Abstract:Nutshells are regarded as cost-effective and abundant raw materials for producing activated carbons (ACs) for CO2 capture, storage, and utilization. The effects of carbonization temperature and thermochemical KOH activation conditions on the porous structure as a BET surface, micropore volume, micropore width, and pore size distribution of ACs prepared from walnut (WNS) and hazelnut (HNS) shells were investigated. As a result, one-step carbonization at 900/800 °C and thermochemical KOH activation with a char/KOH mass ratio of 1:2/1:3 were found to be optimal for preparing ACs from WNS/HNS: WNS-AC-3 and HNS-AC-2, respectively. The textural properties of the WNS/HNS chars and ACs were characterized by low-temperature nitrogen vapor adsorption, XRD, and SEM methods. Dubinin’s theory of volume filling of micropores was used to evaluate the microporosity parameters and to calculate the CO2 adsorption equilibrium over the sub- and supercritical temperatures from 216.4 to 393 K at a pressure up to 10 MPa. The CO2 capture capacities of WNS- and HNS-derived adsorbents reached 5.9/4.1 and 5.4/3.9 mmol/g at 273/293 K under 0.1 MPa pressure, respectively. A discrepancy between the total and delivery volumetric adsorption capacities of the adsorbents was attributed to the strong binding of CO2 molecules with the adsorption sites, which were mainly narrow micropores with a high adsorption potential. The high initial differential heats of CO2 adsorption onto ACs of ~32 kJ/mol confirmed this proposal. The behaviors of thermodynamic functions (enthalpy and entropy) of the adsorption systems were attributed to changes in the state of adsorbed CO2 molecules determined by a balance between attractive and repulsive CO2–CO2 and CO2–AC interactions during the adsorption process. Thus, the chosen route for preparing ACs from the nutshells made it possible to prepare efficient carbon adsorbents with a relatively high CO2 adsorption performance due to a substantial volume of micropores with a size in the range of 0.6–0.7 nm.

The chemical process of producing activated carbon using walnut shells and plastic wastes

Catalytic Pyrolysis of Waste Plastics over Industrial Organic Solid-Waste-Derived Activated Carbon: Impacts of Activation Agents

Biomass waste from walnut shell for pollutants removal and energy storage: a review on waste to wealth transformation

Optimized preparation of multi-matrix activated carbon for CO 2 capture by response surface methodology: The advantages of co-pyrolysis of biomass and plastics

Activation of waste paper: Influence of varied chemical agents on product properties

Production of Highly Efficient Activated Carbons for Wastewater Treatment from Post‐Consumer PET Plastic Bottle Waste

Preparation of Activated Carbon from Co-Pyrolysis Activation of Fly Ash and Biomass

Catalytic pyrolysis of plastic waste using metal-incorporated activated carbons for monomer recovery and carbon nanotube synthesis

Valorization of Plastics and Paper Mill Sludge into Carbon Composite and Its Catalytic Performance for Acarbon Material Consisted of the Multi-Layerzo Dye Oxidation.

Household mixed plastic waste derived adsorbents for CO 2 capture: A feasibility study

The effects of pore structures and functional groups on the catalytic performance of activated carbon catalysts for the co-pyrolysis of biomass and plastic into aromatics and hydrogen-rich syngas

Experimental Study and Thermodynamic Analysis of Carbon Dioxide Adsorption onto Activated Carbons Prepared from Biowaste Raw Materials

Production and Characterization of High Quality Activated Carbon from Oily Sludge

Conversion of char from pyrolysis of plastic wastes into alternative activated carbons for heavy metal removal

Sustainable production of porous carbon from biomass: Influence of pre-carbonization on pore evolution and environment impact

&Amp;lt;i&gt;microwave-Assisted Carbonization of Phosphoric Acid Activated Biomass&lt;/i&gt;

Tunable Production of Jet-Fuel Range Alkanes and Aromatics by Catalytic Pyrolysis of LDPE over Biomass-Derived Activated Carbons

Activated carbon production from plum pit shells for oily wastewater treatment

Activated Carbons from Co-Mingled Liquid

Catalytic pyrolysis and in situ carbonization of walnut shells: poly-generation and enhanced electrochemical performance of carbons

Product Selection Toward High-Value Hydrogen and Bamboo-Shaped Carbon Nanotubes from Plastic Waste by Catalytic Microwave Processing