Scanning Mirror Instrumentation

Optimization of Longitudinal Alignment of an 4<i>f</i> System in a Compact Vectorial Optical-Field Generator Based on a High-Resolution Liquid Crystal Spatial Light Modulator

Performance comparison of integrated optical switching delay lines on three typical photonic integration pilot lines

Nonintrusive Characterization Method for Integrated Optical Delay Lines

A structure optimization for integrated binary reconfigurable true time delay lines

Photonic-Assisted Time-Interleaved Adc Based on Optical Delay Line

High-speed compact silicon digital optical switch with slot structure

Analysis of a Silicon Reconfigurable Feed-Forward Optical Delay Line

Automated Optimization Algorithm for 16-channel Silicon WDM System Using 4-Level Cascaded Mach-Zehnder Interferometers

Routing Control and Performance Test of Silicon-Based Photonic Switching Chip

Automatic calibration of silicon ring-based optical switch powered by machine learning.

An On-Chip Calibration Method for Optical Phased Array with No Blind Spot in the Steering Range

Design and Electro-Optical Co-Optimization of High-Speed Travelling Wave Silicon-Organic Hybrid Modulators

Calibration of cascaded phase shifters using pairwise scan method in silicon photonics integrated chip

Large-Scale Silicon Optical Switches for Optical Interconnection

Improvement and implementation of a multi-channel programmable optical controlled true time delay network

Silicon-Integrated 8-Channel 6-Bit Tunable Optical True-Time Delay Lines with High Switching Speed and Low Loss

Hi-Precision Fiber Delay Line Based On Magneto-Optic Switch

An open-source, accurate, and iterative calibration method for liquid-crystal-based spatial light modulators

Evaluation of a Subnanosecond Clock and Data Recovery Technique Via Matlab Simulink and Opti-System Co-Simulation