Abstract:In this study, we describe a novel high throughput, micro-macro approach for the identification and efficient design of biopolymer stabilized soil systems. At the "microscopic" scale, we propose a rapid Membrane Enabled Bio-Mineral Affinity Screening (MEBAS) approach supported by Mineral Binding Characterization (MBC) (TGA, ATR-FTIR and ζ Potential), while at the "macroscopic" scale, micro scale results are confirmed by Geotechnical Verification (GV) through unconfined compression testing. We illustrate the methodology using an exemplar mine tailings Fe2O3–SiO2 system. Five different biopolymers were tested against Fe2O3: locust bean gum, guar gum, gellan gum, xanthan gum, and sodium carboxymethyl cellulose. The screening revealed that locust bean gum and guar gum have the highest affinity for Fe2O3, which was confirmed by MBC and in agreement with GV. This affinity is attributed to the biopolymer's ability to form covalent C–O–Fe bonds through β-(1,4)-d-mannan groups. Upon their 1% addition to a "macroscopic" Fe2O3 based exemplar MT system, unconfined compressive strengths of 5171 and 3848 kPa were obtained, significantly higher than those for the other biopolymers and non-Fe systems. In the current study, MEBAS gave an approximately 50-fold increase in rate of assessment compared to GV alone. Application of the proposed MEBAS–MBC-GV approach to a broad range of soil/earthwork components and additives is discussed.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.est.0c02001?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.est.0c02001</a>.Typical Mine Tailing ore, mineral composition, and pH (Figure S1); LB, GG, XG, Ge, CMC biopolymer characteristics (Figure S2); UCS of LB & GG stabilized samples upon a variation in initial moisture content (Figure S3); UCS of GG stabilized samples upon a variation in additive solution preparation conditions and curing times (Figure S4); example method to determine biopolymer average monomer molecular weight (Figure S5); typical biopolymer additive solution preparation conditions (Figure S6); schematic showing MEBAS methodology used to quantify biomineral interactions (Figure S7); Moisture Content Retention (%) of biopolymer stabilized samples (Figure S8); Fe2O3 particle characterization (Figure S9); Chemi Doc membrane images post Fe2O3 MEBAS experiments (Figure S10); individual bio-Fe2O3 TGA curves (Figure S11); XG, CMC, and Ge bio-Fe2O3 ATR-FTIR (Figure S12); schematic showing biomineral binding models determined via the MEBAS-MBC framework (Figure S13); circular dichroism of Ge biopolymer solutions (Figure S14); qualitative analysis of LB stabilized samples strength under saturation (Figure S15); table highlighting expected "results per day" using individual MEBAS-MBC-GV techniques (Figure S16) (<a class="ext-link" href="/doi/suppl/10.1021/acs.est.0c02001/suppl_file/es0c02001_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Improvement of soil shear strength using glucomannan biopolymer for loose sand

The Optimisation Analysis of Sand-Clay Mixtures Stabilised with Xanthan Gum Biopolymers

Mechanical behavior and strengthening mechanism of loess stabilized with xanthan gum and guar gum biopolymers

Analysis of the mechanical properties and micro-reinforcement mechanisms of loose accumulated sandy soil improved with polyvinyl alcohol and sisal fiber

Strength and hygroscopic behavior of biopolymer-treated silty sand under remodeling and dry-wet cycles

Efficacy of Acacia Gum Biopolymer in Strength Improvement of Silty and Clay Soils under Varying Curing Conditions

Rock‐Like Strength Enhancement of Indian Desert Sand Using Commercially Available Polysaccharide Biopolymers

The Role of Biopolymers on the Water Retention Capacity of Stabilized Sand

The Effect of Polymer-Fiber Stabilization on the Unconfined Compressive Strength and Shear Strength of Sand

An Experimental Investigation on Use of Xanthan Gum Biopolymer as Additive for Improving the Reinforcement Effect of Biocementation on Sandy Soils

Strengthening potential of xanthan gum biopolymer in stabilizing weak subgrade soil

Use of xanthan and guar gums in soil strengthening

Experimental investigation of sandy soil stabilization using chitosan biopolymer

Effects of Biopolymers on the Liquid Limit and Undrained Shear Strength of Soft Clays

Shear behaviour of sandy silt treated with lignosulfonate

An anionic biopolymer γ-polyglutamate enhanced the microbially induced carbonate precipitation for soil improvement: mechanical behaviors and underlying mechanism

Impact of polymer mixtures on the stabilization and erosion control of silty sand slope

Biopolymer Stabilization/Solidification of Soils: A Rapid, Micro-Macro, Cross-Disciplinary Approach

Experimental Study on the Physical and Mechanical Properties of Modified Clay Using Xanthan Gum and Guar Gum Composite Materials

Cracking and erosion behaviors of sand-clay mixtures stabilized with microbial biopolymer and palm fiber

Optimization of physical and strength performance of cellulose-based fiber additives stabilized expansive soil