Abstract:To eliminate the shortcomings in the grouting sleeve and other connection forms in precast concrete shear wall structure induced by the poor grouting, difficult quality assurance, low construction efficiency, and high cost, a new type of monolithic assembled concrete shear wall structure with non-connected vertical distributed reinforcement was proposed in this paper. The new shear wall structure is composed of middle precast wall panels and cast-in-place boundary members. The vertical distributed reinforcement in the middle precast wall panels is not connected between the upper and lower floors. This technique was based on the normal section bearing capacity of equal strength and inclined section bearing capacity of equal strength compared with the cast-in-place shear wall structure. Three full-scale models of precast shear walls and one cast-in-place contrast specimen were tested for their seismic performance under pseudo-static loading. All precast specimens are cast based on the manufacture specification of the factory. By analysis of test results, including the failure modes, load-lateral drift hysteresis curves, bearing capacity, hysteretic characteristics, deformation components, ductility, rigidity degeneration, energy dissipation, and strain distribution, all the specimens were obtained and compared. Comparisons between test results indicate that the proposed shear walls have a similar bearing capacity as that of the cast-in-place shear wall and improved energy dissipation and ductility. Moreover, the specimen with inclined reinforcement performs better in drift capacity compared to companion specimens. The contribution of flexural deformation to the total displacement of each specimen is the largest, follow by the contribution of shear deformation, and the contribution of slip is the smallest. The strain of non-connected vertical distributed reinforcement of the precast panel did not yield during the loading process. The cross-section of the precast shear wall panel conforms to the assumption of plane cross-section according to the strain distribution before the reinforcement yields.

Seismic performance of precast concrete shear wall using grouted sleeve connections for section steels reinforced at wall ends

Seismic performance of precast concrete walls with grouted sleeve connections using large-diameter bars

Seismic performance of new precast concrete shear wall under high axial compression ratio

Seismic Performance of Precast Concrete Superposed Shear Walls with CFST End Columns Subjected to Cyclic Loading

Study on Seismic Performance of Precast Shear Wall Structure Connected by Sleeve and Threaded Rod Connectors

Experimental Study on Seismic Behavior of Precast Concrete Sandwich Shear Walls under High Axial Compression Ratio

Seismic performance of innovative prefabricated reinforced recycled concrete shear walls

Seismic performance of precast shear wall with sleeves connection based on experimental and numerical studies

Seismic performance of precast concrete shear walls with spiral stirrup restrained grout-anchored lapped reinforcement connection

Seismic performance of a new type of precast shear walls with non-connected vertical distributed reinforcement

Seismic performance of precast short-leg shear wall using a grouting sleeve connection

Cyclic Loading Experiments on Seismic Performance of Precast Concrete Superposed Shear Walls with CFST End Columns

Experimental Research on Seismic Performance of Precast Concrete Shear Walls with a Novel Grouted Sleeve Used in the Connection

Seismic Performance of Precast Concrete Double Skin Shear Walls with Different Vertical Connection Types

Seismic Performance of Precast Shear Walls Prestressed Via Post-Tensioned High Strength Bars Placed Inside Grouted Corrugated Pipes

EXPERIMENTAL STUDY ON SEISMIC PERFORMANCE OF FULL PRECAST SHEAR WALL-FRAME STRUCTURES WITH REINFORCEMENT SPLICED BY GROUT-FILLED SLEEVES

Seismic performance of a novel partly precast RC shear wall with double precast edge members and a central T-shape CIP member

Experimental Evaluation on the Seismic Behavior of Precast Concrete Shear Walls with Slip-Friction Devices

Reversed cyclic loading tests on precast concrete sandwich shear walls under different axial compression ratios

Experimental study on seismic performance of T‐shaped partly precast reinforced concrete shear wall with grouting sleeves

Experimental investigation of seismic performance of precast concrete shear walls with overlapping U-bar loop connections