Abstract:the quasi-static problem is discussed. The equations of the incremental theory of plasticity are used to describe fast deformation. The numerical simulation method is implemented based on the use of the Arbitrary Lagrange-Euler (ALE) approach, in which the sequence of boundary value problems in the current configuration of the solid is solved using the Finite Element Method. An axisymmetric finite element of a triangular cross-section was used for modeling. The main system of equations is presented, which, when using the Finite Element Method, describes the deformation of axisymmetric bodies in the current configuration. At each stage of the calculation in the current configuration, the initial problem is solved numerically using the finite difference method. When the limiting value of the strain tensor components is reached, according to the ALE algorithm, the finite element model is rebuilt with the implementation of new boundary conditions. To build a computational model, the RD program was used, in which a two-dimensional model of a section of an axisymmetric body is surrounded by a mesh of special elements. A presented approach for the implementation of the specified boundary conditions of an axisymmetric body in finite element modeling is discussed. Calculations of irreversible deformation were carried out in a program developed on the basis of using the FEM Creep software package in the case of finite strains. Comparison of the numerical simulation data with the experimental results of other authors, obtained in the investigations of the explosive loading of aluminum rings set on a sphere, is presented. The experimental data are processed and the constants included in the constitutive equation, using the hardening law, are determined. Satisfactory agreement between the calculated and experimentally obtained values of the radial strain of the rings at different times is shown. Key words: numerical simulation, axisymmetric problem, finite strains, FEM, program, explosive loading, aluminum alloy.

Numerical Modeling of Elastic Hysteresis of Loose Material

Numerical Simulations of Granular Material Behavior under Rotation of Principal Stresses: Micromechanical Observation and Energy Consideration

Modeling of the Stress-Dependent Hysteretic Dynamics of Ferroelectric Materials

A Differential Algebraic Approach for the Modeling of Polycrystalline Ferromagnetic Hysteresis with Minor Loops and Frequency Dependence

Review on Hysteretic Modeling Methods of Giant Magnetostrictive Materials

Incremental behavior of granular soils: a strain response envelope perspective

Modelling the inelastic constitutive behaviour of multi-layer spiral strands. Comparison of hysteresis operator approach to multi-scale model

A modeling method for elastic-viscous-plastic material with fractal structure and its solution

Modeling Mechanical Behavior of Very Coarse Granular Materials

Learning Elastic Constitutive Material and Damping Models.

Analytical and Numerical Modeling of Elastic Moduli for Cement Based Composites with Solid Mass Fractal Model

Modelling energy dissipation and hysteresis of woven fabrics with large deformation under single loading-unloading cycle

A Calculation Method for Static Hysteresis Loop and its Applications

Modeling For Stress-Dependent Hysteresis Nonlinearity In Giant Magnetostrictive Actuator

Three-dimensional granular flow continuum modeling via material point method with hyperelastic nonlocal granular fluidity

A mathematical model for the hysteresis in shape memory alloys

Evolution Prediction of Hysteresis Behavior of Sand under Cyclic Loading

Analytical model for the approximation of hysteresis loop and its application to the scanning tunneling microscope

Numerical Simulation of Failure Process in Heterogeneous Elastoplastic Materials

Numerical modeling of the processes of irreversible deformation of rings under explosive loading

Modeling linear and nonlinear viscoelastic oscillatory rheometric stress-strain hysteresis of asphalt binders