Abstract:<section class="article-section__content"><p>The Extensive Damage Mitigation Guideline (EDMG), which was developed by the U.S. Nuclear Energy Institute (NEI) owing to the motivation of 911 terrorist attacks and not allowed to spread before the Fukushima nuclear accident, was publicly available after Fukushima nuclear accident and paid attention to worldwide. Many countries have adopted the U.S. EDMG methodology and developed their strategies (some are not called EDMG but have similar functions), planning to introduce it into the emergency plans of their domestic nuclear power plants (NPPs). Based on the defense‐in‐depth (DID) concept of nuclear safety, the experience of the Fukushima nuclear accident, and the state‐of‐the‐art of EDMGs research, this paper will give a comprehensive review of EDMG. To illustrate the reason for the introduction of EDMG into the traditional NPP procedures/guidelines, the review work started from the perspective of DID in nuclear safety and the reason for the Fukushima nuclear accident from the viewpoint of DID, which showed the weaknesses of DID implementation strategy ‐ underestimation of the damage during a beyond‐design‐basis external event (BDBEE). EDMG is crucial complementary for the old framework of procedures/guidelines to enhance the concept of DID. The research progress of EDMG in different countries has been reviewed and a rough comparison has been made among them according to the present state‐of‐the‐art from literature. The methodology of EDMG is summarized as follows: (a) Loss of Large Area (LOLA) ‐ the originally designed scenario for EDMG; (b) elements of EDMG ‐ the summarized contents for EDMG implementation; (c) classification of EDMG ‐ initial response EDMGs and Technical Support Center (TSC) response EDMGs; (d) implementation of EDMG‐introduction of three phases of EDMG implementation step by step. Furthermore, three typical methods to integrate EDMG into the traditional procedures/guidelines are reviewed. Finally, this paper gives some concluding remarks for EDMG‐related critical issues and recommended future work, which may be challenges for the development and application of EDMG and useful for the related researchers.</p></section><section class="article-section__content"><h3 class="article-section__sub-title section1"> Novelty Statement</h3><ul class="unordered-list"><li>The studies of the extensive damage mitigation guideline (EDMG), its methodology, and the progress in different countries have been reviewed.</li><li>Three typical methods to integrate EDMG into the traditional procedures/guidelines are summarized and reviewed.</li><li>Concluding remarks for EDMG‐related critical issues and recommended future work are summarized.</li></ul></section>

Safety for the Non-Electrical Worker: Special-Purpose GFCIs are a Step Closer in Prevention Through Design

Electrical Safety in Industrial Construction: An Analysis of 10 Years of Incidents in the Global Engineering, Procurement, and Construction Industry

Design of a residual current circuit breaker IC with anti-interference technique

Power system grounding. II. RCD and GFCI

Design and Analysis of an Area-Efficient High Holding Voltage ESD Protection Device

Short Circuit and Arc Flash Study on a Microgrid Facility

Unprotected Faults of Electrical and Extension Cords in AC and DC Systems

Detection of Single-Phase to Ground Faults in Low-Resistance Grounded MV Systems

A Functional Safety Assessment Methodology for Explosion Protection with Application to a Variable Frequency Drive System

The National Electrical Safety Code, powerline clearances, and wildfires

Arc-Flash Energy Reduction Techniques: Zone-Selective Interlocking and Energy-Reducing Maintenance Switching

Testing the operation of protection devices against parallel arc breakdown and spark gaps in the event of a ground fault

Study on High Impedance Grounding Fault Protection for Personal Safety Guard in Distribution Grid

Ground Fault in Medium-Voltage Power Networks with an Isolated Neutral Point: Spectral and Wavelet Analysis of Selected Cases in an Example Industrial Network Modeled in the ATP-EMTP Package

New safety strategies for nuclear power plants: A review

Continued Investigation of Arc Flash in Single-Phase Systems: Threshold for Possible Hazards

A Pedagogical Proposal: Some Fundamentals and Concepts for Fire Protection System Design

Lightning, Grounding and Protection for Control Systems

Early intervention mechanism for preventing electrocution in construction engineering

Electrocution Risk of Capacitive Discharge Shocks: Application to Electric Vehicle Charging

An adaptive protection scheme for multiple single-phase grounding faults in radial distribution networks with inverter-interfaced distributed generators