Abstract:Tribology at cryogenic temperatures has attracted much attention since the 1950s with the acceleration of its applications in high-tech equipment such as cryogenic wind tunnels, liquid fuel rockets, space infrared telescopes, superconducting devices, and planetary exploration, which require solid lubrication for moving parts at low temperatures down to 4 K in cryogenic liquid, gaseous, or vacuum environments. Herein, the research progress regarding cryo-tribology is reviewed. The tribological properties and mechanisms of solid lubricants listed as carbon materials, molybdenum disulfide, polymers, and polymer-based composites with decreasing temperature are summarized. The friction coefficient increases with decreasing temperature induced by thermally activated processes. The mechanism of transfer film formation should be considered as a significant way to enhance the tribological properties of solid lubricants. In addition, applications of solid lubrication on moving parts under cryogenic conditions, such as spherical plain bearings and roller bearings, are introduced. The technology for tribological testing of materials and bearings at cryogenic temperatures is summarized, where the environmental control, motion and loading realization, as well as friction and wear measurement together in a low-temperature environment, result in the difficulties and challenges of the low-temperature tribotester. In particular, novel technologies and tribotesters have been developed for tribotests and tribological studies of solid lubricants, spherical plain bearings, and roller bearings, overcoming limitations regarding cooling in vacuum and resolution of friction measurement, among others, and concentrating on in-situ observation of friction interface. These not only promote a deep understanding of friction and wear mechanism at low temperatures, but also provide insights into the performance of moving parts or components in cryogenic applications.

Experiments and molecular dynamic simulations on the cryogenic tribological behaviors of pure silver in liquid nitrogen

Frictional Behavior of a Micro-sized Superconducting Fiber in a Low-Temperature Medium: Experimental and Computational Analysis

Progresses on Cryo-Tribology: Lubrication Mechanisms, Detection Methods and Applications

Tribological Investigation of Layered Sodium Silicate As Lubricant Additives Prepared by Freezing Titration Ion Exchange

A New Pathway for Superlubricity in a Multilayered MoS2-Ag Film under Cryogenic Environment

Impacts of chemical short-range orders on nanotribological properties of CrCoNi medium-entropy alloy at room and cryogenic temperatures

Nano-tribological behavior of CuCoCrFeNi high-entropy alloys at cryogenic temperature: A molecular dynamics study

Characterization of friction behavior under cryogenic conditions: Ti–6Al–4V

Tribological behavior and microstructural evolution of lubricating film of silver matrix self-lubricating nanocomposite

Nano-tribology Through Molecular Dynamics Simulations

Research on the Friction and Wear Mechanism of a Polymer Interface at Low Temperature Based on Molecular Dynamics Simulation

Friction properties of the single-crystal Si in collision sliding contacts under different lubrication conditions

Cryogenic tribological behavior of coarse, ultrafine grained and heterogeneous Fe-18Cr-8Ni austenitic stainless steel

Research on Improving the Tribological Properties of Bearings under Cryogenic Conditions

Atomic simulations of effects of contact size and interfacial interaction strength on superlubricity in incommensurate sliding interface

Acquisition of molecular rolling lubrication by self-curling of graphite nanosheet at cryogenic temperature

A Study on Mechanism of Tribological Behavior of Carbon Nanotubes

Molecular Dynamics Simulation of Polycrystalline Metal under High Velocity Nanoscale Sliding

Investigation of the preparation and tribological behavior of a frictional interface covered with sinusoidal microchannels containing SnAgCu and Ti3SiC2

Experimental study on friction and wear behaviour of amorphous carbon coatings for mechanical seals in cryogenic environment

Molecular Dynamics Simulations of Atomic-Scale Friction in Diamond-Silver Sliding System