Abstract:We characterized a mediator-type biochemical oxygen demand (BOD) sensor with a three-electrode system using potassium ferricyanide (FC) and Pseudomonas fluorescens in our previous study. In the present study, we have utilized the advantages of a mediator-type biosensor, which does not require air-supply equipment for on-site measurements, and made a fully disposable sensor tip for a portable device. The tip consists of a two-electrode system with P. fluorescens immobilized on a cellulose acetate membrane and is packaged in polyester film to prevent it from drying out. By aeration with a 0.1 M NaCl solution of P. fluorescens (after growth), the sensor responses as well as their reproducibility and stability have been successfully improved. The responses increased more than seven times, and the calibration curve from 15 to 260 mg l(-1) also remained linear although the response decreased approximately half the original after at least 35 days in storage. The reproducibility of the sensor responses improved to 12.7% (average of relative standard deviations (RSDs)) in the calibration curve obtained by using the Organization for Economic Cooperation and Development synthetic sewage. Examination of real samples from three different sources showed that the BOD as determined by the sensor correlates well with the conventional 5-day BOD method (r(2)=0.982, 0.823, and 0.809). Consequently, the aeration process makes it possible to realize rapid, and in situ measurements without the long conditioning process that is generally required to activate the microorganisms immobilized on bio-films before use. Finally, we have designed a portable device that utilizes our disposable sensor tip.

Biosensors For Rapid Estimation Of Biochemical Oxygen Demand

Research Advances in Biosensor for Rapid Measurement of Biochemical Oxygen Demand (BOD)

Microbial Biosensors for Rapid Determination of Biochemical Oxygen Demand: Approaches, Tendencies and Development Prospects

Realizing BOD Detection of Real Wastewater by Considering the Bioelectrochemical Degradability of Organic Pollutants in a Bioelectrochemical System

An innovative reactor-type biosensor for BOD rapid measurement.

In situ and self-adaptive BOD bioreaction sensing system based on environmentally domesticated microbial populations

Microfluidic Chip-Based Microbial Metabolism-Indexed BOD Sensor for Rapid Determination of Biochemical Oxygen Demand

High-throughput determination of biochemical oxygen demand (BOD) by a microplate-based biosensor

A Novel Biosensor for the Rapid Determination of Biochemical Oxygen Demand.

Development and Optimization of a Rapid BOD Detection Method Using Microbial Immobilized Particles with Polyvinyl Alcohol (PVA) and Diatomite Modifiers

The Stability of Rapid BOD Analysis by Biosensor

Development Of Portable Sensing Apparatus For Biochemical Oxygen Demand Determination Based On Fluorescent Response

The Development of the BOD Rapid Measuring Instrument Using Microbial Sensor

Improvement of a mediator-type biochemical oxygen demand sensor for on-site measurement

An optical biosensing film for biochemical oxygen demand determination in seawater with an automatic flow sampling system

Simultaneous Measurement of the BOD Concentration and Temperature Based on a Tapered Microfiber for Water Pollution Monitoring.

Switchover of electrotrophic and heterotrophic respirations enables the biomonitoring of low concentration of BOD in oxygen-rich environment

Fast and Simultaneous Detection of Dissolved BOD and Nitrite in Wastewater by Using Bioelectrode with Bidirectional Extracellular Electron Transport.

An electroactive biofilm-based biosensor for water safety: Pollutants detection and early-warning

A single-chamber microbial fuel cell for rapid determination of biochemical oxygen demand using low-cost activated carbon as cathode catalyst

A BOD Biosensor Based on a Microorganism Immobilized on an Al 2 O 3 Sol–gel Matrix