Abstract:This paper discusses the effect called undesirable extrusion dynamics that occur during material extrusion printing or fused deposition modeling. This effect is revealed during high acceleration and deceleration of printing head and results in over-extrusion on corners of parts and printed layer unevenness. To minimize this effect, modern control systems use Advance algorithms for dynamics control. However, such disadvantages as inertia, reduced printing speed, need for manual calibration, as well as uncertainty of the influence of material, nozzle geometry, and printing process parameters on the algorithm performance do not allow this group of solutions to be applied on an industrial scale. The paper presents a study of the influence of printing characteristics, such as material type, extruder type, printing temperature, layer and nozzle geometry, on extrusion dynamics through a series of experiments. The experiments were carried out on a Creality Ender 3 printer. The obtained experimental data will allow us to deepen the understanding of extrusion dynamics influence in FDM printing; they are also used in the present study to modify existing dynamics control algorithms. The paper proposes a modification of Advance algorithm based on machine learning. It is proposed to implement an algorithm containing two trained neural network models. One model predicts changes in printing head motion to minimize residual defects and increase average print speed. The second model predicts the compensation parameter for specific printing conditions without the need for manual calibration. A neural network model was trained to determine the compensation parameter depending on the type of material, layer thickness, nozzle geometry and printing temperature. The model was trained based on experimental data. The developed algorithm was introduced into Linear Advance algorithm of the Marlin firmware and tested on Creality Ender 3. The experiments showed that the developed model can successfully predict the required compensation and can be applied during the printing process. The proposed algorithm helps to facilitate and automate the process of extrusion dynamics compensation which will expand the possibilities of FDM printers’ application in industrial conditions. The obtained algorithm can improve the accuracy and printing speed which will subsequently help to increase the economic independence and competitiveness of small design organizations and enterprises in Russia that use 3D printers. This research expands the possibilities of rapid prototyping and may help to ensure the rapid creation of pilot batches.

Analysis of Multiple Print-Head Displacement Mechanisms in 3D Space for Material Extrusion Machine

An Overview of Extensive Analysis of 3D Printing Applications in the Manufacturing Sector

Structural design and heat transfer analysis of twin-screw extrusion 3D printer

Process Design and Parameters Interaction in Material Extrusion 3D Printing: A Review

Pressure control in material extrusion additive manufacturing

Optimization of Tool-Path Generation for Material Extrusion-Based Additive Manufacturing Technology

Improvement and Experimental Explore on Coordinated Control of Kinematic Mechanism of FDM 3D Printer

Design of Extruder with Metering Section Removed and Replaced with Gear Pump for Machine Space Savings in Large Format Additive Manufacturing

Dual feed progressive cavity pump extrusion system for functionally graded direct ink write 3D printing

Optimization of the Print Quality by Controlling the Process Parameters on 3D Printing Machine

Development of a novel gantry system for cooperative printing of plastic materials

Multi-parametric numerical analysis of 3D printed sparse infill structures

Towards design of mechanical part and electronic control of multi-material/multicolor fused deposition modeling 3D printing

Development of hybrid multi-head, multi-material paste and ink extrusion type 3D printer for biomedical applications

Multi-Axis 3D Printer Design Challenges for In-Situ Additive Manufacturing

Intensifying Hands-on Learning and Experimentation of Fused Deposition Modeling Three-Dimensional Printers

Mechanical Performance over Energy Expenditure in MEX 3D Printing of Polycarbonate: A Multiparametric Optimization with the Aid of Robust Experimental Design

Design, Testing, and Application of an Open-Source Powder Material Extrusion 3D Printer

Design and Build of a Tele-Operated and Robot-Assisted Multi-Material 3D Printer System

A Systematic Review on 4D Printing Technology

Large-scale 3D printers for additive manufacturing: design considerations and challenges