Abstract:The mechanical properties of deep rock masses are significantly influenced by temperature and other factors. The effect of temperature on the strength of deep rock masses will pose a serious challenge to deep resource exploitation and engineering construction. In this paper, the thermal-mechanical coupling calculation model is established by particle flow code (PFC2D) to study the uniaxial compression response of rock masses with microcracks after temperature load. The strength of failure, microcracks, and strain was analyzed. The results show that: (i) When the soft rock thickness ratio Hs/H < 0.5, the displacement caused by the applied temperature is concentrated at the structural plane, and the contact force is concentrated at the end of the initial microcrack. When Hs/H ≥ 0.5, the displacement caused by the applied temperature is concentrated on both sides of the initial microcrack, and the contact force is concentrated in the hard rock area. (ii) The number of microcracks decreases with the increase of soft rock thickness under different working conditions. When the soft rock thickness ratio Hs/H < 0.5, the relationship curve between the number of microcracks and the vertical strain shows two stages of change. When Hs/H ≥ 0.5, the relationship curve between the number of cracks and the vertical strain changes shows three stages of change. (iii) When the soft rock thickness ratio Hs/H < 0.5, the failure strength decreases with the increase of soft rock thickness ratio at T = 100°C and 200°C. When T = 300°C and 400°C, the failure strength decreased first and then increased. When Hs/H ≥ 0.5, the failure strength increases with the increase of soft rock thickness at T = 200°C, 300°C, and 400°C. At T = 100°C, the failure strength decreases with the increase of soft rock thickness.

A micro–macro model evaluating thermal treatment temperature effect on compressive failure of brittle rocks

An Analytical Compressive-Shear Fracture Model Influenced by Thermally Treated Microcracks in Brittle Solids

A Micromechanical-Based Failure Criterion for Rocks after High-Temperature Treatment

Study on Microcrack Growth-Based Dynamic Compressive Mechanical Properties in Brittle Rocks

A Micro–macro Model of Pore Pressure Effect on Shear Fracture in Brittle Rocks under Compression

Study on mechanical properties of interbedded rock masses with microcrack based on thermal-mechanical coupling

The Influence of Temperatures on the Mechanical Properties and Fracture Behavior of Rocks under Mixed Mode I/II Loading

A Micro-Macro Dynamic Compressive-Shear Fracture Model under Static Confining Pressure in Brittle Rocks

A Micro–macro Method for Evaluating Progressive and Direct Tensile Fractures in Brittle Rocks

Effects of Crack Inclination on Shear Failure of Brittle Geomaterials under Compression

Micromechanics-based model study of shear properties of brittle rocks

Micro‐Thermomechanical Modeling of Rocks With Temperature‐Dependent Friction and Damage Laws

A True Triaxial Compression-Induced Microcracking Model for Evaluating Short-Term Progressive and Long-Term Creep Failures of Brittle Rock

Macro-micro mechanical modelfor progressive and creep failure of brittle rock

A Micro-Macro Mechanism of Hydraulic Fracturing with Initial Stress State Effect of Brittle Rock

A Micro-Macro Mechanical Model of Direct Tensile Fracture in Brittle Rocks under Dry-Wet Cycles

A Meso-Macro Method of Evaluating Water Content Effect on Direct Tensile Fracture in Brittle Rocks

Investigation of the Fracture Characteristics of Rock Mass After Thermal–Mechanical Damage Coupling

A Micro–macro Method for Predicting the Shear Strength of Brittle Rock under Compressive Loading

Theoretical characterization of the temperature‐dependent mode I fracture toughness of rocks

A Micromechanical Method to Predict Macroscopic Behavior of Brittle Creep Failure in Rock