Abstract:In the field of four-dimensional (4D) printing deformation, shape memory deformation can be achieved by changing printing parameters or materials. However, the effect of different thickness ratios between heterogeneous layers of the bilayer structure on deformation in 4D printing is still an unknown factor. A method for programming the fiber arrangement direction and the thickness ratio of the polylactic acid (PLA) layer and thermoplastic polyurethane (TPU) layer was proposed to achieve temperature-driven controllable deformation of the heterogeneous laminated bilayer structure. Three-dimensional (3D) printing method based on fused deposition modeling (FDM) technology was used to print homogeneous laminated structures, material distribution structures, and heterogeneous laminated bilayer structures, respectively. The thermal strain of homogeneous laminated structures with different fiber arrangement direction of PLA and TPU materials was analyzed. The effect of four printed material distribution structures on bending angle and bending response time of temperature-driven deformation in 4D printing was analyzed. The deformation performance of heterogeneous laminated bilayer structures with different thickness ratios between PLA layer and TPU layer were studied through a combination of theoretical analysis and experimental verification. The experimental results show that the bending curvature of the bilayer structure with the thickness ratio of 7:5 (PLA: TPU) is the maximum that is 1.11 cm −1 . Four cross-shaped components were designed to demonstrate the programmability of heterogeneous laminated bilayer structure in 4D printing, and the controllable deformation of the programmable bilayer structure was verified through the printed rosette structure. Therefore, programming the fiber arrangement direction and the thickness ratio of the heterogeneous bilayer structure is an effective strategy for achieving temperature-driven controllable deformation in 4D printing.

Polymer/LMPA for manufacturing deformable structure by coaxial printing

4D Printing of a Digital Shape Memory Polymer with Tunable High Performance

Modular 4D Printing Via Interfacial Welding of Digital Light-Controllable Dynamic Covalent Polymer Networks

Printable Multi-Stage Variable Stiffness Material Enabled by Low Melting Point Particles Additives

Temperature-driven controllable deformation in 4D printing through programmable heterogeneous laminated bilayer structure

Shape Memory Polymer-based Stiffness Variable Soft Actuator Via Digital Light Processing-based 3D Printing.

Experimental and Numerical Investigation of Polymer-Based 3D-Printed Lattice Structures with Largely Tunable Mechanical Properties Based on Triply Periodic Minimal Surface

4D Printed Stiffness‐Tunable Actuator for Load‐Bearing Soft Machines

Variable Stiffness Conductive Composites by 4D Printing Dual Materials Alternately

Tunable deformation behavior of 4D printed shape memory polymers with embedded pre-stretched elastomers

Four-Dimensionally Printed Continuous Carbon Fiber-Reinforced Shape Memory Polymer Composites with Diverse Deformation Based on an Inhomogeneous Temperature Field

Multi-parameter-encoded 4D printing of liquid crystal elastomers for programmable shape morphing behaviors

Deformation Process of 3D Printed Structures Made from Flexible Material with Different Values of Relative Density

4D printing composite with electrically controlled local deformation

A Novel Method of Fabricating Designable Polylactic Acid (pla)/thermoplastic Polyurethane (TPU) Composite Filaments and Structures by Material Extrusion Additive Manufacturing

3D Printing of Flexible Mechanical Metamaterials: Synergistic Design of Process and Geometric Parameters

Co-extrusion 4D printing of shape memory polymers with continuous metallic fibers for selective deformation

A Method to Fabricate Complex Structure for Variable Stiffness Manipulators Based on Low-Melting-Point Alloy

Programming the deformation of a temperature-driven bilayer structure in 4D printing

Programmable spatial deformation by controllable off-center freestanding 4D printing of continuous fiber reinforced liquid crystal elastomer composites

Three-dimensional liquid crystal polymer actuators assembled by athermal photo-welding