Abstract:The emergence and spread of microfluidics over the last decades relied almost exclusively on the elastomer polydimethylsiloxane (PDMS). The main reason for the success of PDMS in the field of microfluidic research is its suitability for rapid prototyping and simple bonding methods. PDMS allows for precise microstructuring by replica molding and bonding to different substrates through various established strategies. However, large-scale production and commercialization efforts are hindered by the low scalability of PDMS-based chip fabrication and high material costs. Furthermore, fundamental limitations of PDMS, such as small molecule absorption and high water evaporation, have resulted in a shift toward PDMS-free systems. Thermoplastic elastomers (TPE) are a promising alternative, combining properties from both thermoplastic materials and elastomers. Here, we present a rapid and scalable fabrication method for microfluidic systems based on a polycarbonate (PC) and TPE hybrid material. Microstructured PC/TPE-hybrid modules are generated by hot embossing precise features into the TPE while simultaneously fusing the flexible TPE to a rigid thermoplastic layer through thermal fusion bonding. Compared to TPE alone, the resulting, more rigid composite material improves device handling while maintaining the key advantages of TPE. In a fast and simple process, the PC/TPE-hybrid can be bonded to several types of thermoplastics as well as glass substrates. The resulting bond strength withstands at least 7.5 bar of applied pressure, even after seven days of exposure to a high-temperature and humid environment, which makes the PC/TPE-hybrid suitable for most microfluidic applications. Furthermore, we demonstrate that the PC/TPE-hybrid features low absorption of small molecules while being biocompatible, making it a suitable material for microfluidic biotechnological applications.

Thermally-Conductive-Pin Patterned Substrate: Innovative Strategy for Controlled Formation of Tubular Pores in Biodegradable Polymer Membranes

Bioinspired Large-Scale Aligned Porous Materials Assembled with Dual Temperature Gradients

PVDF porous matrix with controlled microstructure prepared by TIPS process as polymer electrolyte for lithium ion battery

A Novel Asymmetric Amphiphilic Porous Film of (Pla)-(Pla-b-peg)-(peg) with Controlled Gradual Pore Size

Patterning Flat-Sheet Poly(vinylidene Fluoride) Membrane Using Templated Thermally Induced Phase Separation

Effects of Co-Diluent on the Pore Structure, Patterning Fidelity, and Properties of Membranes Fabricated by Lithographically Templated Thermally Induced Phase Separation

Tailoring pore structures in poly(propylene-co-1-butene) membranes: Unlocking versatility for advanced applications

Porous polymeric structures for tissue engineering prepared by a coagulation, compression moulding and salt leaching technique

Integration of an ultra-strong poly(lactic-co-glycolic acid) (PLGA) knitted mesh into a thermally induced phase separation (TIPS) PLGA porous structure to yield a thin biphasic scaffold suitable for dermal tissue engineering

Recent Progress on Biodegradable Tissue Engineering Scaffolds Prepared by Thermally-Induced Phase Separation (TIPS)

A “room-temperature” injection molding/particulate leaching approach for fabrication of biodegradable three-dimensional porous scaffolds

Facile Patterning of Thermoplastic Elastomers and Robust Bonding to Glass and Thermoplastics for Microfluidic Cell Culture and Organ-on-Chip

Morphology-Controlled Mesopores with Hydrophilic Pore Walls from Triblock Copolymers

A versatile route for the fabrication of micro-patterned polylactic-acid (PLA)-based membranes with tailored morphology via breath figure imprinting

4D printing of biocompatible, hierarchically porous shape memory polymeric structures

Spatially Controlled Permeability and Stiffness in Photopatterned Two-Stage Reactive Polymer Films for Enhanced CO2 Barrier and Mechanical Toughness

Construction of porous poly (l-lactic acid) surface via carbon quantum dots-assisted static Breath-Figures method

Fabrication of "spongy Skin" on Diversified Materials Based on Surface Swelling Non-Solvent-Induced Phase Separation.

Specially Elaborated Thermally Induced Phase Separation to Fabricate Poly(L-Lactic Acid) Scaffolds with Ultra Large Pores and Good Interconnectivity

Controllable Preparation of Microscale Tubes with Multiphase Co-Laminar Flow in a Double Co-Axial Microdevice

Development of Polymer Microporous Membranes Via Thermally Induced Phase Separation