Abstract:Defect passivation and tailoring of perovskite–charge transport layer interfaces are critical strategies to minimize the recombination losses and improve the power conversion efficiency (PCE) in perovskite solar cells (PSCs). Herein, we use titanium carbide MXene (Ti3C2T x ) to tailor the electronic properties of the electron transport layer (ETL) and ETL/perovskite interface in inverted (p–i–n) PSCs and correlate them to the observed PCE. MXene doping in a [6,6]-phenyl-C61-butyric acid methyl ester (M-PC61BM)-based ETL results in an improved electrical conductivity and ETL/perovskite interface band alignment. A red shift in the Ag(2) peak in the Raman spectrum and a localized upshift of the Fermi level calculated using scanning Kelvin probe force microscopy (SKPFM) confirm the n-doping of PC61BM. Consequently, PSC devices with M-PC61BM as the ETL show a higher PCE of 18% than PC61BM ETL-based control devices (PCE = 15.2%). Importantly, our study proves that the improvement in the open-circuit voltage (V OC) and fill factor (FF) depends on how MXene is integrated into the PSC, i.e., as a dopant in the PC61BM ETL, an interfacial layer between the perovskite and ETL, or a standalone ETL. Through comprehensive photoluminescence, electrochemical impedance spectroscopy, space-charge limited current, and scanning Kelvin probe force microscopy-based analyses, we establish that the introduction of MXene in PSCs has multiple benefits, including improvement in carrier transport, passivation and trap state reduction, and better interfacial energy alignment. Further, we unravel the most prominent factor influencing device performance in each mode of MXene introduction. Hence, the study reinforces the potential of Ti3C2T x MXene as a versatile material for high-performance electronic and optoelectronic devices.

Titanium Carbide (Ti3C2Tx) MXene as Efficient Electron/Hole Transport Material for Perovskite Solar Cells and Electrode Material for Electrochemical Biosensors/Non-Biosensors Applications

Titanium Carbide (Ti3C2T x) MXene as Efficient Electron/Hole Transport Material for Perovskite Solar Cells and Electrode Material for Electrochemical Biosensors/Non-Biosensors Applications

Review—Two-Dimensional Titanium Carbide MXenes and Their Emerging Applications as Electrochemical Sensors

2D Titanium Carbide MXenes As Emerging Optical Biosensing Platforms.

Recent advances in the use of MXenes for photoelectrochemical sensors

Ti3C2Tx MXene for organic/perovskite optoelectronic devices

A X-bit Optimized 2D Solid Solution Ti3CNTx MXene As the Electron Transport Layer Toward High-performance Perovskite Solar Cells

Two-dimensional Ti3C2 MXene-based Nanostructures for Emerging Optoelectronic Applications

MXenes for Solar Cells.

Photocatalytic Applications of Two-Dimensional Ti3C2 MXenes: A Review

Surface-Modified Metallic Ti3C2Tx MXene As Electron Transport Layer for Planar Heterojunction Perovskite Solar Cells

Electrical Conductivity Enhancement and Electronic Applications of 2D Ti 3 C 2 T X MXene Materials

Progress in MXenes and Their Composites as Electrode Materials for Electrochemical Sensing and Dye-Sensitized Solar Cells

Ti3C2 MXene Quantum Dots/tio2 Inverse Opal Heterojunction Electrode Platform for Superior Photoelectrochemical Biosensing

Ti3C2Tx MXene Framework Materials: Preparation, Properties and Applications in Energy and Environment

Recent Advances and Prospects in MOF/MXene Sensors

SnO 2–Ti 3 C 2 MXene electron transport layers for perovskite solar cells

Ti3C2TxMXenes-based Flexible Materials for Electrochemical Energy Storage and Solar Energy Conversion

Recent progress in Ti3C2Tx-based materials: From fundamentals to emerging applications

Ti 3 C 2 T x MXenes-based flexible materials for electrochemical energy storage and solar energy conversion

MXene-Based Tailoring of Carrier Dynamics, Defect Passivation, and Interfacial Band Alignment for Efficient Planar p–i–n Perovskite Solar Cells