Abstract:Rechargeable aqueous zinc-ion batteries (ZIBs) have attracted significant attention due to the distinguishing characteristics of zinc metal, including its low price, abundance in earth, safety and high theoretical specific capacity of 820 mAh g(-1). Manganese dioxide (MnO2) is a promising cathode for ZIBs due to high theoretical specific capacity, high discharge voltage plateau, cost-effectiveness and nontoxicity. However, the low electronic conductivity and volumetric changes during electrochemical cycling hinder its practical utilization. Herein, we demonstrate a polyacrylic acid (PAA)-assisted assembling strategy to fabricate freestanding and flexible MnO2/carbon nanotube/PAA (MnO2/CNT/PAA) cathodes for ZIBs. PAA plays an important role in providing excellent mechanical properties to the free-standing electrode. Moreover, the presence of CNT forms an electron conductive network, and the porous structure of MnO2/CNT/PAA electrode accommodates the volumetric variations of MnO(2)during charge/discharge cycling. The as-fabricated quasi-solid-state Zn-MnO2/CNT/PAA battery delivers a high charge storage capacity of 302 mAh g(-1)at 0.3 A g(-1)and retains 82% of the initial capacity after 1000 charge/discharge cycles at 1.5 A g(-1). The calculated volumetric energy density of Zn-MnO2/CNT/PAA battery is 8.5 mW h cm(-3)(with a thickness of 0.08 cm), which is significantly higher than the reported alkali-ion batteries (1.3 mW h cm(-3)) and comparable to supercapacitors (6.8 mW h cm(-3)) and Ni-Zn batteries (7.76 mW h cm(-3)). The current work demonstrates that free-standing MnO2/CNT/PAA composite is a promising cathode for ZIBs.

Electrodeposited ε-MnO 2 on carbon fibers as an ideal cathode material for aqueous zinc-ion batteries

Polyacrylic Acid Assisted Synthesis of Free-Standing MnO2/CNTs Cathode for Zinc-ion Batteries

Carbon nanofiber-coated MnO composite as high-performance cathode material for aqueous zinc-ion batteries

Valence Engineering via In Situ Carbon Reduction on Octahedron Sites Mn3O4 for Ultra‐Long Cycle Life Aqueous Zn‐Ion Battery

Structural regulation of Mn2O3 nanofiber cathode material for advanced aqueous zinc-ion batteries

Boosting the Cycling Stability of Aqueous Zinc-Ion Batteries through Nanofibrous Coating of a Bead-like MnOx Cathode

In situ growth of δ-MnO2/C fibers as a binder-free and free-standing cathode for advanced aqueous Zn-ion batteries

A 1D–3D interconnected δ-MnO2 nanowires network as high-performance and high energy efficiency cathode material for aqueous zinc-ion batteries

Cu-intercalated MnO2 Cathode with High-Capacity for Aqueous Zinc-Ion Batteries

Multifactor induction of pseudocapacitive in manganese oxide cathode enabling high-performance aqueous zinc ion batteries

MnO2 Heterostructure on Carbon Nanotubes as Cathode Material for Aqueous Zinc-Ion Batteries

Zinc ion stabilized MnO2 nanospheres for high capacity and long lifespan aqueous zinc-ion batteries

Fabrication of a 3D structure MnO2 electrode with high MnO2 mass loading as the cathode for high-performance aqueous zinc-ion batteries

Zinc ion stabilized MnO<sub>2</sub> nanospheres for high capacity and long lifespan aqueous zinc-ion batteries

Ferroelectric-Enhanced cathode kinetics toward High-Performance aqueous Zinc-Ion batteries

Interface Engineering to Improve the Rate Performance and Stability of the Mn-Cathode Electrode for Aqueous Zinc-Ion Batteries

Mesoporous copper-doped δ-MnO2 superstructures to enable high-performance aqueous zinc-ion batteries

Few-layer δ -MnO 2 nanosheets grown on three-dimensional N-doped hierarchically porous carbon networks for long-life aqueous zinc ion batteries

Oxygen-Deficient β-MnO2@Graphene Oxide Cathode for High-Rate and Long-Life Aqueous Zinc Ion Batteries

Electrochemical characterization of hollow urchin-like MnO2 as high-performance cathode for aqueous zinc ion batteries

Bimetallic MnMoO4 Nanostructures on Carbon Fibers As Flexible Cathode for High Performance Zinc-Ion Batteries