Abstract:Prefabricated concrete structure has the advantages of faster construction, labor saving, pollution reduction, and enhanced quality. It has been more widely adopted in recent years, but the cost is usually higher at its design or pre-construction stages due to component disassembly and detailed design. Building information modeling (BIM) could improve the design efficiency and reduce design cost, hence promoting the development of prefabricated buildings. However, due to the complexity of reinforcement modeling, existing BIM authoring tools still have low operation efficiency. Even though the latest technologies can achieve rapid reinforcement modeling, it often fails to realize the adaptive adjustment of reinforcement. In the case of changes in prefabricated components, the internal reinforcement needs to be remodeled, with reduced efficiency and increased the risk of errors. Therefore, this research proposes a self-adaptive reinforcement plug-in based on Autodesk Revit for prefabricated concrete components. The research achieved fast modeling and adaptive reinforcement. Firstly, the parametric modeling of column, beam and slab components was completed by using Excel to drive family parameters. Then, by adopting the Revit Application Program Interface (API), programming language C# and programming platform Visual Studio (VS), the secondary development within Revit achieved the rapid adaptive configuration of reinforcement. At the same time, the user interface was developed based on Windows Presentation Foundation (WPF), and the Ribbon function was adopted to expand the Revit function area to realize the visual regulation of key parameters of reinforcement, such as the reinforced type, cover thickness, spacing, and reinforcement ratio, etc. Finally, the program was developed by integrating different modules and plug-ins were established. A typical prefabricated frame structure office building was used as a case study to test the self-adaptive reinforcement plug-in. The results showed that the modeling efficiency of the developed plug-in was nearly 3 times higher than that of manual modeling. After changing the section size parameters of the members, the reinforcement could successfully achieve self-adaptive adjustment, hence significantly saving the modeling steps and time. The developed self-adaptive reinforcement plug-in contributed to the fully interoperable and multi-disciplinary coordination in prefabricated building design.

Lumped record management method using BIM and dynamo for spalling maintenance

BIM-Based Pavement Management Tool for Scheduling Urban Road Maintenance

Semi-automated visualization method for visual inspection of buildings on BIM using 3D point cloud

A Cloud Model-based Knowledge Mapping Method for Historic Building Maintenance based on Building Information Modelling and Ontology

Improved visualization of infrastructure monitoring data using building information modeling

A Linked Data System Framework for Sharing Construction Defect Information using Ontologies and BIM Environments

Structural Performance Monitoring Using a Dynamic Data-Driven BIM Environment

Analysis of Railway Bridge Girder Installation and Construction Technology--Based on BIM Technology

Development of a BIM-based bridge maintenance system (BMS) for managing defect data

BIM–LCCA Integration for Road Pavement Maintenance

Existing assets maintenance management: Optimizing maintenance procedures and costs through BIM tools

Customized Approaches for Introducing Road Maintenance Management in I-BIM Environments

Sustainability-Based Lifecycle Management for Bridge Infrastructure Using 6D BIM

Management of structural monitoring data of bridges using BIM

A BIM-Based Approach for Pavement Monitoring Integrating Data from Non-Destructive Testing Methods (NDTs)

Building information modeling supported bridge structural health diagnosis and prognosis

Research on Self-adaptive Reinforcement Plug-in of Prefabricated Concrete Component Based on BIM

Leveraging Infrastructure BIM for Life-Cycle-Based Sustainable Road Pavement Management

Visualization and monitoring information management of bridge structure health and safety early warning based on BIM

Parametric modeling and structure verification of asphalt pavement based on BIM-ABAQUS