Abstract:The γ U-Mo alloy has been selected for the conversion of U.S. High-Performance Research Reactor (HPRR) fuel from highly enriched uranium to low enriched uranium as a part of the effort to reduce nuclear proliferation risks. Although γ U-Mo alloys have the advantage of high uranium density and good overall irradiation performance, the irradiation-induced swelling and creep in the metal remain important design parameters since they influence the mechanical and thermal integrity of the fuel. To account for these design criteria, engineering scale models need fundamental properties, such as diffusion coefficients, as input. In this study, the diffusion of related species along grain boundaries in γ U-Mo fuel is quantified considering that grain boundaries act as sinks for point defects, nucleation sites for gas bubbles, avenues for Coble creep, etc. The diffusivities of U and Mo in selected grain boundaries of γ U-Mo alloys ( γ U-7Mo, γ U-10Mo, and γ U-12Mo) are obtained utilizing molecular dynamics simulations for a temperature range of 600 K - 1200 K with an interval of 100 K. The structures analyzed include symmetric tilt, asymmetric tilt, and twist grain boundaries. The grain boundary diffusion coefficients of U and Mo in the examined γ U-Mo alloys are on the order of 10−14 to 10−11 m 2 s −1 . It is observed that the U diffusivity in the grain boundary is higher than the Mo diffusivity in all cases and that the increase in Mo content of the alloy correlates to a decrease in the grain boundary diffusion. Xe diffusion along γ U-10Mo grain boundaries is also calculated in this work, and the diffusivity of Xe in the γ U-10Mo grain boundaries is found to be 8 to 15 orders of magnitude higher than the intrinsic Xe diffusivity in γ U-10Mo depending on the temperature. The information gathered in this work can inform fuel swelling and creep models and help understand various other phenomena related to γ U-Mo fuel performance.

Cs diffusion in SiC high-energy grain boundaries

Electron-beam-induced Current Study of Grain Boundaries in Multicrystalline Si

Near-surface and Bulk Behavior of Ag in SiC

Kick-out Diffusion of Al in 4H-Sic: an Ab Initio Study

Segregation and diffusion behaviours of helium at grain boundaries in silicon carbide ceramics: first-principles calculations and experimental investigations

Ag Out-Surface Diffusion in Crystalline SiC with an Effective SiO2 Diffusion Barrier

Molecular Dynamics Study on Thermal Conductivity of Unirradiated and Irradiated Symmetrical Tilt Grain Boundary 3C-Sic

Diffusion and Thermo-Driven Migration of Silver, Palladium, and Ruthenium Nanoparticles in Cubic SiC Matrix Using Molecular Dynamics

The characterization of high quality multicrystalline silicon by the electron beam induced current method

Diffusion of Hydrogen Isotopes in 3C-Sic in HTR-PM: A First-Principles Study

Grain Boundary Effects on Defect Production and Damage Cascade Evolution in SiC/PyC Interface: A Molecular Dynamics Study

First Principles Calculations for Iodine Atom Diffusion in SiC with Point Defects

Grain Boundary Effects on Defect Production and Mechanical Properties of Irradiated Nanocrystalline Sic

Solute diffusion by self-interstitial defects and radiation-induced segregation in ferritic Fe-X (X=Cr, Cu, Mn, Ni, P, Si) dilute alloys

Site preference and diffusion behaviors of H influenced by the implanted-He in 3C-\b{eta} SiC

First-principle Studies of Radioactive Fission Productions of Cs/Sr/Ag/I Adsorption on Silicon Carbide in HTGR

Calculation of grain boundary diffusion coefficients in γ U-Mo using atomistic simulations

Simulating hindered grain boundary diffusion using the smoothed boundary method

First principles analysis of impurities in silicon carbide grain boundaries

Site Preference and Diffusion Behaviors of H Influenced by the Implanted-He in 3C-Β SiC

Release behavior of an interstitial helium atom from 3 C -SiC(100) subsurface: A first-principles study