Abstract:The massive accumulation of plastic waste has caused a serious negative impact on the human living environment. Replacing traditional petroleum-based polymers with biobased and biodegradable poly(l-lactic acid) (PLLA) is considered an effective way to solve this problem. However, it is still a great challenge to manufacture PLLA-based composites with high thermal conductivity and excellent mechanical properties via tailoring the microstructures of the blend composites. In the present work, a melt extrusion-stretching method is utilized to fabricate biodegradable PLLA/poly(butylene adipate-co-butylene terephthalate)/carbon nanofiber (PLLA/PBAT/CNF) blend composites. It is found that the incorporation of the extensional flow field induces the formation of multioriented microstructures in the composites, including the oriented PLLA molecular chains, elongated PBAT dispersed phase, and oriented CNFs, which synergistically improve the thermal conductivity and mechanical properties of the blend composites. At a CNF content of 10 wt %, the in-plane thermal conductivity, tensile strength, and elongation at break of the blend composite reach 1.53 Wm–1 K–1, 66.8 MPa, and 56.5%, respectively, which increased by 31.9, 73.5, and 874.1% compared with those of the conventionally hot-compressed sample (1.16 Wm–1 K–1, 38.5 MPa, and 5.8%, respectively). The main mechanism for the improved thermal conductivity is that the multioriented structure promotes the formation of a CNF thermal conductive network in the composites. The strengthening mechanism is attributed to the orientation of both PLLA molecular chains and CNFs in the stretching direction, restricting the movement of PLLA molecular segments around CNFs, and the toughening mechanism is due to the transformation of PLLA molecular chains from low-energy gt conformers to high-energy gg conformers induced by extensional flow field. More interestingly, after the extrusion-stretched samples are annealed, the oriented PLLA molecular chains form oriented crystal structures such as extended-chain lamellae, common "Shish–kebabs," and hybrid Shish–kebabs, which further enhance the thermal conductivity and heat resistance of the samples. This work reveals the effects of the orientation of the matrix molecular chains and crystallites on the thermal conductivity and mechanical properties of composites and provides a new way to prepare high-performance PLLA-based composites with high thermal conductivity, excellent mechanical properties, and high heat resistance.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.biomac.2c00067.DSC characterization, DMA characterization, rheological test characterization, FTIR characterization, and the relevant equations for calculating the crystallinity and thermal enhancement factor (PDF)This article has not yet been cited by other publications.

Construct perfect carbon nanotube/graphene nanoplate synergistic conductive network in poly(L-lactic acid) porous materials by nonsolvent-induced rapid phase separation

DLP 3D Printing of Electrically Conductive Hybrid Hydrogels Via Polymerization-Induced Phase Separation and Subsequent in Situ Assembly of Polypyrrole

Graphene Nanoplatelets or Polylactic Acid Conductive Polymer Composites: Tensile, Thermal and Electrical Properties

Extensional Flow-Induced Conductive Nanohybrid Shish in Poly(lactic Acid) Nanocomposites Toward Pioneering Combination of High Electrical Conductivity, Strength, and Ductility

Creating poly(lactic acid)/carbon nanotubes/carbon black nanocomposites with high electrical conductivity and good mechanical properties by constructing a segregated double network with a low content of hybrid nanofiller

Preparation of carbon black/graphene nanosheets/PP composites with 3D separated conductive networks based on selective laser sintering

A facile and low environmental impact approach to prepare thermally conductive nanocomposites based on polylactide and graphite nanoplatelets

Electrically conductive polymer composite containing hybrid graphene nanoplatelets and carbon nanotubes: synergistic effect and tunable conductivity anisotropy

Stereocomplexation of Poly(Lactic Acid)s on Graphite Nanoplatelets: from Functionalized Nanoparticles to Self-Assembled Nanostructures

Fabricating High-Thermal-Conductivity, High-Strength, and High-Toughness Polylactic Acid-Based Blend Composites via Constructing Multioriented Microstructures

Improved Yield and Electrical Properties of Poly(Lactic Acid)/Carbon Nanotube Composites by Shear and Anneal

Thermal conductive segregated multi-scale network constructed by ball-milling and in-situ polymerization in PEEK/MWCNT/graphite composite

Fabrication of PLA/CB composites with excellent electrical conductivity and stiffness-ductility balance based on coupling extensional stress with thermal field

Flexible Electrospun Polyvinylidene Fluoride Nanofibrous Composites with High Electrical Conductivity and Good Mechanical Properties by Employing Ultrasonication Induced Dispersion of Multi-Walled Carbon Nanotubes

Enhancement of Electrical Conductivity by Changing Phase Morphology for Composites Consisting of Polylactide and Poly(ε-Caprolactone) Filled with Acid-Oxidized Multiwalled Carbon Nanotubes.

Preparation of highly thermally conductive but electrically insulating composites by constructing a segregated double network in polymer composites

Excellent mechanical and electromagnetic interference shielding properties of polylactic acid/polycaprolactone/multiwalled carbon nanotube composites enabled by a multilayer structure design

Enhanced Mechanical and Multifunctional Properties of GNPs/CNTs Hybridized PLA Nanocomposites by Implementing Dual‐Processing of Pickering Emulsion‐Melt Blending Methods

Macroporous and nanofibrous poly(lactide-co-glycolide)(50/50) scaffolds via phase separation combined with particle-leaching

Preparation and Thermomechanical Properties of Nanocrystalline Cellulose Reinforced Poly(Lactic Acid) Nanocomposites

Enhancing Polylactic Acid Properties with Graphene Nanoplatelets and Carbon Black Nanoparticles: A Study of the Electrical and Mechanical Characterization of 3D-Printed and Injection-Molded Samples