Abstract:It is vital to explore sustainable and highly efficient catalysts for the oxygen reduction reaction (ORR) with increasing energy demand. Herein, a cobalt (Co) atom dispersed on an N-doped carbon nanosphere catalyst (denoted as ) was designed and constructed by a simple precursor-engineering method. The regulation of heteroatoms and Co metal atoms in precursors introduces more defects and thus reduces the degree of graphitization in the catalyst. The high N content of 5.23 at% in the catalyst provides abundant N sites to anchor metallic Co atoms, which further increases the defects for enhanced catalytic activity. The obtained with an ultralow loading of Co (only 0.041 wt %) exhibits an onset potential of 1.05 V, a limited-diffusion current density of 4.74 mA/cm<sup>2</sup>, and a half-wave potential of 0.79 V for the ORR under alkaline conditions, comparable to those of commercial Pt/C (1.06 V, 4.58 mA/cm<sup>2</sup>, and 0.81 V, respectively). Therefore, the synergistic effect of heteroatoms and Co metal atoms is beneficial for tuning the carbon matrix defects, which leads to the improvement of ORR activity. The Koutecky–Levich equation and rotating ring-disk electrode tests reveal a complete four-electron oxygen reduction pathway, impeding hydrogen peroxide generation. Moreover, nearly 93.8% of the current is retained for after 10 h stability testing without any morphological structural collapse. Meanwhile, it demonstrates superior tolerance to methanol. Our discovery opens a door to engineering the defects of carbon catalysts through introducing ultralow loading of non-noble metal atoms on substrates.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.0c03197?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.0c03197</a>.**Polarization curves of catalysts for temperature regulation; TEM and HAADF-STEM graphs; TGA curves of catalysts; XRD and Raman analysis of ECo-900; XPS C1s spectra of catalysts; additional cyclic voltammogram and LSV data; stability testing data; methanol resistance testing data; K–L plots and electron number; cycling performance of Zn-air equipped battery data; and element analysis results (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.0c03197/suppl_file/ae0c03197_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Carbothermal Redox Reaction in Constructing Defective Carbon as Superior Oxygen Reduction Catalysts

Zn-induced Defect Engineering to Activate Bimetallic NiCo Alloy@nitrogen-Doped Graphene Hybrid Nanomaterials for Enhanced Oxygen Reduction Reaction

Defective Carbon Derived Using a Dissolution-Recrystallization Strategy for Oxygen Reduction Electrocatalysis

Topological Defect-Containing Fe/N Co-Doped Mesoporous Carbon Nanosheets As Novel Electrocatalysts for the Oxygen Reduction Reaction and Zn-air Batteries

Defective ZnS nanoparticles anchored in situ on N-doped carbon as a superior oxygen reduction reaction catalyst

Potent Charge‐Trapping for Boosted Electrocatalytic Oxygen Reduction

Ultra-dense carbon defects as highly active sites for oxygen reduction catalysis

Heteroatom sulfur-induced defect engineering in carbon nanotubes: Enhanced electrocatalytic activity of oxygen reduction reaction

Creating Defects in the Active Site of Fe‐N‐C Catalyst Promotes Catalytic Performance for Oxygen Reduction Reaction

Defective N/S-Codoped 3D Cheese-Like Porous Carbon Nanomaterial toward Efficient Oxygen Reduction and Zn-Air Batteries

Facile synthesis of defect-rich Fe-N-C hybrid from fullerene/ferrotetraphenylporphyrin as efficient oxygen reduction electrocatalyst for Zn-air battery

Enhancing Defects of N-Doped Carbon Nanospheres Via Ultralow Co Atom Loading Engineering for a High-Efficiency Oxygen Reduction Reaction

Defects and Conductive Nitrogen-Carbon Framework Regulated ZnInOx Nanosheets for Boosting CO2 Electrocatalytic Reduction

Defect-rich and metal-free N, S co-doped 3D interconnected mesoporous carbon material as an advanced electrocatalyst towards oxygen reduction reaction

Graphitic Carbocatalysts with Pentagon Defects Synthesized from Polyperylene for Electrocatalytic Oxygen Reduction and Flexible Zinc-Air Batteries

New Nitrogen-Doped Graphitic Carbon Nanosheets with Rich Structural Defects and Hierarchical Nanopores As Efficient Metal-Free Electrocatalysts for Oxygen Reduction Reaction in Zn-Air Batteries

The vital balance of graphitization and defect engineering for efficient bifunctional oxygen electrocatalyst based on N‐doping carbon/CNTs frameworks

Tuning Carbon Defect in Copper Single‐Atom Catalysts for Efficient Oxygen Reduction

Large-scale defect-rich iron/nitrogen co-doped graphene-based materials as the excellent bifunctional electrocatalyst for liquid and flexible all-solid-state zinc-air batteries

Large-Scale Atomic Strain Defects on Palladium Surfaces for Enhanced Oxygen Reduction and Zinc-Air Batteries

Boosting Defective Carbon by Anchoring Well-Defined Atomically Dispersed Metal-N4 Sites for ORR, OER, and Zn-air Batteries