Abstract:Abstract Large-size mandible graft has huge needs in clinic caused by infection, tumor, congenital deformity, bone trauma and so on. However, the reconstruction of large-size mandible defect is challenged due to its complex anatomical structure and large-range bone injury. The design and fabrication of porous implants with large segments and specific shapes matching the native mandible remain a considerable challenge. Herein, the 6% Mg-doped calcium silicate (CSi-Mg6) and β- and α-tricalcium phosphate (β-TCP, α-TCP) bioceramics were fabricated by digital light processing as the porous scaffolds of over 50% in porosity, while the titanium mesh was fabricated by selective laser melting. The mechanical tests showed that the initial flexible/compressive resistance of CSi-Mg6 scaffolds was markedly higher than that of β-TCP and α-TCP scaffolds. Cell experiments showed that these materials all had good biocompatibility, while CSi-Mg6 significantly promoted cell proliferation. In the rabbit critically sized mandible bone defects (∼13 mm in length) filled with porous bioceramic scaffolds, the titanium meshes and titanium nails were acted as fixation and load bearing. The results showed that the defects were kept during the observation period in the blank (control) group; in contrast, the osteogenic capability was significantly enhanced in the CSi-Mg6 and α-TCP groups in comparison with the β-TCP group, and these two groups not only had significantly increased new bone formation but also had thicker trabecular and smaller trabecular spacing. Besides, the CSi-Mg6 and α-TCP groups showed appreciable material biodegradation in the later stage (from 8 to 12 weeks) in comparison with the β-TCP scaffolds while the CSi-Mg6 group showed much outstanding mechanical capacity in vivo in the early stage compared to the β-TCP and α-TCP groups. Totally, these findings suggest that the combination of customized strength-strong bioactive CSi-Mg6 scaffolds together with titanium meshes is a promising way for repairing the large-size load-bearing mandible defects.

Three-dimensional printed titanium mesh combined with iliac cancellous bone in the reconstruction of mandibular defects secondary to ameloblastoma resection

Application of CAD/CAM Techniques in Mandible Large-Scale Defect and Reconstruction with Vascularized Fibular Bone Graft

[Application of Three-Dimensional Printing Technique in Repair and Reconstruction of Maxillofacial Bone Defect].

[Application of Computer Aided Design-Computer Aided Manufacture Technique in Mandible Defect Reconstruction with Individual Titanium Prosthesis].

[Application of Computer Aided Design/computer Aided Manufactured Techniques in Mandible Defect Reconstruction].

[The application of three dimensional craniomaxillofacial model in the restoration of mandibular bone defects with vascularized fibular autograft].

Application of 3D printed titanium mesh and digital guide plate in the repair of mandibular defects using double-layer folded fibula combined with simultaneous implantation

The comprehensive on-demand 3D bio-printing for composite reconstruction of mandibular defects

3D-Printed Porous Titanium Augments for Reconstruction of Massive Bone Defect in Complex Revision Total Knee Arthroplasty: Implant Design and Surgical Technique

[Reconstruction of Maxillary Defect by Prefabricated Titanium Mesh Combined with Pedicled Buccal Fat Pad Flap and Bone Autograft].

Virtual Planning and 3D printing modeling for mandibular reconstruction with fibula free flap

[Digital and Three-Demention Print Technique in Reconstruction for Complex Defect after Resection of Jaw Neoplasms].

Comparative evaluation of personalized 3D-printed scaffold-driven double-barrel fibula flap for the reconstruction of segmented mandibular defects

Advanced biomaterials for repairing and reconstruction of mandibular defects

Single-stage Computer-Assisted Approach for Tumour Resection and Functional Restoration of Brown Class III Maxillary Defects-Titanium Mesh and Zygomatic Implants Combined with Vascularized Anterolateral Thigh Flap.

Electron beam melting in the fabrication of three-dimensional mesh titanium mandibular prosthesis scaffold

Customized bioceramic scaffolds and metal meshes for challenging large-size mandibular bone defect regeneration and repair

[Application of individual prefabricated reconstructive titanic plate combined with vascularized iliac bone-muscular flap for reconstruction of mandibular defects]

Virtual Surgical Planning and Customized Subperiosteal Implant for Reconstruction of Maxillary Defect After Oncological Resection

Accurate Reconstruction of Mandibular Defects with Vascularized Bone Flaps Through Utilization of Mandible Space-Retention Guides

Finite element analysis and clinical application of 3D-printed Ti alloy implant for the reconstruction of mandibular defects