Abstract:Silty sand can be prone to erosion because it is short of stability cementation materials. In recent years, various emerging soil stabilizers, especially natural organic substance and polymer, have been used to improve soil strength, water stability and ability of erosion resistance. In this study, a new type of soil stabilization additive modified carboxymethyl cellulose (M-CMC), consisting of carboxymethyl cellulose (CMC) and polyacrylamide (PAM), was developed for stabilization treatment of silty sand. A series of laboratory tests were conducted to evaluate the performance of M-CMC application on shear strength, permeability, water susceptibility and microstructure of the silty sand soil treated with additive concentration range of 0% - 1.3%. Moreover, rainfall simulation experiments were conducted to evaluate the effect of M-CMC on the erosion control of silty sand which compacted soil in a large-sized runoff (1 m2) plots. Test plot which treated with 1.1% concentration of soil stabilizer and control plot which treated with same amount of water were cured outdoor for 50 days before rainfall simulation test. Rainfall intensity was applied at 120 mm·h-1 for 60 min. Finally, a field test is performed in order to assess the practical application effect of silty sand with 1.1% M-CMC. In general, the results showed that an increase of the concentration of M-CMC resulted in an improvement in water susceptibility and shear strength but a decrease in the infiltration rate. Internal friction angle of the treated soil remarkably increased under a low M-CMC concentration (less than 0.7%), while cohesion of them sharply increased under a relatively high M-CMC concentration (larger than 0.7%). Water susceptibility of the treated samples was improved remarkably under a relatively high M-CMC concentration (larger than 0.7%). Permeability coefficient of them decreased significantly when the M-CMC concentration was increased from 0 to 0.5% and, then, from 0.9% to 1.3%. Based on the images obtained from a scanning electron microscopy (SEM), the “coating” and “netting” effects were attributable to the observed improvement of the treated soil. When a plot was protected by a thin layer of soil treated with 1.1% MCMC, its erosion resistance was greatly improved, infiltration rate of water and soil loss yield of plot decreased greatly and even though under a rainfall intensity of 120 mm·h-1. The field test with long-term monitoring (three years) confirmed the M-CMC can effectively control erosion of silty sand slopes for a prolonged period of time.

Effects of several polymeric materials on the improvement of the sandy soil under rainfall simulation

Efficacy of Natural Polymer Derivatives on Soil Physical Properties and Erosion on an Experimental Loess Hillslope

Molecular Dynamics Study of Polymeric Stabilizers As Soil Improvement Materials

Improvement of Water Stability of Sand Admixed with Water-Soluble Organic Polymer

Effects of different polymer hydrogels on moisture capacity of sandy soil

Impact of polymer mixtures on the stabilization and erosion control of silty sand slope

Study on the Stabilization Mechanisms of Clayey Slope Surfaces Treated by Spraying with a New Soil Additive

Effect of polymer water retaining agent on physical properties of silty clay

Cracking and erosion behaviors of sand-clay mixtures stabilized with microbial biopolymer and palm fiber

Effects of polyacrylamide on soil erosion and nutrient losses from substrate material in steep rocky slope stabilization projects

Soil stabilization using synthetic polymer for soil slope ecological protection

Improving Soil-Water Characteristics and Pore Structure of Silty Soil Using Nano-aqueous Polymer Stabilisers

Influence of Polyurethane Polymer on the Strength and Mechanical Behavior of Sand-root Composite

Effectiveness of a New Organic Polymer Sand-Fixing Agent on Sand Fixation

An Eco-Friendly Polymer Composite Fertilizer for Soil Fixation, Slope Stability, and Erosion Control

Effect of Polyurethane on the Stability of Sand–clay Mixtures

Using Polyvinyl Alcohol as Polymeric Adhesive to Enhance the Water Stability of Soil and its Performance

Studies on Polymeric Soil Structure Amendments III.Amelioration to Lateritic Red Soil by Polyacrylamide

Impacts of Natural Polymer Derivative Neutral Polysaccharide Jag S and Cationic Hydroxypropyl Polysaccharide Jag C162 on Rainfall Infiltration on an Experimental Loess Hillslope

Experimental Study on PVA-MgO Composite Improvement of Sandy Soil

Analysis of the mechanical properties and micro-reinforcement mechanisms of loose accumulated sandy soil improved with polyvinyl alcohol and sisal fiber