Influence of Ageing Treatment on Microstructure and Mechanical Properties of GH4169 Alloy Prepared Using Wire Arc Additive Manufacturing

Xuewen You,Xinli Song,Wei Geng,Zhishen Li

DOI: https://doi.org/10.3390/met14101111

IF: 2.695

2024-09-29

Metals

Abstract:The effects of solid-solution and ageing treatments on the microstructure and mechanical properties of a GH4169 alloy made by wire arc additive manufacturing, micro-casting, and forging were researched. The microstructure, along with the size and type of precipitated phase, were analysed using an optical microscope, scanning electron microscope, and transmission electron microscope. The strength and toughness were tested using a tensile testing machine. The results show that a polygonal austenite microstructure was obtained for the GH4169 alloy prepared through wire arc additive manufacturing, micro-casting, and forging, followed by solid-solution and double-ageing treatments at different times. There were a few twins in the austenite matrix. A large number of nano-sized γ′′- and γ′-precipitated phases and a small number of Laves phases and MX phases were found in the matrix. The tensile strength and yield strength of the GH4169 alloy increased first and then decreased with the ageing time. After ageing for 16 h, the maximum yield strength was 1287 ± 22 MPa, the maximum tensile strength was 1447 ± 19 MPa, and the elongation was about 19.5%. The main strength mechanism is precipitated phase strength and solid-solution strength. The fracture exhibited obvious ductile fracture characteristics.

materials science, multidisciplinary,metallurgy & metallurgical engineering