Abstract:The rapid development of wearable electronics, humanoid robots, and artificial intelligence requires sensors to sensitively and stably detect external stress variations in large areas or on three-dimensional (3D) irregularly shaped surfaces while possessing the comfort. Most importantly, the flexibility and 3D compliance of sensors, and the fitting state of the interface between the sensor and the object are of great significance to the sensing accuracy and reliability. The ordered or random stacking and entangling of flexible and electrically conductive fiber materials can form a highly porous and mechanically stable fiber assembly. The changes in external stress can lead to the air trapped in the fiber assembly to flow in and out rapidly and repeatedly, as well as the reversible mechanical deformation of fiber materials. Correspondingly, the contact areas between electrically conductive fibers in the fiber assembly are reversibly changed, which makes the conductive and flexible fiber assembly be an ideal candidate for piezoresistive sensing material. It can be further expected that the statistical stability of contact points between conductive fibers under the stress may significantly increase with the decrease in fiber diameters. Herein, a new method to make a flexible piezoresistive sensor with conductive and porous fiber assembly was proposed. An ultrasensitive piezoresistive material was facilely prepared by fabricating conductive poly(vinyl alcohol-<i>co</i>-ethylene) (EVOH) nanofiber assemblies. The sensing performance of the piezoresistive sensor was optimized by regulating the nanofiber morphology, electrical conductivity, and mechanical properties. The flexible piezoresistive sensor exhibited a sensitivity of 2.79 kPa<sup>–1</sup>, a response time of 3 ms, and a recovery time of 10 ms. The sensing performance at different working frequencies was stable and durable within 4500 cycling tests. The flexible sensor showed good pressure-sensing accuracy and reliability when used on irregular surfaces and therefore was further applied in the static monitoring of large-area spatial pressure distribution and the wearable intelligent interactive device, demonstrating great application potential.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c10516?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c10516</a>.SEM images, water transmission ability, stability, the resistance change of the CNA while stretching and bending, optimized sensing performance of CNA, and the calculation model analysis of the CNA (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c10516/suppl_file/am0c10516_si_001.pdf">PDF</a>)Recording of the specific example of the corresponding zoom-in and zoom-out functions when the fingers perform the opening and merging operations (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c10516/suppl_file/am0c10516_si_002.mp4">MP4</a>)This article has not yet been cited by other publications.

Environmentally Friendlier Printable Conductive and Piezoresistive Sensing Materials Compatible with Conformable Electronics

Stretchable Conductive Inks with Carbon‐Based Fillers for Conformable Printed Electronics

Towards the fabrication of fully printed flexible P(VDF-TrFE)-based piezoelectric sensors

Aqueous Conductive Polymer Composites with Good Printability and Conductivity for Flexible Electronics

Deep Eutectic Solvent Induced Porous Conductive Composite for Fully Printed Piezoresistive Pressure Sensor

Reshapeable, rehealable and recyclable sensor fabricated by direct ink writing of conductive composites based on covalent adaptable network polymers

Printable and Recyclable Conductive Ink Based on a Liquid Metal with Excellent Surface Wettability for Flexible Electronics

Flexible and Stretchable Electrically Conductive Polymer Materials for Physical Sensing Applications

Environmentally Friendly Graphene‐Based Conductive Inks for Multitouch Capacitive Sensing Surfaces

3D-Printable Carbon Nanotubes-Based Composite for Flexible Piezoresistive Sensors

A Self-Healable, Highly Stretchable, and Solution Processable Conductive Polymer Composite for Ultrasensitive Strain and Pressure Sensing

Flexible, recyclable and sensitive piezoresistive sensors enabled by lignin polyurethane-based conductive foam

Ecofriendly Polymer–Graphene‐Based Conductive Ink for Multifunctional Printed Electronics

3D printed piezoelectric BNNTs nanocomposites with tunable interface and microarchitectures for self-powered conformal sensors

3D printing interface-modified PDMS/MXene nanocomposites for stretchable conductors

A stretchable and printable PEDOT:PSS/PDMS composite conductors and its application to wearable strain sensor

Micro‐3D Printed Conductive Polymer Composite via Two‐Photon Polymerization for Sensing Applications

Flexible Sensors Based on Conductive Polymers

Electrically Conductive and Highly Stretchable Piezoresistive Polymer Nanocomposites via Oxidative Chemical Vapor Deposition

Breathable and Large Curved Area Perceptible Flexible Piezoresistive Sensors Fabricated with Conductive Nanofiber Assemblies

Reprocessable 3D-Printed Conductive Elastomeric Composite Foams for Strain and Gas Sensing