Abstract:Interest on the electrocaloric effect grew rapidly over the past decade. In this time, the electrocaloric temperature change was directly and indirectly determined in a lot of ferroelectric materials. To compare those materials with respect to electrocaloric applications not solely the electrocaloric but also the thermophysical performance characteristics need to be considered. Here, a material related cooling power is derived on basis of a Newtonian cooling model of a thin plate, which includes electrocaloric as well as thermophysical properties. From the material related cooling power a caloric figure of merit is derived which is used to compare materials of the Ba(ZrxTi1-x)O3 system. The electrocaloric temperature change, specific heat capacity and thermal conductivity of Ba(ZrxTi1-x)O3 are provided. The depicted compositions have different paraelectric to ferroelectric phase transition behavior, ranging from first order to second order character, diffusive phase transition and relaxor-like behavior. The largest caloric figure of merit is found for Ba(Zr0.13Ti0.87)O3 with a second order paraelectric to ferroelectric phase transition. The caloric figure of merit is further used to compare the electrocaloric effect with the magnetocaloric and mechanocaloric effect. It is found that multilayer structures of the best lead containing electrocaloric materials can compete with representative materials of the magnetocaloric effect. Whereas, NiTi, a representative of the mechanocaloric effect, exhibits a five times larger performance than the best magnetocaloric or electrocaloric materials. Phenomenological calculations are used to elaborate on the effect of critical end points, tricritical point and triple point on the electrocaloric behavior. The electric field – temperature phase diagram of BT is provided. The contribution of the latent heat, at the electric field induced first order phase transition, to the electrocaloric temperature change is subtracted and by this it is demonstrated that the largest electrocaloric responsivity is at the liquid – vapor type of critical end point. The phase diagram and electrocaloric temperature changes for Ba(ZrxTi1-x)O3 are calculated. A complete composition – temperature phase diagram with the position of a tricritical point and of a triple point are calculated. By considering the line of critical end points, an electric field – composition – temperature phase diagram is constructed. It is demonstrated that the triple point has a positive effect in the enhancement of the electrocaloric properties, whereas the tricritical point has no effect. The long term stability of the electrocaloric temperature change and the effect of oxygen vacancy migration is demonstrated. The movement of oxygen vacancies under strong electric fields, leads to a change in the defect chemistry and hence, to increased leakage current and Joule heating. It is demonstrated that the main conduction mechanism after 106 electrocaloric cycles changes from ionic to electronic conductivity. By changing the polarity of the electric field after every 105 cycles the oxygen vacancies can be redistributed and a large cycle number of 106 without decreasing ECE is obtained.

Evolution behavior of electrocaloric effect in BaTiO3‐based ceramics with different phase structure and phase transition

Effect of Phase Transition on Electrocaloric Effect in Indium Substituted BaTiO3 Ceramics

Structure evolution and electric-field-induced reversible transition in perovskite Na(Nb<sub>1-</sub><i><sub>x</sub></i>Ta<i><sub>x</sub></i>)O<sub>3</sub> ceramics

Large electrocaloric effect over a wide temperature range in BaTiO3-modified lead-free ceramics

Tuning the electrocaloric effect by tailoring phase fraction in BaTiO3-based ferroelectrics

Phase–composition and Temperature Dependence of Electrocaloric Effect in Lead–free Bi0.5Na0.5TiO3–BaTiO3–(Sr0.7Bi0.2□0.1)TiO3 Ceramics

Direct and Indirect Measurement of Electrocaloric Effect in Lead-Free (100-X)ba(hf0.2ti0.8)o3-x(ba0.7ca0.3)tio3 Ceramics Near Multi-Phase Boundary

Tuning the Electrocaloric Effect in 0.94Bi0.5na0.5tio3-0.06Batio3 Ceramics by Relaxor Phase Blending

Type–I Pseudo–first–order Phase Transition Induced Electrocaloric Effect in Lead–free Bi0.5Na0.5TiO3–0.06BaTiO3 Ceramics

Phase transition and electrical properties of Ba 0.7 Ca 0.3 TiO 3- BiFeO 3 ceramics

Giant Electrocaloric Effect In Lead-Free Ba0.94ca0.06ti1-Xsnxo3 Ceramics With Tunable Curie Temperature

Large Room-Temperature Electrocaloric Response Achieved by Tailoring the First-Order Orthorhombic-Tetragonal Phase Transition in BaTiO3-based Ferroelectric Ceramics

Electrocaloric effect in relaxor ferroelectric Ba(Ti1-xYx)O3-x/2 ceramics over a broad temperature range

Electrocaloric Effect of (Ba1-Sr )(hf Ti1-)O3 Lead-Free Ferroelectric Ceramics with Phase Structure Regulation

Large Electrocaloric Strength And Broad Electrocaloric Temperature Span In Lead-Free Ba(0.85)Ca(0.15)Ti(1-X)Hf(X)O(3)Ceramics

Stabilization of the first-order phase transition character and enhancement of the electrocaloric effect by Na0.5Bi0.5TiO3 substitution in BaTiO3 ceramics

Unusually Soft Ferroelectricity in (ba1−xsrx)tio3 Ceramics

Large Room-Temperature Electrocaloric Effect in Lead-Free BaHf Ti O3 Ceramics under Low Electric Field

Electrocaloric Cooling Power and Long Term Stability of Barium Zirconate Titanate

Achieving Excellent Electrocaloric Properties Near Room Temperature in Ba0.75sr0.25tio3 Based Pb-Free Ceramics by Phase Modification

Electrocaloric Materials: Giant Electrocaloric Response over A Broad Temperature Range in Modified BaTiO3 Ceramics (adv. Funct. Mater. 9/2014)