Abstract:It is common on space vehicles to have thermal insulation adhesively bonded to a metal structure. A typical defect in such structures is an interlayer disbond, which may occur either between the insulation and the metal substructure or between the layers of multilayer thermal insulation. One-sided thermal nondestructive testing (TNDT) using surface optical heating, such as Xenon flash or quartz tube, may detect disbonds if the thermal insulation thickness does not exceed a few millimeters and disbonds are not very small. In thicker insulation, the effectiveness of the inspection can be improved by using electrical induction to heat the metal base. In both cases, thermal excitation can be areal heating, which is heat projected over an area by a stationary heat source, or scanned linear heating (SLH), which is a linear heater scanned across the test subject. In the latter, either the linear heater is moved across a stationary test subject, or the linear heater is stationary and the test subject is moved. The SLH method usually provides a higher inspection rate (inspected area unit time). In this research, both the theoretical and experimental features of both optical and induction heating have been investigated and compared in the application to non-metallic insulation adhesively bonded to a metal structure. The effectiveness of using neural networks (NN) for characterizing defects has also been studied to demonstrate that optimal NN training should involve 4–5 points selected in defect areas close to non-defect areas, and the NN input data should be prepared by applying the known technique of Thermographic Signal Reconstruction (TSR). Since SLH provides more uniform heating, it provides higher quality IR thermograms than those obtained from areal (flash) heating and this improves the detectability of defects in thermal insulation to a depth of 4–6 mm. Other advantages of SLH for TNDT testing are (1) an inspection rate that is twice as high as an area heating technique and (2) a better potential for fully automated (robotic) testing.

Principle, Equipment and Applications of Line-Scanning Infrared Thermographic NDT

Thermal NDT: historical milestones, state-of-the-art and trends

The Detection and Characterization of Defects in Metal/Non-metal Sandwich Structures by Thermal NDT, and a Comparison of Areal Heating and Scanned Linear Heating by Optical and Inductive Methods

Infrared Thermography and Thermal Nondestructive Testing

Development and Application of Infrared Thermography Non-Destructive Testing Techniques

Line Scanning Thermography Reconstruction Algorithm for Defects Inspection with Novel Velocity Estimation and Image Registration

Noninvasive Methods of Active Thermographic Investigation: Short Overview of Theoretical Foundations with an Example of Application

Progress and Trends in Non-destructive Testing for Thermal Barrier Coatings Based on Infrared Thermography: A Review

Non-Destructive Infrared Lock-in Thermal Tests: Update on the Current Defect Detectability

Continuous laser-line scanning thermography with data-processing algorithm for rapid and accurate defect inspection

Linear laser fast scanning thermography NDT for artificial disbond defects in thermal barrier coatings.

Infrared nondestructive testing technology for multilayer metal structures

Infrared Thermography NDT and Its Development

Non-destructive Testing of Debonding Defects in Thermal Barrier Coating System Using Laser Infrared Thermography

Study on Infrared Thermal Wave Inspection Technology Using Linear Frequency Modulated (lfm) Light Excitation

Thermal Nondestructive Testing: Development of Conventional Directions and New Trends (A Review)

Multimode infrared thermal-wave imaging in non-destructive testing and evaluation (NDT&E): Physical principles, modulated waveform, and excitation heat source

Thermal non‐destructive testing and evaluation for inspection of carbon fibre‐reinforced polymers

Technology of linear frequency modulation infrared thermal-wave imaging for nondestructive testing

Infrared Polarization Imaging-based Non-destructive Thermography Inspection

Nondestructive Testing and Transient Electromagnetic-Thermal NDT