Abstract:As one of the world's most fragile and sensitive ecological regions, Xizang risks significant environmental damage from using traditional materials, including cement and lime, to improve and reinforce loose accumulated sandy soil slopes. To address this issue, this study utilized a low-concentration biodegradable polyvinyl alcohol (PVA) solution combined with sisal fibers (SFs) to stabilize loose accumulated sand in southeastern Xizang. A series of physical, mechanical, and microscopic analyses was conducted to evaluate the properties of the treated sand. The results indicated the following. 1) The stress-strain curves of the improved samples exhibited an elastic-plastic relationship. Failure was observed in two stages. At a strain of 3% or less, the samples demonstrated elastic deformation with a linear increase in stress, whereas the deviator stress increased rapidly and linearly with an increase in axial strain. Once the strain exceeded 3%, the deformation became plastic with a nonlinear increase in the stress-strain relationship, and the growth rate of the deviator stress gradually decreased and leveled off. 2) Under varying confining pressure conditions, the relationship curve between the maximum (σ 1 -σ 3 ) max ∼σ 3 for both untreated loose accumulated sandy soil and soil improved with the PVA solution, and the sisal fiber was approximately linear. 3) The SFs created a skeletal-like network that encased the soil particles, and the hydroxyl functional groups in the PVA molecules bonded with both the soil particles and the fiber surface, thereby enhancing the interfacial properties. This interaction resulted in a tighter connection between the soil particles and SFs, which improved the stability of the structure. 4) The incorporation of a PVA solution and SFs significantly enhanced the mechanical strength and deformation resistance of the loose accumulated sandy soil. The optimal ratio for the improved soil was S P = 3% and S L = 15 mm, which increased the cohesion from 24.54 kPa in untreated loose accumulated sandy soil to 196.03 kPa. These findings could be applied in engineering practices to improve and reinforce loose accumulated sandy soil slopes in southeastern Xizang and provide a theoretical basis for such applications.

Rock‐Like Strength Enhancement of Indian Desert Sand Using Commercially Available Polysaccharide Biopolymers

Biopolymer based stabilization of Indian desert soil against wind-induced erosion

The Role of Biopolymers on the Water Retention Capacity of Stabilized Sand

Synergistic effect of Polyvinyl Acetate (PVA) and Enzyme-Induced Carbonate Precipitation (EICP) on the mechanical properties of natural sands

Efficacy of Acacia Gum Biopolymer in Strength Improvement of Silty and Clay Soils under Varying Curing Conditions

Improvement of soil shear strength using glucomannan biopolymer for loose sand

Desert silty sand modified by anionic PAM and ordinary portland cement: Microfabric reinforcement and durability

The Optimisation Analysis of Sand-Clay Mixtures Stabilised with Xanthan Gum Biopolymers

Performance of environmentally friendly biopolymer-natural fiber on post-freeze–thaw behavior on silty sand: macro- and micro analysis

Polyacrylamide hydrogel application in sand control with compressive strength testing

An anionic biopolymer γ-polyglutamate enhanced the microbially induced carbonate precipitation for soil improvement: mechanical behaviors and underlying mechanism

Experimental investigation of sandy soil stabilization using chitosan biopolymer

The Effect of Polymer-Fiber Stabilization on the Unconfined Compressive Strength and Shear Strength of Sand

Influence of Polyurethane Polymer on the Strength and Mechanical Behavior of Sand-root Composite

Effectiveness of a New Organic Polymer Sand-Fixing Agent on Sand Fixation

Strength and Fracture Properties of Sandy Subgrade Soil Treated with Sodium Polystyrene Sulfonate

Enhancing Load-Bearing Capacity of Calcareous Sands through Gel Stabilization: A Mechanical and Material Characterization Study

Experimental Study on Cyclic Behavior of Aeolian Sand Stabilized with Geopolymer and Fines

Cracking and erosion behaviors of sand-clay mixtures stabilized with microbial biopolymer and palm fiber

Polypeptide additives for improving the performance of microbially induced calcite precipitation (MICP) sand consolidation

Analysis of the mechanical properties and micro-reinforcement mechanisms of loose accumulated sandy soil improved with polyvinyl alcohol and sisal fiber