Abstract:Prefabricated concrete structure has the advantages of faster construction, labor saving, pollution reduction, and enhanced quality. It has been more widely adopted in recent years, but the cost is usually higher at its design or pre-construction stages due to component disassembly and detailed design. Building information modeling (BIM) could improve the design efficiency and reduce design cost, hence promoting the development of prefabricated buildings. However, due to the complexity of reinforcement modeling, existing BIM authoring tools still have low operation efficiency. Even though the latest technologies can achieve rapid reinforcement modeling, it often fails to realize the adaptive adjustment of reinforcement. In the case of changes in prefabricated components, the internal reinforcement needs to be remodeled, with reduced efficiency and increased the risk of errors. Therefore, this research proposes a self-adaptive reinforcement plug-in based on Autodesk Revit for prefabricated concrete components. The research achieved fast modeling and adaptive reinforcement. Firstly, the parametric modeling of column, beam and slab components was completed by using Excel to drive family parameters. Then, by adopting the Revit Application Program Interface (API), programming language C# and programming platform Visual Studio (VS), the secondary development within Revit achieved the rapid adaptive configuration of reinforcement. At the same time, the user interface was developed based on Windows Presentation Foundation (WPF), and the Ribbon function was adopted to expand the Revit function area to realize the visual regulation of key parameters of reinforcement, such as the reinforced type, cover thickness, spacing, and reinforcement ratio, etc. Finally, the program was developed by integrating different modules and plug-ins were established. A typical prefabricated frame structure office building was used as a case study to test the self-adaptive reinforcement plug-in. The results showed that the modeling efficiency of the developed plug-in was nearly 3 times higher than that of manual modeling. After changing the section size parameters of the members, the reinforcement could successfully achieve self-adaptive adjustment, hence significantly saving the modeling steps and time. The developed self-adaptive reinforcement plug-in contributed to the fully interoperable and multi-disciplinary coordination in prefabricated building design.

What problem does this paper attempt to address?

The paper primarily focuses on the development of an adaptive rebar plugin for precast concrete structures within the Building Information Modeling (BIM) environment. ### Research Background and Objectives - **Advantages of Prefabricated Buildings**: In recent years, prefabricated buildings have become a research hotspot in the construction industry due to their enhanced quality control, improved construction efficiency, reduced pollution emissions, and potential for application expansion. - **Cost Issues**: Despite the aforementioned advantages, the design phase of prefabricated buildings often incurs high costs, which is a key factor limiting their development. - **Role of BIM**: BIM can improve design efficiency and reduce costs, and thus is widely used in the design of prefabricated buildings. However, existing BIM tools are inefficient in complex rebar modeling and struggle to achieve adaptive adjustments, leading to repeated manual operations during the design process, which increases the risk of errors as well as time and labor costs. ### Main Research Content - **Development of Adaptive Rebar Plugin**: This paper proposes an adaptive rebar plugin based on Autodesk Revit to achieve rapid modeling and adaptive rebar configuration for precast concrete components. - **Parametric Modeling**: Parametric modeling of columns, beams, and slabs is accomplished by driving family parameters through Excel. - **Secondary Development Technology**: The plugin's secondary development is realized using the Revit API, C# programming language, and Visual Studio development platform, improving the efficiency and accuracy of rebar configuration. - **User Interface Development**: A user interface was developed based on Windows Presentation Foundation (WPF), and the functionality area of Revit was extended through the Ribbon feature, enabling visual adjustment of key rebar parameters such as type, cover thickness, and spacing. - **Case Study Validation**: The effectiveness of the adaptive rebar plugin was tested through a typical precast frame structure office building project. The results showed that the modeling efficiency of the plugin is nearly 3 times higher than manual modeling. When the component section size parameters change, the rebar can successfully achieve adaptive adjustment, significantly saving modeling steps and time. ### Conclusion The adaptive rebar plugin proposed in this paper helps to improve the standardization of prefabricated building design, promote coordination and cooperation among various disciplines, thereby reducing design costs and improving design efficiency.

Research on Self-adaptive Reinforcement Plug-in of Prefabricated Concrete Component Based on BIM

Intelligent Modeling of Edge Components of Prefabricated Shear Wall Structures Based on BIM

Research on detailed design methods of precast components in prefabricated buildings based on BIM technology

Design and optimization of prefabricated building system based on BIM technology

Bim-Enabled Design Collaboration for Complex Building

Analysis of Railway Bridge Girder Installation and Construction Technology--Based on BIM Technology

Parametric Design and Application of Assembled Steel Plate Composite Beam Bridge Based on BIM Technology

Modeling and Calculation of Shear Capacity of Prestressed High Strength Concrete Beams with Web Reinforcement Based on BIM

Cost optimization in the construction of prefabricated buildings by using BIM and finite element simulation

Endowing BIM Model with Mechanical Properties -- Finite Element Simulation Analysis of Long-Span Corrugated Steel Web Continuous Beam Bridge

Building Information Modeling-Based Integration of MEP Layout Designs and Constructability

Research on Design Optimization of Prefabricated Residential Houses Based on BIM Technology

BIM-enabled collaborative-robots 3D concrete printing to construct MiC with reinforcement

Research on Prefabricated Structure Design Method Based on BIM Technology

An Automatic Scheduling Approach: Building Information Modeling-Based On- site Scheduling for Panelized Construction

BIM-based automated design of drainage systems for panelized residential buildings

Research on the Application of Feature Modeling of Prefabricated Building Components Based on BIM

Ways to Improve the Efficiency of Construction Engineering Management Based on BIM Technology

A 3D Parameterized BIM-Modeling Method for Complex Engineering Structures in Building Construction Projects

Research on smart manufacturing technology of reinforcing bars for bridge precast concrete structure