Abstract:It is seen that with the reduction in land areas owing to the floating-rings featured grooves, there is reduction in the load capacities and bearing torques of the oil-films, which have an influence on the nonlinear oscillations of turbocharger rotors. In the present paper, the impact of the reduced load capacities and bearing torques caused by circumferential or/and axial grooves in full-floating-ring bearings on the nonlinear oscillations of turbocharger rotors is investigated. The numerical solution of the Reynolds equation for full-floating-ring bearings with grooves by means of a finite difference or finite element approach imposes a prohibitive simulation times, sine in every time-integration step a direct discretization of the Reynolds equation has to be solved simultaneously with the rotor model. To be able to perform transient simulations, a computationally efficient full-floating-ring bearing model is mandatory. To surmount this problem, a very time-efficient but rather precise method is proposed. The major point of the proposed method is the manipulation of the Reynolds equation to allow a speed parameter varying within (−1, +1) to reflect the relative weights of the journal and floating ring’s rotation and squeezing effects. Given the diameter-to-length ratio of each fluid film, groove widths, and boundary conditions, the fluid force databases can be easily established by the finite difference method. During the transient response analysis, the required fluid forces and bearing torques from each film can be evaluated by interpolation using the existent forces and torques of the closest points in the databases. Using transient simulations with the proposed method, the effect of circumferential or/and axial grooves in full-floating-ring bearings on the amplitudes and frequencies of the nonlinear oscillations of turbocharger rotors is qualitatively investigated. It is shown that the reduction of the load capacities and bearing torques due to grooves exert a large influence on the nonlinear rotor oscillations.

A review on recent advancements in an automotive turbocharger rotor system supported on the ball bearings, oil film and oil-free bearings

Dynamic and stability comparison analysis of the high-speed turbocharger rotor system with and without thrust bearing via machine learning schemes

Review of Nonlinear Rotor-Bearing Dynamics System

Numerical and Experimental Investigation on Thermohydrodynamic Performance of Turbocharger Rotor-Bearing System

Turbocharger rotor vibration reduction methodology with an active control scheme

Coupling nonlinear dynamics and multi-objective optimization for periodic response and reduced power loss in turbochargers with floating ring bearings

Dynamic Analysis of Turbocharger Rotor Bearing with an Integrated Three Dimensional Thermohydrodynamic Model

Feasibility Study of a Turbocharger Rotor Supported by Air Foil Bearings with Diameter of 17 Mm Focusing on Rotordynamic Performance

Effects of Circumferential and Axial Grooves on the Nonlinear Oscillations of the Full Floating Ring Bearing Supported Turbocharger Rotor

Effect of rotating unbalance and engine excitations on the nonlinear dynamic response of turbocharger flexible rotor system supported on floating ring bearings

Dynamics and stability analysis of unbalance responses in mid‐positioned electrically assisted turbocharger rotor

Dynamic stability analysis of a high-speed diesel engine turbocharger subjected to aerodynamic loads and engine-induced vibration

Active Vibration Control in Turbocharger Rotor System with the Use of Electromagnetic Actuator

Improving Vibration Response of Radial Turbine in Variable Geometry Turbochargers With CFD Analysis

Rotor vibration control studies with electrorheological fluid lubricant in floating ring bearings

Dynamic Analysis of High Speed Turbine Rotor with Foil Bearing

Analysis of Nonlinear Phenomena in High Speed Ball Bearings due to Radial Clearance and Unbalanced Rotor Effects

Recent Progress In Unsteady And Pulsatile Flow Performance Analysis Of Turbocharger Turbines

An optimal parameter identification approach in foil bearing supported high-speed turbocharger rotor system

Dynamic analysis of a high-speed micro compressor supported by spiral-grooved hydrodynamic air bearing

Parametric design of turbocharger rotor system under exhaust emission loads via surrogate model