Abstract:Deep excavation and shield tunneling processes often induce significant deformation in adjacent existing pile foundations, posing risks to the safety of superstructures. To address this issue, capsule grouting expansion technology has emerged as an efficient and economical technology to actively control pile deformation during such construction activities. This technology has been applied in some engineering projects aimed at safeguarding nearby buildings or facilities. However, theoretical research on capsule grouting expansion technology is limited and lags behind its practical engineering application. This paper proposed a simplified theoretical approach for estimating the effect of capsule grouting expansion technology on the deformation of neighboring pile foundations. Initially, virtual image technology was employed to obtain an analytical solution for the lateral displacement of soil resulting from the expansion of a cylindrical cavity with infinite height. The pile was considered as an Euler–Bernoulli beam on a Winkler foundation, allowing for the calculation of the loading response of the existing pile foundation. Utilizing the two-stage method, the theoretical analytical method of the lateral deformation of the pile shaft caused by capsule expansion was obtained. The reliability of the proposed theoretical method was verified by comparing the measured and calculated results. Further investigation into the controlling effect of the capsule grouting expansion technology on the deformation of the pile foundation was conducted through parametric analyses. These analyses encompass capsule radius, the distance between the capsule and pile foundation, the depth of the capsule, the length of the capsule, and the pile base constraints.

Restoration Capacity Prediction of Double‐Row Capsule Grouting to Control Tunnel Deformation

Numerical Modeling of Grouted Connection Damage Development under Uniaxial Loading

Analysis for Ground Deformation Induced by Undercrossed Shield Tunnels at a Small Proximity Based on Equivalent Layer Method

A Simplified Theoretical Method for Estimating the Effect of Capsule Grouting Expansion Technology on Controlling Pile Deformation

Field measurements and analysis of real-time capsule grouting to protect existing tunnel adjacent to excavation

Method of Calculating the Compensation for Rectifying the Horizontal Displacement of Existing Tunnels by Grouting

Method of Calculating the Vertical Displacement and Additional Stress of Existing Tunnels under the Influence of Grouting Rings of New Tunnels

Dynamic Deformation Control Of Retaining Structures Of A Deep Excavation

Analysis Of Soil Disturbance Caused By Dot Excavation In Soft Soil Stratum

Numerical Analysis of Grouting Reinforcement Effects on Deep Foundation Pits Adjacent to Elevated Railways

Reuse of Drilling Waste Slurry as the Grouting Material for the Real-Time Capsule Grouting Technique

Analysis of Influence of Deformation Modes of Retaining Structures on Deformation of a Side Shield Tunnel

A fractional-order damage creep model for grouting-reinforcement body under dry–wet cycle

Analytical Method for Predicting Tunnel Deformation Caused by Overlying Excavation Considering the Dewatering

Influence of grouting on rehabilitation of an over-deformed shield tunnel lining in spatially variable soil

Tunnelling-induced ground deformation subjected to the behavior of tail grouting materials

An extended discontinuous deformation analysis (DDA) for simulation of grouting reinforcement in a water-rich fractured rock tunnel

Model tests and numerical simulations of deformation repair effect for operating shield tunnels under horizontal lateral grouting

Analysis on the Crown Convergence Deformation of Surrounding Rock for Double-Shield TBM Tunnel Based on Advance Borehole Monitoring and Inversion Analysis

Theoretical analysis on horizontal rectification of tunnel near deep foundation pit by grouting

Spatial deformation prediction method of fractured rock tunnel based on quantified GSI and its application