Abstract:For parts of machines and equipment operating under the influence of aggressive media, abrasive, high temperatures, the creation of a hard, wear-resistant surface is an urgent task. Cobalt is used as a binder to create hard alloy materials that work under these conditions. It was of interest to evaluate the possibility of using cobalt as an additive in complex thermal diffusion chromium plating of structural steel. The article describes the features of thermal diffusion saturation of steel X35CrNi2-3 with chromium and cobalt at a temperature of 1000°C. A technique for analyzing the obtained coating is presented, based on the possibilities of X-ray spectral microanalysis of the diffusion layer on transverse microsections of the obtained samples. The elemental composition of the diffusion layer was monitored using the JEOL JSM-6460 LV universal scanning (scanning) electron microscope. The microstructure was studied using the optical metallographic microscope Axio Observer D1.m. The X-ray phase analysis was carried out with the Rigaku Ultima IV diffractometer. The hardness measurement was carried out with the FM-800 microhardness tester at a load of 50 g. Data were obtained on the distribution of chromium and cobalt in the surface layer of steel. It is shown that the resulting thermal diffusion coating consists mainly of a substitutional solid solution based on Cr‒Fe‒Co with bcc lattice and chromium carbides. The average diffusion coefficients of chromium in the α-phase of chromium were determined to be DCr = 3,22·10‒15 м2/с; in the γ-phase of iron DCr = 9,41·10‒15 м2/с. The diffusion coefficient of cobalt in the γ-phase of iron DCo = 7,89·10‒15 м2/с. The depth of the outer coating on the sample was about 15–20 μm, the depth of the diffusion layer of chromium in the base metal was about 70 μm, and that of cobalt was about 40 μm. The maximum hardness of the outer surface layer was 1740 HV, the diffusion layer in the base metal was 900–560 HV, and the base metal was about 510 HV.

Acceleration of Solid-Phase Chromizing of Steel by Intrinsic Thermionic Field

Influence of the composition of the cumulative lattice during thermal diffusion chromiing on the depth of the diffusion layer

Influence of the Composition of Saturating Mixture on the Depth of Diffusion of Chromium and the Coating Structure During Chromovanadizing

Accelerated grain boundary migration in nanolaminated interstitial-free steel during chromizing

THE CHROMIUM AND COBALT DISTRIBUTION IN THE DIFFUSION LAYER OF STEEL X35CrNi2-3 DURING THERMОDIFFUSION SATURATION

The Effect of Temperature on the Chromizing Process for Ferritic-Martensitic Steel

Study of Fe Diffusion in Cr2O3 by Secondary Ion Mass Spectrometry

[Diffusion chromizing of medical equipment parts made of carbon steels]

Electromigration-enhanced atomic diffusion to improve coating interface bonding

Study on Diffusion Kinetics and Law of Chromium on the Surface of Low-Carbon Steel

Phase transformations in low-temperature chromized 0.45 wt.% C plain carbon steel

Effect of the Cooling Rate on Phase Transformations in a Surface-Alloyed Layer of Steel

Diffusion Kinetics of Chromium in a Novel Super304H Stainless Steel

Study on Complex Chromizing at 550℃ for H13 Steel

Computational Thermodynamics/kinetics Aided Design for the Microstructure of Pearlitic Steels During Cooling Process

Controlling plasma-based surface modifications of an austenitic alloy by thermochemical and athermal diffusions

Characterization of High-current Pulsed Electron Beam Interaction with AISI 1045 Steel and the Microstructure Evolution

Thermal Processes in the Heating of Powder Compacts of Metals and Their Compositions II. Thermokinetics of Processes in the Heating of Porous Iron

Formation of hard surface layer on austenitic stainless steels via simultaneous chromising and nitriding by pack cementation process

Complex Deformation–Ion-Plasma Treatment of Steel 08Kh18N10T-Sh

Reactive molecular dynamics simulations of the initial oxidation and passivation of Fe-Cr alloy steel