Abstract:Lithium-sulfur (Li-S) battery is a promising candidate for high-energy storage devices due to its high theoretical capacity and energy density. However, both structural change and drastic phase transfer arising from irreversible and unstable conversion between S/Li2S and polysulfides during cycling would lead rapid capacity decay and short cycle-life for lithium-sulfur battery. Herein, inspired by such principle of zippers, a self-healing zipper-like sulfur electrode was designed, which was fabricated by organo-polysulfide (-Sx-) polymer binder (PSPEG) and sulfur nanocomposite with organo-polysulfide (-Sx-) chains grafted on carbon host (CPS/S). The organo-polysulfide (-Sx-) chains on/in the carbon host or binder can not only function as redox mediator to control phase transfer between S/Li2S and polysulfides but also act as "zipper teeth" and "zipper sliders" respectively to repair the electrode spontaneously as the sulfur electrode suffered from mechanical damages and cracks. Owing to this unique zipper-like electrode design, the structural collapse and the agglomeration of S/Li2S were effectively suppressed. Consequently, the sulfur electrode exhibits both high capacity and excellent cycling stability, showing a specific capacity of 812 mA h g−1 at 1.0 C after 300 cycles. Moreover, as the sulfur loading was increased to 7.6 mg cm−2, the CPS/S+PSPEG electrode can still deliver a high areal capacity of 6.47 mA h cm−2 with a low electrolyte/sulfur ratio (4.5:1, µL:mg) after 60 cycles, which verifies the feasibility of the zipper-like electrode design.

Healable and Conductive Two-Dimensional Sulfur Iodide for High-Rate Sodium Batteries

Healing High-Loading Sulfur Electrodes With Unprecedented Long Cycling Life: Spatial Heterogeneity Control

Healable and conductive sulfur iodide for solid-state Li-S batteries

A Self‐Healing Chemistry‐Enabled Organic Cathode for Sustainable and Stable Sodium‐Ion Batteries

Inorganic/organic Composite Binder with Self-Healing Property for Silicon Anode in Lithium-Ion Battery

Self-healable, super Li-ion conductive, and flexible quasi-solid electrolyte for long-term safe lithium sulfur batteries

An Intrinsically Self‐Healing NiCo||Zn Rechargeable Battery with a Self‐Healable Ferric‐Ion‐Crosslinking Sodium Polyacrylate Hydrogel Electrolyte

Improving the Capacity and Cycling-Stability of Lithium–sulfur Batteries Using Self-Healing Binders Containing Dynamic Disulfide Bonds

A Conductive Self-Healing Hydrogel Binder for High-Performance Silicon Anodes in Lithium-Ion Batteries

A self-healing composite solid electrolyte with dynamic three-dimensional inorganic/organic hybrid network for flexible all-solid-state lithium metal batteries

A homemade self-healing material utilized as multi-functional binder for long-lifespan lithium–sulfur batteries

A Highly Damping, Crack‐Insensitive and Self‐Healable Binder for Lithium‐Sulfur Battery by Tailoring the Viscoelastic Behavior (Adv. Energy Mater. 14/2024)

Robust Self-Healing Ion-Conductive Interlocking Dual-Network Binder Based on Gradient Dynamic Bonding for Advanced SiO Anodes in Li-Ion Batteries

Self-healing Chemistry Enables the Stable Operation of Silicon Microparticle Anodes for High-Energy Lithium-Ion Batteries

A Self‐Healing Flexible Quasi‐Solid Zinc‐Ion Battery Using All‐In‐One Electrodes

A multifunctional zipper-like sulfur electrode enables the stable operation of lithium-sulfur battery through self-healing chemistry

Interfacial self-healing polymer electrolytes for long-cycle solid-state lithium-sulfur batteries

A Self-Healing Aqueous Lithium-Ion Battery

Self-Healing Silicon Anode Via the Addition of GaInSn-Encapsulated Microcapsules

Regulating Polysulfide Redox Kinetics on a Self‐Healing Electrode for High‐Performance Flexible Lithium‐Sulfur Batteries

Thermally Healable Electrolyte‐Electrode Interface for Sustainable Quasi‐Solid Zinc‐ion Batteries