Abstract:Utilising cooling stimulation as a thermal excitation means has demonstrated profound capabilities of detecting sub-surface metal loss using thermography. Previously, a prototype mechanism was introduced which accommodates a thermal camera and cooling source and operates in a reciprocating motion scanning the test piece while cold stimulation is in operation. Immediately after that, the camera registers the thermal evolution. However, thermal reflections, non-uniform stimulation and lateral heat diffusions will remain as undesirable phenomena preventing the effective observation of sub-surface defects. This becomes more challenging when there is no prior knowledge of the non-defective area in order to effectively distinguish between defective and non-defective areas. In this work, the previously automated acquisition and processing pipeline is re-designed and optimised for two purposes: 1-Through the previous work, the mentioned pipeline was used to analyse a specific area of the test piece surface in order to reconstruct the reference area and identify defects. In order to expand the application of this device over the entire test area, regardless of its extension, the pipeline is improved in which the final surface image is reconstructed by taking into account multiple segments of the test surface. The previously introduced pre-processing method of Dynamic Reference Reconstruction (DRR) is enhanced by using a more rigorous thresholding procedure. Principal Component Analysis (PCA) is then used in order for feature (DRR images) reduction. 2-The results of PCA on multiple segment images of the test surface revealed different ranges of intensities across each segment image. This potentially could cause mistaken interpretation of the defective and non-defective areas. An automated segmentation method based on Gaussian Mixture Model (GMM) is used to assist the expert user in more effective detection of the defective areas when the non-defective areas are uniformly characterised as background. The final results of GMM have shown not only the capability of accurately detecting subsurface metal loss as low as 37.5% but also the successful detection of defects that were either unidentifiable or invisible in either the original thermal images or their PCA transformed results.

PECULIARITIES OF THE APPLICATION OF THERMOGRAPHIC DEFECTOSCOPY FOR STEEL BUILDING STRUCTURES TAKING INTO ACCOUNT THEIR REAL STATE UNDER OPERATION CONDITIONS

APPLICATION OF ACTIVE THERMOGRAPHY FOR DEFECTOSCOPY OF TECHNOLOGICAL EQUIPMENT ON OBJECTS OF THE NUCLEAR POWER PLANTS

Mechanical Fault Detection in Steel Plant with Infrared Thermography: Field Cases

Thermal pulse video thermography nondestructive testing of the defects in carbon steel

Optical Detection of Phase Transformations in Steels: An Innovative Method for Time-Efficient Material Characterization During Tailored Thermo-mechanical Processing of a Press Hardening Steel

Applications of thermal imaging camera for assessing structural integrity

Nondestructive evaluation of carbon fiber reinforced polymer (CFRP)-steel interfacial debonding using eddy current thermography

Periodic Pulsed Thermography for Inner Defects Detection of Lead-Steel Bonded Structure

Defect Automatic Identification of Eddy Current Pulsed Thermography

Estimation of Structural Degradation of the Heat Affected Zone of the Welded Joint Under Fatigue

Eddy Current Pulsed Thermography for Steel Corrosion Characterization

Automatic Defect Detection Based on Segmentation of Pulsed Thermographic Images

An equivalent circuit approach for remnant thickness evaluation and flaw sizing using pulsed thermography

Acquisition of Thermal Field of Spatial Steel Structure Based on Temperature Measurements

Detection and quantification of corrosion defects in CFRP-strengthened steel structures based on low-power vibrothermography

On the defect detection limits of flash thermography in reflection mode: A comprehensive parametric 3D FE study

Investigation of the Peculiarities of Deformation and Fracture of Metals Obtained on the Basis of 3D Printing with Registration of an Acoustic Emission Signal

An Automated Pipeline for Dynamic Detection of Sub-Surface Metal Loss Defects across Cold Thermography Images

Active Infrared Thermography for Interfacial Defects Detection on Composite Cross-Arms Based on Finite Element Simulation

Simultaneous inspection of multi-kind defects in adhesively bonded CFRP/steel structures by inductive thermography

Influence of Internal Technological Defects on the Mechanical Properties of Structural CFRP