Abstract:In this study, xCuO-CeO2 mixed oxide catalysts (Cu weight ratio x = 1.5, 3, 4.5, 6 and 15 wt.%) were prepared using solution combustion synthesis (SCS) and their catalytic activities towards the methane (CH4) oxidation reaction were studied. The combustion synthesis of the pure CeO2 and the CuO-CeO2 solid solution catalysts was performed using copper and/or cerium nitrate salt as an oxidizer and citric acid as a fuel. A variety of standard techniques, including scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), thermo-gravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy were employed to reveal the microstructural, crystal, thermal and electronic properties that may affect the performance of CH4 oxidation. The CuO subphase was detected in the prepared solid solution and confirmed with XRD and Raman spectroscopy, as indicated by the XRD peaks at diffraction angles of 35.3° and 38.5° and the Ag Raman mode at 289 cm−1, which are characteristics of tenorite CuO. A profound influence of Cu content was evident, not only affecting the structural and electronic properties of the catalysts, but also the performance of catalysts in the CH4 oxidation. The presence of Cu in the CeO2 lattice obviously promoted its catalytic activity for CH4 catalytic oxidation. Among the prepared catalysts, the 6% CuO-CeO2 catalyst demonstrated the highest performance, with T50 = 502 °C and T80 = 556 °C, an activity that is associated with the availability of a fine porous structure and the enhanced surface area of this catalyst. The results demonstrate that nanocrystalline copper-ceria mixed oxide catalysts could serve as an inexpensive and active material for CH4 combustion.

Ammonia and toluene oxidation: Mutual activating effect of copper and cerium on catalytic efficiency

Catalytic Combustion of VOCs on Pt/CuMnCe and Pt/CeY Honeycomb Monolithic Catalysts

Cu-Mn-Ce ternary mixed-oxide catalysts for catalytic combustion of toluene

High Thermal Stability of Ceria-Based Mixed Oxide Catalysts Supported on ZrO2 for Toluene Combustion

Insight into catalytic performance and reaction mechanism for toluene total oxidation over Cu-Ce supported catalyst

In-situ Synthesis of Monolithic Cu-Mn-Ce/cordierite Catalysts Towards VOCs Combustion

Study on Performance of Cerium Mixed into Copper Oxide Loading Catalysts in Catalytic Oxidation of Toluene

Toluene Catalytic Combustion over Copper Modified Mn0.5Ce0.5 Ox Solid Solution Sponge-Like Structures

Nanoporous CeO 2 -Decorated Cu-SmMn 2 O 5 Composite Mullite Oxide Catalyst for Toluene Oxidation

Synergistic Effect of Catalytic Action of Copper and Cerium in the Oxidation of CO on Modified Zeolites Cu/Ce/ZSM-5

Nanoporous CeO2-Decorated Cu-SmMn2O5 Composite Mullite Oxide Catalyst for Toluene Oxidation

Cobalt-doped cerium dioxide enhances interfacial synergistic catalysis for boosting the oxidation of toluene

Enhanced catalytic performance for toluene combustion via Ce-doped α-MnO2: efficient balance between toluene adsorption and activation oxidation

Catalytic oxidation of benzene over alumina-supported Cu-Mn-Ce mixed oxide catalysts

Facile fabrication of hollow structured Cu-Ce binary oxides and their catalytic properties for toluene combustion

Combustion Synthesis of Non-Precious CuO-CeO2 Nanocrystalline Catalysts with Enhanced Catalytic Activity for Methane Oxidation

Catalytic oxidative properties and characterization of CuO/CeO2 catalysts

Influence of cerium precursors on the structure and reducibility of mesoporous CuO-CeO2 catalysts for CO oxidation

Preparation of Co/Ce Bimetallic Foam-Based Catalyst for Catalytic Oxidation of Toluene

Catalytic Combustion of Toluene over Highly Dispersed Cu-CeOx Derived from Cu-Ce-MOF by EDTA Grafting Method

Cerium–Copper–Manganese Oxides Synthesized via Solution Combustion Synthesis (SCS) for Total Oxidation of VOCs