Abstract:As a new element of flame, tubular flame especially the swirl type has excellent flame characteristics such as negligible heat loss, aerodynamic stability and thermodynamic stability. The premixed swirl type tubular flame has been extensively studied through a variety of burners, and various applications have been proposed and demonstrated for determining the flammability limits, stabilizing a flame in a high speed flow, and obtaining a uniform and large-area laminar flame to heat iron slab or to reduce steel sheet surface. To avoid potential hazards of flame flash back even detonation in premixed mode, an inherently safe technique of rapidly mixed tubular flame combustion has proposed, in which the fuel and the oxidizer are individually and tangentially injected into a cylindrical burner from four rectangular slits. Recently this burner has been successfully adopted to investigate the characteristics of oxygen enhanced combustion of methane, which provides a useful tool to save energy and reduce emissions. The results illustrate that the mixing of fuel and oxidizer plays a vital role in obtaining a stable tubular flame. To fundamentally investigate the flow field especially the mixing process in the rapidly mixed tubular flame burner, a series of measurements have been made on the flow visualization and velocity distribution with a Particle Image Velocimetry (PIV) system. Two groups of optically accessible quartz burners were designed: in the first group, the width of the rectangular slit was maintained as 2 mm while the length varied from 8 to 64 mm, in which the swirl number (Sw) varied from 2.75 to 0.34; in the second group, the slit width increased from 1 to 3 through 2 mm while maintaining the slit length as 8 mm, in which the swirl number decreased from 5.89 to 1.70 through 2.75. The total flow rate and the mean injection velocity ratio of fuel inlet to oxidizer inlet were also varied to measure the mixing layer thickness through flow visualization in a cross section perpendicular to the tube axis around the center of the burner. Detailed observation shows that the mixing layer thickness around the inlet is dominated by a boundary layer type flow regardless of swirl number and injection velocity ratio. The coefficients for the thickness estimation based on the square root of injection velocity (in reverse relationship) have been summarized. In addition, for a constant total flow rate, the mixing is fastest when the mean injection velocity of each inlet is the same. The flow visualization and the axial velocity distribution in a plane containing the tube axis were also analyzed to illustrate the flow motion downstream of the injection slits. The results demonstrate that a reverse flow appears in the burners of swirl number larger than 0.60.

Flame propagation patterns and local flame features of an annular combustor with multiple centrally staged swirling burners

Local Flame And Flow Properties Of Propagating Premixed Turbulent Flames During Light-Round Process In A Micca-Type Annular Combustor

Experimental Investigation of the Flame Front Propagation Characteristic During Light-round Ignition in an Annular Combustor

Spray Swirling Flame Dynamic under Combined Modulation of Air and Fuel

Experimental Investigation on the Ignition Dynamics of an Annular Combustor with Multiple Centrally Staged Swirling Burners

Multi-bifurcation behaviors of stability regimes in a centrally staged swirl burner

Experimental investigation of the ignition dynamics in an annular premixed combustor with oblique-injecting swirling burners

Experimental and Numerical Study of a Two-Stage Swirl Burner

Analysis of flame propagation mechanisms during light-round in an annular spray flame combustor: the impact of wall heat transfer and two-phase flow

Ignition Dynamics in an Annular Combustor with Gyratory Flow Motion

Spray flames in an air-heptane swirling combustor

Flame dynamics and combustion instability induced by flow-flame interactions in a centrally-staged combustor

Experimental study of stratified swirl flame dynamics in a model gas turbine combustor

Investigation into ignition and flame propagation in a combustor with prefilming and non-prefilming atomization

Progress on light-round ignition dynamics in annular combustor

Flame interactions in a stratified swirl burner: flame stabilization, combustion instabilities and beating oscillations

An Experimental Study on the Flow Visualization in Rapidly Mixed Tubular Flame Burners of Various Swirl Numbers

Study on the flow characteristics and oscillating mechanism of a swirl flame

Large Eddy Simulation of Flame Propagation During the Ignition Process in an Annular Multiple-Injector Combustor

Design and Decomposition Analysis of Mixing Zone Structures on Flame Dynamics for a Swirl Burner

Predicting the Ignition Sequences in a Separated Stratified Swirling Spray Flame with Stochastic Flame Particle Tracking