Abstract:The practical application of lithium-sulfur (Li-S) batteries is limited by the easy dissolution of polysulfides in the electrolyte, resulting in the lithium polysulfide (LPS) shuttle effect. Several two-dimensional (2D) materials with abundant active binding sites and high surface-to-volume ratios have been developed to prepare functional separators that suppress the diffusion of polysulfides. However, the influence of modified layer thickness on Li+ transport has not been considered. Herein, we synthesized individual and multilayered 2D Ti3C2Tx MXene nanosheets and used them to fabricate a series of Ti3C2Tx-PP modified separators. The separators had mass loadings ranging from 0.16 to 0.016 mg cm(-2), which is the lowest value reported for 2D materials to the best of our knowledge. The corresponding reductions in thickness ranged from 1.2 mu m to 100 nm. LPS shuttling was effectively suppressed, even at the lowest mass loading of 0.016 mg cm(-2). Suppression was due to the strong interaction between LPS intermediates and Ti atoms and hydroxyl functional groups on the separator surface. The lithium-ion diffusion coefficient increased with the reduction of Ti3C2Tx layers on the separator. Superior cycling stability and rate performance were attained when the separator with a Ti3C2Tx-PP mass loading of 0.016 mg cm(-2) was incorporated into a Li-S battery. Carbon nanotubes (CNTs) were introduced into the separators to further improve the electrical and Li+ ionic conductivity in the cross-plane direction of the 2D Ti3C2Tx layers. With the ultra-lightweight Ti3C2Tx/CNTs modified PP separator, the cell maintained a capacity of 640 mAh g(-1) after 200 cycles at 1 C with a capacity decay of only 0.079% per cycle. (C) 2019 Science Press and Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by Elsevier B.V. and Science Press. All rights reserved.

Realizing dual regulation of polysulfides and lithium ions by a versatile separator

Effective Dual Polysulfide Rejection by a Tannic Acid/Fe-III Complex-Coated Separator in Lithium-Sulfur Batteries

Multifunctional Lithium Phytate/Carbon Nanotube Double-Layer-Modified Separators for High-Performance Lithium-Sulfur Batteries

Suppression Of Polysulfide Shuttling With A Separator Modified Using Spontaneously Polarized Bismuth Ferrite For High Performance Lithium-Sulfur Batteries

Tg-C 3 N 4 -coated functional separator as polysulfide barrier of high-performance lithium-sulfur batteries

Separator modified by a caterpillar-like composite with interconnected N-doped carbon nanotubes decorated Co-MnO heterointerface enabling robust polysulfide adsorption and catalytic conversion for Li-S batteries

TiO2@Porous carbon nanotubes modified separator as polysulfide barrier for lithium-sulfur batteries

Enhancing Lithium-Sulfur Battery Performance through Electronic/Ionic Co-Conductive MWCNTs/LLTO Separator Modification

Synergistic inhibitory effect of ultralight CNTs-COOH@Fe3O4 modified separator on polysulfides shuttling for high-performance lithium–sulfur batteries

Mesoporous Boron Carbon Nitride/graphene Modified Separators As Efficient Polysulfides Barrier for Highly Stable Lithium-Sulfur Batteries

Fabrication of electrospun bilayer separators for lithium-sulfur batteries: A surface and structure dual modification strategy

Hierarchically porous carbon nanofibers loaded with Cu 2 O and Cu nanoparticles modified separator with strong adsorption and excellent catalysis of lithium polysulfide for lithium-sulfur batteries

Designing of multifunctional and flame retardant separator towards safer high-performance lithium-sulfur batteries

Application of Sn-MOF-derived SnO2 and SnO2/CNTs composites in separator modification for lithium-sulfur batteries

Separator engineering toward suppressed shuttle effect and homogenized lithium deposition in lithium−sulfur batteries

All-in-one Janus separator for lithium–sulfur batteries with lithium polysulfide and dendrite growth suppressed at temperature gradient effect

Ultra-lightweight Ti3C2T MXene Modified Separator for Li–S Batteries: Thickness Regulation Enabled Polysulfide Inhibition and Lithium Ion Transportation

Interfacial "Double-Terminal Binding Sites" Catalysts Synergistically Boosting the Electrocatalytic Li2S Redox for Durable Lithium-Sulfur Batteries

Modified separators boost polysulfides adsorption-catalysis in lithium-sulfur batteries from Ni@Co hetero-nanocrystals into CNT-porous carbon dual frameworks

A thin multifunctional coating on a separator improves the cyclability and safety of lithium sulfur batteries.

Ni@N-doped graphene nanosheets and CNTs hybrids modified separator as efficient polysulfide barrier for high-performance lithium sulfur batteries