Abstract:In this study, it is reported that various properties can be selectively derived in a pure (K0.5Na0.5)NbO3, KNN ceramics through optimizing the sintering temperature by the conventional sintering method. High piezoelectric, ferroelectric, and dielectric properties such as d33 = 127 pC/N, Pr = 31 mu C/cm2, and epsilon r = 767 are obtained at the sintering temperature of 1100 degrees C. On the contrary, the specimen sintered at 1130 degrees C does not show high piezoelectric and ferroelectric properties, but it is translucent with a transmittance of 22% and 57% at the wavelength of 800 and 1600 nm respectively and shows a very high dielectric constant epsilon r of 881. The origin of the high piezoelectric constant owes to large remanent polarization and dielectric constant, and dense microstructure with uniform distribution of large grains with the conjunction of relatively large crystal anisotropy. On the other hand, dense microstructure with almost no porosity, highly compacted grain boundaries, uniform distribution of grains, and relatively low crystalline anisotropy are responsible for the translucency and large dielectric constant of the ceramic specimens. This study demonstrates that the lead-free KNN ceramic has the potential to show multiple noteworthy properties such as piezoelectric, ferroelectric, dielectric, and transparent properties. This work provides a pure KNN ceramic simultaneously with high piezoelectric and transparent characteristics prepared only by using the conventional sintering method at a moderate sintering temperature for the first time in the literature.

3D printed Er3+ doped KNNLN piezoelectric ceramics for transparent ultrasonic transducer application

Enhanced transmittance and piezoelectricity of transparent K0.5Na0.5NbO3 ceramics with Ca(Zn1/3Nb2/3)O3 additives

Tetragonal Er3+ -Doped (K0.48na0.48li0.04)(nb0.96bi0.04)o-3: Lead-free Ferroelectric Transparent Ceramics with Electrical and Optical Multifunctional Performances

Enhanced Piezoelectric Performance and Thermal Stability of Alkali Niobate-Based Ceramics

Effect of CaZrO3 on phase structure and electrical properties of KNN-based lead-free ceramics

ittance and piezoelectricity of transparent K 0 . 5 Na 0 . 5 NbO 3 ceramics with Ca ( Zn 1 / 3 Nb 2 / 3 ) O 3 additives

Enhanced Piezoelectric Properties and Temperature-Insensitive Strain Behavior of < 001 > -Textured Knn-Based Ceramics

Coexistence of Excellent Piezoelectric Performance and Thermal Stability in KNN-based Lead-Free Piezoelectric Ceramics

Simultaneously Enhanced Piezoelectric Response and Piezoelectric Voltage Coefficient in Textured KNN‐based Ceramics

Photoluminescence, Electro-Optic Response and Piezoelectric Properties in Pressureless-Sintered Er-Doped Knn-Based Transparent Ceramics

Photoluminescence, Ferroelectric, Dielectric and Piezoelectric Properties of Sol-Gel-Derived Er-Doped KNN-LN Lead-Free Multifunctional Ceramics

Studies on the preparation and properties of LiNbO2 modified KNN lead-free piezoelectric ceramics

Simultaneous Realization of High Transparency and Piezoelectricity in Low Symmetry KNN‐based Ceramics

Enhanced transmittance and piezoelectricity of transparent K<sub>0.5</sub>Na<sub>0.5</sub>NbO<sub>3</sub> ceramics with Ca(Zn<sub>1/3</sub>Nb<sub>2/3</sub>)O<sub>3</sub> additives

Improved Ferroelectric, Piezoelectric, and Dielectric Properties in Pure KNN Translucent Ceramics by Optimizing the Normal Sintering Method

High-performance potassium sodium niobate piezoceramics for ultrasonic transducer

A Compromise Between Piezoelectricity and Transparency in KNN-based Ceramics: the Dual Functions of Li2O Addition

Improved Piezoelectricity and Luminescence Behavior in Er2O3 Doped (k,na)nbo3 Ceramics

Boosting Piezoelectric Response of KNN‐based Ceramics with Strong Visible‐light Absorption

New KNN-based lead-free piezoelectric ceramic for high-frequency ultrasound transducer applications

Tailoring micro-structure of eco-friendly temperature-insensitive transparent ceramics achieving superior piezoelectricity