Abstract:This study developed an innovative and cost-effective electrochemical membrane filtration system, which utilized electrocoagulation (EC) with electrically conductive membranes (ECMs) as cathode and membrane stripping (MS) for simultaneous ammonia recovery and contaminant removal. The novel system takes advantages of the two complementary processes (EC and MS) when sequentially performed. Electrocoagulation produced positively charged coagulants which removed contaminants. ECMs served as cathode of EC in-situ generated OH–, which converted NH4+ ions to volatile NH3. MS recovered NH3 and prevented from membrane fouling or wetting due to the protection of ECMs. The mechanism involves electrocoagulation, electrolysis and electrostatic interaction. Operating conditions (e.g., current density, electrolyte concentration and pollutants concentration) have significant impacts on process performance. Increasing the current density from 0 to 40 A/m2 exerted a positive effect on humic acid (HA) removal, ECM fouling mitigation and ammonia recovery. However, excessive current density (60 A/m2) shortened the contact time between NH4+ and OH–, and thus decreased ammonia recovery. High electrolyte concentration enhanced ammonia recovery, which can be attributed to increased pH and longer contact time between NH4+ and OH–. On the contrary, low electrolyte concentration was beneficial for ECM fouling mitigation through enhancing electrostatic repulsion between membrane electrode and HA contaminants. The improvement of HA concentration not only aggravated ECM fouling, but also had adverse effect on ammonia recovery. NH4Cl concentration had negligible effect on HA removal and membrane fouling, but the generation of OH– became a rate-limiting factor for ammonia recovery at high NH4Cl concentration. Our results demonstrated that the novel system exhibited a competitive performance with other alternatives, with HA removal efficiency of 99.2% and ammonia recovery efficiency of 68.6% at a current density of 40 A/m2, electrolyte concentration of 100 mmol/L, HA concentration of 30 mg/L and NH4Cl concentration of 300 mg/L, which can be considered as an appealing technology for ammonia resource recovery.

A Novel Multilayer Fiber Mesh Electrode for Ammonia Nitrogen Removal from Wastewater

Mechanism and Performance of Ammonia Removal with Novel Micro Electrolysis Filler in Wastewater

Development of a Novel Membrane-less Microbial Fuel Cell (ML-MFC) with a Sandwiched Nitrifying Chamber for Efficient Wastewater Treatment

Deep Purification of Low-Strength Ammonium-Containing Wastewater with ANRE Process

Nickel-Based Membrane Electrodes Enable High-Rate Electrochemical Ammonia Recovery.

A Novel Membrane-Free Electrochemical Reactor Using Nicop/Cf As an Electron Reservoir for Efficient Hydrogen Recovery in Ammonia Wastewater Treatment

Nitrogen Removal from Sludge Dewatering Effluent Through Anaerobic Ammonia Oxidation Process.

Removal of ammonia nitrogen from wastewater by three-dimensional electrode system based on solid waste containing iron

Electrochemical Degradation of Ammonia Nitrogen in Mariculture Wastewater Using an Activated Carbon Fiber Composite Anode

Process Optimization of Electrochemical Oxidation of Ammonia to Nitrogen for Actual Dyeing Wastewater Treatment

Removal of Ammonia Nitrogen from Wastewater Using an Aerobic Cathode Microbial Fuel Cell.

A novel electrochemical reactor for nitrogen and phosphorus recovery from domestic wastewater

Application of Pd-Sn modified Ru-Ir electrode for treating high chlorine ammonia-nitrogen wastewater

Optimization of a Hierarchical Porous-Structured Reactor to Mitigate Mass Transport Limitations for Efficient Electrocatalytic Ammonia Oxidation through a Three-Electron-Transfer Pathway

A novel electrocoagulation-membrane stripping hybrid system for simultaneous ammonia recovery and contaminant removal

Study on Ammonia-Nitrogen Removal in Wastewater Using Electrochemical Method

Efficient Removal of Ammonia Nitrogen by an Electrochemical Process for Spent Caustic Wastewater Treatment

Efficient ammonia-nitrogen removal and recovery from wastewater via the continuous flat-sheet gas-permeable membranes reactor pretreatment

Efficient Nitrogen Removal using a Continuous-Flow Reactor with Double-Layer Alternating Aeration for Treating Municipal Wastewater

Electro-enhanced chlorine-mediated ammonium nitrogen removal triggered by an optimized catalytic anode for sustainable saline wastewater treatment

Three-Dimensional Electrochemical Oxidation System with RuO2-IrO2/Ti as the Anode for Ammonia Wastewater Treatment