Abstract:The classical models used for describing the behavior of woven fabrics do not fully account for the whole set of phenomena that occur during the testing of such materials. This lack of precision is mainly due to the absence of energy terms related to the microstructural properties of the fabric and, in particular, to the bending stiffness of the yarns. In this paper it is shown that in the unbalanced fabrics the different bending stiffnesses of the warp and weft yarns produce macroscopic effects that are extremely visible as, for example, the asymmetric S-shape during a Bias Extension Test (BET). We propose to introduce a constrained micromorphic model and a discrete model that are able to account for i) the angle variation between warp and weft tows, ii) the unbalance in the bending stiffness of the yarns and iii) the relative slipping of the tows. The constrained micromorphic model is framed in the spirit of the Principle of Virtual Powers for the equilibrium of continuum bodies. A suitable constraint is introduced by means of Lagrange multipliers in the strain energydens ity and the resulting constrained model tends a particular second gradientone. The main advantage of using such constrained micromorphic model is that the kinematical and traction boundary conditions that can be imposed on the boundary of the considered body take a natural and unique meaning. The discrete model is set up by opportunely interconnecting Euler-Bernoulli beams with different bending stiffnesses in the two directions by means of rotational and translational elastic springs. The main advantage of such discrete model is that the slipping of the tows is described in a rather realistic way. Suitable numerical simulations are presented for both the continuum and the discrete models and a comparison between the simulations and the experimental results is made showing a definitely good agreement.

Modelling energy dissipation and hysteresis of woven fabrics with large deformation under single loading-unloading cycle

Progressive failure analysis of 2D woven composites at the meso-micro scale

J2-deformation-type Soil Model Coupled with State-Dependent Dilatancy and Fabric Evolution: Multiaxial Formulation and FEM Implementation

A viscoelastic-plastic model for the temperature-dependent creep and recovery behavior during dry fiber fabric compaction

A deformation model and draping behavior analysis of plain weave fabric with low-twist yarn on continuous surface

A Computationally Efficient Model to Predict the Uniaxial Tensile Loading Response for Dry Woven Fabrics

Modeling Analysis of Complex Deformation of Woven Coating Film during the Cyclic Tensile Process

Meso-scale modeling and damage analysis of carbon/epoxy woven fabric composite under in-plane tension and compression loadings

Continuum and discrete models for unbalanced woven fabrics

Improved hyperelastic model for simulating the forming of biaxial braided fabrics

A novel modeling method for the mechanical behavior of 3D woven fabrics considering yarn distortion

Discrete Element Method Models of Elastic and Elastoplastic Fiber Assemblies

Meso-macro simulation of the woven fabric local deformation in draping

Modeling of the cyclic visco-elasto-plastic one-dimensional behavior of polyamide-based woven straps

A simplified constitutive and finite element model of plain weave fabric reinforcements for the biaxial loading

Modeling the flexural rigidity of spunlace nonwoven fabrics

A yarn-scale woven fabric model including significant slippage formulated within the Arbitrary Lagrangian Eulerian framework

Progressive damage modelling and experimental investigation of three-dimensional orthogonal woven composites with tilted binder

Response surface analysis of biaxial mechanical properties and elastic parameters for woven fabric composites

A deformation procedure using position-based dynamics to optimize the geometric model of woven fabrics

Modelling the inelastic constitutive behaviour of multi-layer spiral strands. Comparison of hysteresis operator approach to multi-scale model