Abstract:Machining Inconel 718, a high-strength superalloy with applications in critical industries, presents unique challenges. Conventional cutting fluid application has long been employed for machining Inconel 718 with cemented carbide tools. While it effectively provides cooling and lubrication, it raises significant sustainability concerns. It contributes substantially to production costs, poses environmental toxicity risks, and impacts workplace safety and environmental well-being. Researchers have explored alternative cooling strategies to mitigate these issues, including minimum quantity lubrication, cryogenic fluids, and minimum quantity cooled lubrication. However, even these less enviromental harmful machining cooling techniques have some fluid dispersion into the atmosphere, creating some sustainable impact. Thus, an ideal cooling system should adopt a closed-loop system to prevent fluid dispersion, ensuring eco-friendliness while offering efficient lubri-cooling for chip formation. This study introduces and evaluates the performance of an internally cooled tool system, utilizing cemented carbide square inserts with internal galleries for continuous water circulation within a closed loop. These new tools were rigorously tested in turning Inconel 718 superalloy and benchmarked against conventional cutting fluids and dry machining. The experimental factors encompassed these three different cutting atmospheres and tool coatings (TiNAl or AlCrN over TiNAl - AlCrN+). The key performance metrics assessed included cutting forces, workpiece surface roughness, and tool life. The primary conclusion revealed that the internally cooled tools outperformed cutting fluids when employing the TiNAl coating, exhibiting a material removal rate 27% higher than cutting fluids and an impressive 262% gain over dry machining. AlCrN+ with cutting fluids demonstrated the most exceptional performance, yielding a material removal rate 46% superior to internally cooled tools and an astonishing 306% increase compared to dry machining. The influence of TiNAl on increasing cutting forces was consistent with expectations, primarily due to its higher coefficient of friction relative to AlCrN+. The other input variables exhibited no statistically significant differences under the tested conditions. In sum, internally cooled tools emerge as an innovative and environmentally sustainable solution for machining Inconel 718. They offer outstanding heat removal capabilities and substantial advantages over cutting fluids while significantly surpassing the performance of dry machining, thereby addressing crucial concerns in sustainable machining practices.

Investigation of sustainability and performance of Ag-coated CuO cutting fluid in grinding of Inconel 738

Influence of water-based copper nanofluid on wheel loading and surface roughness during grinding of Inconel 738 superalloy

Performance evaluation of nanofluid-based minimum quantity lubrication grinding of Ni-Cr alloy under the influence of CuO nanoparticles

Evaluation of Surface Roughness, Tool Wear and Chip Morphology during Machining of Nickel-Based Alloy under Sustainable Hybrid Nanofluid-MQL Strategy

Investigation on Grindability Improvement of Inconel 625 using Multi-walled Carbon Nanotubes Nanofluids-Assisted Minimum Quantity Lubrication Surface Grinding

Nanoparticle-enhanced coolants in machining: mechanism, application, and prospects

Towards green manufacturing: investigating tool coatings and cooling strategies for Inconel 718 turning

Experimental investigations on surface integrity and chip morphology in hard tuning of AISI D3 steel under sustainable nanofluid-based minimum quantity lubrication

Multiple Performance Characteristics in the Application of Taguchi Fuzzy Method in Nanofluid/Ultrasonic Atomization Minimum Quantity Lubrication for Grinding Inconel 718 Alloys

Investigation of a green nanofluid added with graphene and Al 2 O 3 nano-additives for grinding hard-to-cut materials

Experimental Investigation on the Compatibility of Nanoparticles with Vegetable Oils for Nanofluid Minimum Quantity Lubrication Machining

Grindability Evaluation of Ultrasonic Assisted Grinding of Silicon Nitride Ceramic Using Minimum Quantity Lubrication Based SiO2 Nanofluid

Study on High-Speed Machining of 2219 Aluminum Utilizing Nanoparticle-Enhanced Minimum Quantity Lubrication (MQL) Technique

Machining performance of Inconel 718 in dry, air-cooling and bio-oil based minimum quantity lubrication environments

A Study on the Effects of Hybridized Metal Oxide and Carbonaceous Nano-Cutting Fluids in the End Milling of AA6082 Aluminum Alloy

Experimental investigation to study the effect of synthesized and characterized monotype and hybrid nanofluids in minimum quantity lubrication assisted turning of bearing steel

Probing the tribology and drilling performance of high performance cutting fluid on Inconel 690 superalloy by minimum quantity lubrication technology

Enhancing high-speed CNC milling performance of Ti6Al4V alloy through the application of ZnO-Ag hybrid nanofluids

Effects of SiO2-Al2O3-ZrO2 Tri-hybrid Nanofluids on Surface Roughness and Cutting Temperature in End Milling Process of Aluminum Alloy 6061-T6 Using Uncoated and Coated Cutting Inserts with Minimal Quantity Lubricant Method

Experimental investigation of drilling on Inconel 718 using eco-friendly nanofluid