Abstract:Preparation and reinforcement mechanism of carbon nanotube modified carbon fiber reinforced polylactic acid composite. The mechanical strength of polylactic acid (PLA) can be improved by carbon fiber (CF) compositing to expand its application in tissue engineering scaffolds. However, the mechanical strength of CF‐reinforced polylactic acid (CFRPLA) composites is compromised due to weak interfacial interaction resulting from the chemically inert surface of CF. In the article, carbon nanotube (CNT) with poly(diallyldimethylammonium chloride) (PDDA) as a coupling agent was covered on CF to improve the chemical activity and roughness of the surface of CF, and then the as‐prepared CF‐PCNT were further incorporated into PLA via melt compounding. The yield strength, modulus, and thermal conductivity of PLA/CF‐PCNT were 14.09%, 7.65%, and 5.24% higher than those of PLA/CF, respectively, and the volume resistivity was 99.74% lower at a 10 wt% loading. The enhancement for the mechanical properties of PLA/CF‐PCNT composites could be ascribed to the mechanical locking, hydrogen bonds and covalent bonds between CF and matrix through the interface modulation of CNT and PDDA. This facile and non‐destructive method offers a novel strategy for the modification of CF fillers. Highlights CF was modified by PDDA and CNT through a facile and non‐destructive method. The active functional groups and roughness on the surface of CF were increased. The surfaces of CFs were characterized by FT‐IR, Raman spectra, XPS and SEM. The interface was improved by mechanical locking, covalent, and hydrogen bonds. The mechanical strength, electrical and thermal conductivity of composites were improved.

Enhancement of Electrical Conductivity by Changing Phase Morphology for Composites Consisting of Polylactide and Poly(ε-Caprolactone) Filled with Acid-Oxidized Multiwalled Carbon Nanotubes.

Excellent mechanical and electromagnetic interference shielding properties of polylactic acid/polycaprolactone/multiwalled carbon nanotube composites enabled by a multilayer structure design

Selective Localization of Multiwalled Carbon Nanotubes in Poly(ε-caprolactone)/Polylactide Blend

Morphology evolution to form double percolation polylactide/polycaprolactone/MWCNTs nanocomposites with ultralow percolation threshold and excellent EMI shielding

Effect of hydroxyl and carboxyl-functionalized carbon nanotubes on phase morphology, mechanical and dielectric properties of poly(lactide)/poly(butylene adipate-co-terephthalate) composites

Selective Localization Of Multiwalled Carbon Nanotubes In Poly(Epsilon-Caprolactone)/Polylactide Blend

Shape Memory Properties of Poly(L-Lactide) / Poly(ε-Caprolactone) Blends and Their Composites with Carbon Nanotubes

Creating poly(lactic acid)/carbon nanotubes/carbon black nanocomposites with high electrical conductivity and good mechanical properties by constructing a segregated double network with a low content of hybrid nanofiller

Enhanced dielectric and mechanical properties of polylactic acid/polycaprolactone blends by introducing double‐layer carbon nanofillers

Enhanced nucleation rate of polylactide in composites assisted by surface acid oxidized carbon nanotubes of different aspect ratios.

Polylactide/graphite Nanosheets/mwcnts Nanocomposites with Enhanced Mechanical, Thermal and Electrical Properties

Improved mechanical and EMI shielding properties of PLA/PCL composites by controlling distribution of PIL-modified CNTs

Carbon nanotubes-filled polylactic acid/polycaprolactone biodegradable blends: Effect of the polycaprolactone viscosity and carbon nanotubes addition on the microstructure, electrical and mechanical properties

A facile method for carbon nanotube/carbon fiber‐reinforced polylactic acid composites

Extensional Flow-Induced Conductive Nanohybrid Shish in Poly(lactic Acid) Nanocomposites Toward Pioneering Combination of High Electrical Conductivity, Strength, and Ductility

Properties of microinjection-molded multi-walled carbon nanotubes-filled poly(lactic acid)/poly[(butylene succinate)-co-adipate] blend nanocomposites

Morphology, Rheology and Crystallization Behavior of Polylactide Composites Prepared Through Addition of Five-Armed Star Polylactide Grafted Multiwalled Carbon Nanotubes

Enhanced Mechanical, Thermal and Electrical Properties of Additively Manufactured Polylactic Acid/Carbon Nanotube Polymer Nanocomposites

Enhanced Mechanical and Photoluminescence Effect of Poly( L -Lactide) Reinforced with Functionalized Multiwalled Carbon Nanotubes

Construction of polydopamine and carbon nanotube on carbon fiber surfaces to improve the mechanical properties of CF/PLA composite

A novel PLA/P(3HB-co-4HB)/MWCNT composite featuring enhanced mechanical properties and excellent thermal stability based on elongational rheology