Abstract:Abstract Hollow-structured NiO + Ni nanofibers wrapped by graphene were designed and successfully fabricated via a simple method. First, solid NiO + Ni nanofibers were prepared by electrospinning followed by calcination. Here, a portion of the metallic Ni was retained to improve the electrochemical performance of NiO by adjusting the calcination temperature. Next, the nanofibers were thoroughly mixed with different amounts of graphene and calcinated once more to form hollow-structured NiO + Ni nanofibers with an extremely high specific surface via the reaction between graphene and NiO on the nanofiber surface and subsequent migration of NiO into the nanofibers. Results showed that the obtained hollow-structured NiO + Ni electrode demonstrates optimal electrochemical performance when the graphene content is controlled to 3 wt%. The first cycle discharge/charge specific capacity of the electrode peaked (1596/1181 mAh · g −1 ) at 100 mA · g −1 , with a coulombic efficiency of approximately 74% (60% for 0 wt% graphene, 65% for 1 wt% graphene, and 51% for 4 wt% graphene). It also presented excellent cycling stability after 100 cycles at 100 mA · g −1 on account of its high retained discharge specific capacity (251 mAh · g −1 for 0 wt% graphene, 385 mAh · g −1 for 1 wt% graphene, 741 mAh · g −1 for 3 wt% graphene, and 367 mAh · g −1 for 4 wt% graphene). Moreover, the synthesized electrode possessed outstanding rate capability owing to its large average discharge specific capacity of approximately 546 mAh · g −1 (45 mAh · g −1 for 0 wt% graphene, 256 mAh · g −1 for 1 wt% graphene, and 174 mAh · g −1 for 4 wt% graphene) from 100 mA · g −1 to 2000 mA · g −1 . The observed improvement in electrochemical performance could be attributed to the increase in active sites and decrease in charge transport distance in the hollow-structured NiO + Ni nanofibers. Excessive introduction of graphene caused a sharp loss in electrochemical performance due to the agglomeration of graphene sheets on the nanofiber surfaces.

Synthesis of hollow Co3O4 nanocrystals in situ anchored on holey graphene for high rate lithium-ion batteries

High density Co3O4 nanoparticles confined in a porous graphene nanomesh network driven by an electrochemical process: Ultra-high capacity and rate performance for lithium ion batteries

Graphene Anchored with Co(3)o(4) Nanoparticles As Anode of Lithium Ion Batteries with Enhanced Reversible Capacity and Cyclic Performance.

Co3O4 Nanocubes Homogeneously Assembled on Few-Layer Graphene for High Energy Density Lithium-Ion Batteries

Bilayered Nanoporous Graphene/molybdenum Oxide for High Rate Lithium Ion Batteries

Self-Templating Synthesis of Hollow Co3O4 Nanoparticles Embedded in N, S-Dual-Doped Reduced Graphene Oxide for Lithium Ion Batteries.

Synthesis and electrochemical performance of hollow-structured NiO + Ni nanofibers wrapped by graphene as anodes for Li-ion batteries

A Hierarchical Structure of Carbon-Coated Li3vo4 Nanoparticles Embedded in Expanded Graphite for High Performance Lithium Ion Battery

Hollow Porous CoSnOx Nanocubes Encapsulated in One-Dimensional N-Doped Carbon Nanofibers As Anode Material for High-Performance Lithium Storage

Facile Ultrasonic Synthesis of CoO Quantum Dot/Graphene Nanosheet Composites with High Lithium Storage Capacity

Facile synthesis of porous hollow Co3O4 microfibers derived-from metal-organic frameworks as an advanced anode for lithium ion batteries

Alpha-Fe2o3 Nanoparticles Anchored On Graphene With 3d Quasi-Laminated Architecture: In Situ Wet Chemistry Synthesis And Enhanced Electrochemical Performance For Lithium Ion Batteries

In situ growth of mesoporous Co3O4 nanoparticles on graphene as a high-performance anode material for lithium-ion batteries

Porous SnO2/Co3O4 nanocubes anchored onto reduced graphene oxide as a high-performance anode for lithium-ion batteries

Bi2o3 Nanoparticles Encapsulated by Three-Dimensional Porous Nitrogen-Doped Graphene for High-Rate Lithium Ion Batteries

Synthesis Of 3d Nitrogen-Doped Graphene/Fe3o4 By A Metal Ion Induced Self-Assembly Process For High-Performance Li-Ion Batteries

In-situ formation of hollow hybrids composed of cobalt sulfides embedded within porous carbon polyhedra/carbon nanotubes for high-performance lithium-ion batteries.

Hybridization of Graphene Nanosheets and Carbon-Coated Hollow Fe3O4 Nanoparticles As a High-Performance Anode Material for Lithium-Ion Batteries

A Facile Fabrication Of Fe3o4/Graphene Nanosheets For Lithium-Ion Battery

In Situ Growth of ZnO Nanodots on Carbon Hierarchical Hollow Spheres As High-Performance Electrodes for Lithium-Ion Batteries

One-pot synthesis of ultrafine ZnFe2O4 nanocrystals anchored on graphene for high-performance Li and Li-ion batteries