Abstract:A quad-polarization reconfigurable reflectarray (RA) antenna, which can work in horizontal polarization (HP), vertical polarization (VP), left-hand circular polarization (LHCP), and right-hand circular polarization (RHCP) modes with simultaneous large-angle beam-scanning capability, is designed and experimentally verified. Under the traditional view at the element level, at least 2-bit phases are required because a 90° phase shift step is needed for conversion from linear polarization (LP) to circular polarization (CP). In this work, we found that the extra phase shifts (90°/ $- 90^{\circ })$ can be achieved by changing the global reference phase of the 0/1 coding arrangement in the spatially fed architecture, while 1-bit phase resolution is used in the element level. As verification, a square patch with four slots loaded with two positive-intrinsic–negative (PIN) diodes is exploited as an RA element with 1-bit phase independent control of dual-LP. Then, the RA aperture contains 16 $\times16$ elements, where 512 PIN diodes are integrated to control each state independently by a field-programmable gate array (FPGA), excited by a linearly polarized horn is developed and fabricated. Besides, the superposition of the aperture field approach is used to optimize the CP radiation performance, especially the axial ratio (AR). The measured results of the prototype demonstrate the simultaneous multipolarization reconfigurable and the beam-steering capability, where scanning beams are up to 60° in horizontal and vertical planes. The proposed low-lost design is believed to be a promising candidate for mobile communication and cognitive radar applications.

A Quad-Polarization Reconfigurable Conformal Array of Wide Coverage Range and High Gain for Unmanned Aerial Vehicle Communications

Design of a 64-Element Dual-Polarized Planar Receive Phased Array with Four Concurrent Reconfigurable Beams for Ka-Band SATCOM

The Design of a K-Band 256-Element Reconfigurable Multi-Beam Phased-Array for SATCOM Application

Antenna for Wireless Communications on Unmanned Aerial Vehicles

Quad-Polarization Reconfigurable Reflectarray with Independent Beam-Scanning and Polarization Switching Capabilities

A quad-polarization reconfigurable transmitarray antenna with beam-scanning and reconfigurable polarization capabilities

Reconfigurable Dielectric Resonator Antenna and Array with Frequency and Polarization Flexibility

Multi-polarized Reconfigurable Antenna with Ground Plane Slot and Capacitance Feeding for UAV-to-everything Communications

A Wideband Polarization Reconfigurable Vivaldi Antenna Array on a Cylindrical Substrate

A Compact, Low-Profile, Wideband, Electrically Controlled, Tri-Polarization-Reconfigurable Antenna With Quadruple Gap-Coupled Patches

Design of Polarization-Reconfigurable Beam-Scanning Monopulse Phased Array

A Miniature Non-Uniform Conformal Antenna Array Using Fast Synthesis for Wide-Scan UAV Application

A Novel Broad Beamwidth Conformal Antenna on Unmanned Aerial Vehicle

Wideband Polarization Agile Dielectric Resonator Antenna With Reconfigurable Broadside and Conical Beams

Vertically Polarized Compact Reconfigurable 360° Azimuth Scanning Array for Aviation Applications

Wideband Multi-polarization Reconfigurable Antenna based on Non-uniform Polarization Convert AMC Reflector

A Compact Dual-band Omnidirectional Circularly Polarized Filtering Antenna for UAV Communications

A Multifunctional Array System Based on Adjustable-Phase Antenna for Wireless Communications

A Wideband High-Gain Multilinear Polarization Reconfigurable Antenna

A Low-Profile Broadband Quad-Polarization Reconfigurable Omnidirectional Antenna

Wideband 1 bit Reconfigurable Transmitarray Antenna Based on Polarization Rotation Element