Abstract:Background: Biodiesel is a green fuel consisting of long chain fatty acid monoalkyl esters, which can be blended with diesel or used alone which is usually produced from vegetable oils/fats by either lipasecatalyzed transesterification. In this investigation, an enzyme (Novozym 435) catalyzed process was optimized to prepare methyl esters from crude Citrullus colocynthis oil (CCO) by transesterification of CCO with methanol. However, as per our knowledge, lipase-catalyzed transesterification have not been used for biodiesel production from Citrullus colocynthis. Objective: The purpose of this work was to transesterify the CCO in the presence of Candida antarctica lipase as catalyst and methanol. Additionally, the physicochemical parameters/fuel properties of the Citrullus colocynthis methyl ester (CCME) were assessed and compared. Methods: Lipase-catalyzed reactions were carried out in three necked flask (50 mL) attached with reflux condenser and thermometer, immersed in oil bath at constant stirring speed (400 rpm). The reaction mixture was consisted of CCO and varying the calculated amount of methanol, tert-butyl alcohol, and Novozym 435. The experimental parameters reaction time, methanol/oil molar ratio, reaction temperature, tert-butanol content, Novozym 435 content and water content were optimized for the transesterification reaction. The CCME yield was measured using gas chromatograph. The fuel properties of the produced CCME were determined as per American Society for Testing and Materials (ASTM) and European (EN) biodiesel standard methods. Results: In this study, an enzymatic catalyst was employed to synthesize the CCME from CCO via transesterification. Several variables affecting the CCME yield were optimized as lipase quantity (4%), water content (0.5%), methanol/oil molar ratio (5:1), reaction temperature (43 °C), reaction medium composition (80% tertbutanol/ oil), and reaction time (3.7 h). A CCME yield of 97.8% was achieved using enzyme catalyzed transesterification of CCO under optimal conditions. The significant biodiesel fuel properties of CCME, i.e. cloud point (0.70 °C); cetane number (49.07); kinematic viscosity (2.27 mm2/s); flash point (143 °C); sulfur content (2 ppm) density (880 kg/m3) and acid value (0.076 mg KOH/g) were appraised. CCME also exhibited long-term storage stability (4.80 h) and all the biodiesel fuel properties were within the range of standards (ASTM D6751 and EN 14214). Conclusion: The lipase-catalyzed transesterification produced better conversion than the base-catalyzed reaction. The fuel properties of CCME were within the limits of the ASTM D6751 and EN14214 standards. Furthermore, CCME showed good oxidative stability and a long shelf life due its high natural antioxidant content. CCME showed better fuel properties and long-term storage stability due to which it can be used as a potential alternative fuel.

Optimization and clean synthesis of biodiesel from Rumex crispus leaves using calcium oxide derived from mango seed shell as a nanocatalyst

Amalgamation and Optimization of FAEE Biodiesel Fuel from Croton macrostachyus hochst. ex Delile Seed oil Utilizing Solid Calcium Oxide-Chicken Eggshell Squander as a Heterogeneous Catalyst

Modeling and optimization of transesterification of Jatropha oil to fatty acid methyl ester: application of response surface methodology (CCD) and Taguchi orthogonal method

Biodiesel production from rubber seed oil using calcium oxide derived from eggshell as catalyst – optimization and modeling studies

Production and Optimization of Biodiesel in a Membrane Reactor, Using a Solid Base Catalyst

Production of Biodiesel from Mixed Castor Seed and Microalgae Oils: Optimization of the Production and Fuel Quality Assessment

Optimized biodiesel production from mixed non-edible oils using advanced computational techniques and a novel bifunctional liquified catalyst: Compatibility assessment in IC engines

ESolvent-free, enzyme-catalyzed biodiesel production from mango, neem, and shea oils via response surface methodology

Optimized Biodiesel Production from Waste Cooking Oil (WCO) using Calcium Oxide (CaO) Nano-catalyst

Efficient application of newly synthesized green Bi2O3 nanoparticles for sustainable biodiesel production via membrane reactor

Preparation of Biodiesel Catalyzed by Solid Super Base of Calcium Oxide and Its Refining Process

Utilization of waste seed oil from Cestrum nocturnum as a novel source for cleaner production of biodiesel using green nano-catalyst of antimony oxide

Metal-Organic Framework-Derived Solid Catalyst for Biodiesel Production from Jatropha curcas Oil: Kinetic Study and Process Optimization Using Response Surface Methodology

Sustainable production of biodiesel from waste cooking oil using magnesium oxide nano catalyst: An optimization study

Synthesis and characterization of barium doped CaO heterogeneous nanocatalyst for the production of biodiesel from Catharanthus roseus seeds: Kinetics, optimization and performance evaluation

Enhanced transesterification reaction using chromium-doped calcium oxide-based catalyst supported on alumina and its specification of biodiesel

Synthesis of Fatty Acid Methyl Ester from Croton macrostachyus (Bisana) Kernel Oil: Parameter Optimization, Engine Performance, and Emission Characteristics for Croton macrostachyus Kernel Oil Fatty Acid Methyl Ester Blend with Mineral Diesel Fuel

Microwave-assisted biodiesel production using ZIF-8 MOF-derived nanocatalyst: A process optimization, kinetics, thermodynamics and life cycle cost analysis

Biodiesel Production from Citrillus colocynthis Oil Using Enzymatic Based Catalytic Reaction and Characterization Studies

Sulfamic acid modified UiO-66 metal-organic framework for biodiesel production: Process optimization using response surface methodology, kinetics, and thermodynamic study

Production of high quality biodiesel from novel non-edible Raphnus raphanistrum L. seed oil using copper modified montmorillonite clay catalyst