Abstract:Silty sand can be prone to erosion because it is short of stability cementation materials. In recent years, various emerging soil stabilizers, especially natural organic substance and polymer, have been used to improve soil strength, water stability and ability of erosion resistance. In this study, a new type of soil stabilization additive modified carboxymethyl cellulose (M-CMC), consisting of carboxymethyl cellulose (CMC) and polyacrylamide (PAM), was developed for stabilization treatment of silty sand. A series of laboratory tests were conducted to evaluate the performance of M-CMC application on shear strength, permeability, water susceptibility and microstructure of the silty sand soil treated with additive concentration range of 0% - 1.3%. Moreover, rainfall simulation experiments were conducted to evaluate the effect of M-CMC on the erosion control of silty sand which compacted soil in a large-sized runoff (1 m2) plots. Test plot which treated with 1.1% concentration of soil stabilizer and control plot which treated with same amount of water were cured outdoor for 50 days before rainfall simulation test. Rainfall intensity was applied at 120 mm·h-1 for 60 min. Finally, a field test is performed in order to assess the practical application effect of silty sand with 1.1% M-CMC. In general, the results showed that an increase of the concentration of M-CMC resulted in an improvement in water susceptibility and shear strength but a decrease in the infiltration rate. Internal friction angle of the treated soil remarkably increased under a low M-CMC concentration (less than 0.7%), while cohesion of them sharply increased under a relatively high M-CMC concentration (larger than 0.7%). Water susceptibility of the treated samples was improved remarkably under a relatively high M-CMC concentration (larger than 0.7%). Permeability coefficient of them decreased significantly when the M-CMC concentration was increased from 0 to 0.5% and, then, from 0.9% to 1.3%. Based on the images obtained from a scanning electron microscopy (SEM), the “coating” and “netting” effects were attributable to the observed improvement of the treated soil. When a plot was protected by a thin layer of soil treated with 1.1% MCMC, its erosion resistance was greatly improved, infiltration rate of water and soil loss yield of plot decreased greatly and even though under a rainfall intensity of 120 mm·h-1. The field test with long-term monitoring (three years) confirmed the M-CMC can effectively control erosion of silty sand slopes for a prolonged period of time.

Transportation sand leakage and turf performance of sand-based removable modular turf as affected by the combined action of coir fiber and polyacrylamide

Feasibility Study on Preparing Economical and Environmentally-Friendly High-Flowability Ultra-High Performance Cementitious Composites with Original Graded Stone Powder Free Recycled Manufactured Sands

Sustainable Reuse of Dredged Soil as a Substrate Material by Improvement with Polyacrylamide, Straw, and Superabsorbent Polymer

Impact of polymer mixtures on the stabilization and erosion control of silty sand slope

The Effect of Polymer-Fiber Stabilization on the Unconfined Compressive Strength and Shear Strength of Sand

Influence of Polyurethane Polymer on the Strength and Mechanical Behavior of Sand-root Composite

Effect of Different Ameliorants on the Infiltration and Decontamination Capacities of Soil

Static and cyclic performance of polyurethane foam adhesive bound soil–rubber mixtures under drained conditions

Desert silty sand modified by anionic PAM and ordinary portland cement: Microfabric reinforcement and durability

Resilient Characteristics of Polymer Emulsion-Treated Sandy Soil

Cracking and erosion behaviors of sand-clay mixtures stabilized with microbial biopolymer and palm fiber

Shear behavior of polyurethane foam adhesive improved calcareous sand under large-scale triaxial test

Performance of environmentally friendly biopolymer-natural fiber on post-freeze–thaw behavior on silty sand: macro- and micro analysis

Effect of Incorporating Polyvinyl Alcohol Fiber on the Mechanical Properties of EICP-Treated Sand

Effects of cement content, polypropylene fiber length and dosage on fluidity and mechanical properties of fiber-toughened cemented aeolian sand backfill

Fiber-Reinforced Microbially Induced Carbonate Precipitation (MICP) for Enhancing Soil Stability: Mechanisms, Effects, and Future Prospects

Study on the Permeability and Mechanical Properties of Sandy Soil Under Carbon Fiber-Based Urease Mineralization

Coupling Effect of Fiber Reinforcement and MICP Stabilization on the Tensile Behavior of Calcareous Sand

Performance Prediction of Cement Stabilized Soil Incorporating Solid Waste and Propylene Fiber

Effects of Different Types of Fibers on the Physical and Mechanical Properties of MICP-Treated Calcareous Sand

Effects of several polymeric materials on the improvement of the sandy soil under rainfall simulation