Abstract:The commercial, CO2-intensive, propylene generation process is challenged by a low equilibrium yield, costly separation processes, and severe carbon deposition. Oxidative dehydrogenation (ODH) of propane offers a promising alternative; however, its potential is hampered by the undesirable over-oxidation of propylene to carbon oxides. Chemical looping approaches have been used, where a metal oxide reacts with propane and/or hydrogen – instead of O2 – which can avoid over-oxidation of the hydrocarbons to carbon oxides. Oxygen can then react with the reduced solid product to regenerate it to a stoichiometric oxide. However, solid chemical looping catalysts have a low oxygen carrying capacity, often less than 1 % in order to avoid cyclic deactivation, arising from changes to the lattice structure in each cycle. Herein, we report the use of molten metals as chemical looping catalysts, where the catalyst completely reduces to metallic form and melts each half-cycle. A high oxygen capacity is possible, and melting reduces lattice strain upon reduction. Thermodynamic calculations indicate that 21 individual metal candidates could be viable, and the most promising 14 are experimentally compared. Bi-Sn had the highest conversion, and 50-50 mol% Bi-Sn was supported in a fixed-bed reactor. This resulted in 22 % propylene yield at 600 °C, compared to a 20 % yield from the reference using borosilicate beads at the same temperature. After 10 cycles with separate flows of O2 followed by C3H8, totaling 37 hours on stream, no deactivation was observed. Enhanced propylene selectivity was observed using a 50-50 mol% Bi-Sn molten mixture, surpassing the performance of Bi or Sn alone, and leading to reduced carbon oxide formation. This improved selectivity occurred with both co-fed and pre-oxidized catalysts, suggesting the creation of a unique metal oxide selectively generating propylene while minimizing overoxidation to carbon oxides. Additionally, the oxygen conversion over the Bi-Sn alloy was lower than over Bi or Sn separately when co-feeding propane and oxygen. Selectivity to cracked products was high for most of the active melts tested, especially above 550 °C.

Techno-economic analysis of bromine mediated propane oxidative dehydrogenation to produce propylene

From microkinetic model to process: understanding the role of the boron nitride surface and gas phase chemistry in the oxidative dehydrogenation of propane

Propane Oxidative Dehydrogenation Catalyzed by Molten Metal Alloys

Self-evolved BOx Anchored on Mg2B2O5 Crystallites for High-Performance Oxidative Dehydrogenation of Propane

Conceptual design and techno-economic analysis of a novel propane dehydrogenation process integrated with chemical looping combustion and CO 2 hydrogenation

Modeling of Propane Dehydrogenation Combined with Chemical Looping Combustion of Hydrogen in a Fixed Bed Reactor

Research Progress on Propylene Preparation by Propane Dehydrogenation

Process optimization, exergy efficiency, and life cycle energy consumption-GHG emissions of the propane-to-propylene with/without hydrogen production process

Advancements of MOFs in the Field of Propane Oxidative Dehydrogenation for Propylene Production

Spatial decoupling of bromide-mediated process boosts propylene oxide electrosynthesis

Simulation and analysis of oxidative dehydrogenation of propane to propene

Combining CO2 Reduction with Propane Oxidative Dehydrogenation over Bimetallic Catalysts

One-step High-Yield Production of Renewable Propene from Bioethanol over Composite ZnCeOx Oxide and HBeta Zeolite with Balanced Brönsted/Lewis Acidity

Research progress of CO2 oxidative dehydrogenation of propane to propylene over Cr-free metal catalysts

Modulating Electron Density of Boron–Oxygen Groups in Borate via Metal Electronegativity for Propane Oxidative Dehydrogenation

Alkali metal halide-coated perovskite redox catalysts for anaerobic oxidative dehydrogenation of n-butane

Efficient conversion of propane in a microchannel reactor at ambient conditions

Catalysts development for O2-assisted oxidative dehydrogenation of propane to propylene

Self-evolved BO anchored on Mg2B2O5 crystallites for high-performance oxidative dehydrogenation of propane

Process Simulation and Optimization of Propane Dehydrogenation Combined with Selective Hydrogen Combustion

Photo-Thermal Synergistic Catalytic Oxidative Dehydrogenation of Propane over a Spherical Superstructure of Boron Carbon Nitride Nanosheets