Abstract:Layered structures comprising coral sand and gravel have been observed in hydraulic filled foundations in the coral reefs in the South China Sea, leading to anisotropy in their physical and mechanical properties. However, the effect of a layered structure on the strength and deformation of the coral soil foundation remains unclear. In this study, a series of large-scale triaxial compression tests and step-loading tests were carried out on four types of samples, i.e., clean coral sand, clean coral gravel, sand-over-gravel layered sample, and gravel-over-sand layered sample, to investigate the impact of confining pressure and the layered structure on the strength and failure modes of these soils. The results indicate that the stress–strain relationships of all samples predominantly exhibit strain hardening under drained conditions. Under identical confining pressures, the peak strength of clean coral sand is the lowest, while that of coral gravel is the highest. The peak strengths of the two layered samples fall between these extremes, with the gravel-over-sand layered sample exhibiting higher strength. All four samples have similar peak friction angles, slightly exceeding 40°. The difference in peak strength among the four types of samples is attributed to the variations in cohesion, with the cohesion of clean coral gravel being up to four times that of clean sand, and the cohesion of layered samples falling between these two. Both clean sand and clean gravel samples exhibit a bulging phenomenon in the middle, while the layered samples primarily exhibit bulging near the coral gravel layer. In the step-loading tests, the bearing capacity of the layered samples falls between those of clean coral sand and coral gravel, with the gravel-over-sand layered samples demonstrating higher strength. Moreover, the p-s curve of the gravel-over-sand layered samples obtained from the large-scale triaxial apparatus under a confining pressure of 400 kPa resembles that from the plate load tests on the same samples.

Mechanical behavior of coral gravel during triaxial test using X-ray computed tomography

Large-Scale Triaxial Test on Mechanical Behavior of Coral Sand Gravel Layered Samples

Effect of High-Stress Levels on the Shear Behavior of Geosynthetic-Reinforced Marine Coral Sands

Experimental Investigation of Damage Evolution Characteristics of Coral Reef Limestone Based on Acoustic Emission and Digital Volume Correlation Techniques

Effect of Aggregate Size on the Axial Compressive Behavior of FRP-Confined Coral Aggregate Concrete

Experimental Study on the Mechanical Strength, Deformation Behavior and Infiltration Characteristics of Coral Sand

Experimental Study On Particle Breakage Of Carbonate Gravels Under Cyclic Loadings Through Large-Scale Triaxial Tests

Effect of chemical consolidation on physico-mechanical properties of porous coral reef limestone

Mesoscopic damage evolution of coral reef limestone based on real-time CT scanning

Mechanical properties and constitutive model of coral aggregate concrete subjected to dynamic uniaxial and triaxial compression

Dynamic mechanical behavior of coral rock subjected to high strain rate loading

Micro-and macro-mechanical behavior of crushable calcareous sand in South China Sea

Experimental Study on the Impact of Water Content on the Strength Parameters of Coral Gravelly Sand

Experimental study of one-dimensional compression creep in crushed dry coral sand

Mechanical behavior and particle breakage of calcareous sand in triaxial test

Hardening Mechanism of Coral Aggregates in Cement-Based Systems

Study on the progressive fracturing in soil and rock mixture under uniaxial compression conditions by CT scanning

Effect of the particle shape on the shear mechanical behavior of coral sand

Effects of Size and Shape on the Crushing Strength of Coral Sand Particles under Diametral Compression Test

The Evolution Of The Microstructure And Mechanical Properties Of Coral Aggregate Mortar Under Uniaxial Compression Using Ultrasonic Analysis

Effects of fine content on the mechanical properties and breakage behavior of gap-graded coral sand