Abstract:Electroactive biofilm (EAB) has garnered significant attention due to its effectiveness in pollutant remediation, electricity generation, and chemical synthesis. However, achieving precise control over the rapid formation of EAB presents challenges for the practical implementation of bioelectrochemical technology. In this study, we investigated the regulation of EAB formation by manipulating applied electric potential. We developed a modified XDLVO model for the applied electric field and quantitatively assessed the feasibility of existing rapid formation strategies for EAB. Our results revealed that electrostatic (EL) force significantly influenced EAB formation in the presence of the applied electric field, with the potential difference between the electrode and the microbial solution being the primary determinant of EL force. Compared to -0.2 V and 0 V vs.Ag/AgCl, EAB exhibited the highest electrochemical performance at 0.2 V vs.Ag/AgCl, with a maximum current density of 6.044 ± 0.10 A/m2, surpassing that at -0.2 V vs.Ag/AgCl and 0 V vs.Ag/AgCl by 1.73 times and 1.31 times, respectively. Furthermore, EAB demonstrated the highest biomass accumulation, measuring a thickness of 25 ± 2 μm at 0.2 V vs. Ag/AgCl, representing increases of 1.67 and 1.25 times compared to -0.2 V vs.Ag/AgCl and 0 V vs.Ag/AgCl, respectively. The strong electrostatic attraction under the anodic potential promoted the formation of a monolayer of biofilm. Additionally, the hydrophilicity and hydrophobicity of the biofilm were altered following inversion culture. The Lewis acid-base (AB) attraction offset the electrostatic repulsion caused by negative charges, it is beneficial for the formation of biofilms. This study, for the first time, elucidated the difference in the formation of cathode and anode biofilm from a thermodynamic perspective in the context of electric field introduction, laying the theoretical foundation for the directional regulation of the rapid formation of typical electroactive biofilms.

Understanding the Tail Current Behavior of Electroactive Biofilms Realizes the Rapid Measurement of Biochemical Oxygen Demand

An electroactive biofilm-based biosensor for water safety: Pollutants detection and early-warning

Electrochemical Regulation on the Metabolism of Anode Biofilms under Persistent Exogenous Bacteria Interference

Realizing BOD Detection of Real Wastewater by Considering the Bioelectrochemical Degradability of Organic Pollutants in a Bioelectrochemical System

In situ and self-adaptive BOD bioreaction sensing system based on environmentally domesticated microbial populations

Layered Design of a Highly Repeatable Electroactive Biofilm for a Standardized Biochemical Oxygen Demand Sensor

Preparation Of Biofilm Electrode With Xanthomonas Sp. And Carbon Nanotubes And The Application To Rapid Biochemical Oxygen Demand Analysis In High-Salt Condition

Dominating Contribution of Intracellular Electron Generation over Extracellular Electron Transfer in Signaling Toxic Formaldehyde Exposure in Electrochemically Active Biofilm Sensors

Study of BOD Microbial Sensors for Waste Water Treatment Control

An innovative reactor-type biosensor for BOD rapid measurement.

Microbial electrochemical sensor for water biotoxicity monitoring

Stimulation Effect of Electric Current Density (ECD) on Microbial Community of a Three Dimensional Particle Electrode Coupled with Biological Aerated Filter Reactor (TDE-BAF)

Dynamic membrane filtration accelerates electroactive biofilms in bioelectrochemical systems

Electroactive Biofilms of Activated Sludge Microorganisms on a Nanostructured Surface as the Basis for a Highly Sensitive Biochemical Oxygen Demand Biosensor

Mechanistic Insights into the Response of Electroactive Biofilms to Cd2+ Shock: Bacterial Viability and Electron Transfer Behavior at the Cellular and Community Levels.

Biosensors For Rapid Estimation Of Biochemical Oxygen Demand

Microfluidic Chip-Based Microbial Metabolism-Indexed BOD Sensor for Rapid Determination of Biochemical Oxygen Demand

Research Advances in Biosensor for Rapid Measurement of Biochemical Oxygen Demand (BOD)

Towards rapid formation of electroactive biofilm: insights from thermodynamics and electric field manipulation

Acclimation of electroactive biofilms under different operating conditions: comprehensive analysis from architecture, composition, and metabolic activity

A single-chamber microbial fuel cell for rapid determination of biochemical oxygen demand using low-cost activated carbon as cathode catalyst