Abstract:Purpose – The purpose of this paper is to reduce the torque ripple but not to decrease the average torque of synchronous reluctance machines by using one step or more than two axially laminated rotors with asymmetric flux-barrier. Design/methodology/approach – A 24-slot four-pole synchronous reluctance machine with overlapping windings and asymmetric flux-barrier in the rotor is, first, described and designed by finite element (FE) method for maximizing average torque. The dimensions of asymmetric flux-barrier including the pole span angle and flux-barrier angle will be optimized to minimize the torque ripple and its influence on the average torque is also investigated by FE analysis. The impact of current angle on the average torque and torque ripple are also analysed. The step laminations together with the asymmetric flux-barrier are employed for further torque ripple reduction which can consider the both rotation directions. Findings – The torque ripple of synchronous reluctance machine can be significantly reduced by employing asymmetric flux-barrier but the average torque is not reduced. Research limitations/implications – The purely sinusoidal currents are applied in this analysis and the effects of harmonics in the current on torque ripple are not considered in this application. The 24-slot/four-pole synchronous reluctance machine with single-layer flux-barrier has been employed in this analysis, but this work can be continued to investigate the synchronous reluctance machine with multilayer flux-barrier. This asymmetric flux-barrier can be easily applied to permanent magnet (PM)-assisted synchronous reluctance machine and the interior PM machine with flux-barrier in the rotor, since the space which is used for PM insertion is the same as the SynRM machines. Originality/value – This paper has analysed the torque ripple and average torque of synchronous reluctance machines with asymmetric flux-barrier and step laminations with asymmetric flux-barrier. The torque ripple can be reduced by this flux-barrier arrangement. The difference of this technique with the other techniques such as stator/rotor skew is that the average torque can be improved.

Thrust Ripple Suppression Based on Negative Current Control for Short-Primary Low-Speed Large LIM Under Transient Operation

Negative Sequence Current Suppression of Dual Three-Phase Permanent Magnet Synchronous Machines Considering Inductance Asymmetry

A Deadbeat Direct Thrust Control for Permanent Magnet Linear Synchronous Machine Considering Parameter Asymmetry

A thrust ripple suppression method for long-primary double-sided linear induction motors based on harmonic current injection

A Novel Negative-Sequence Current Injection Method for Reducing LVPMM Electromagnetic Thrust Ripple Considering Static Longitudinal End Effect

Thrust Ripple Optimization and Experiment for a Permanent Magnet Linear Synchronous Motor

Novel Virtual Winding Current Controller for Suppression of Linear Permanent Magnet Machine Electromagnetic Thrust Ripple

Control Strategies of Thrust Ripple Suppression for Electromagnetic Microgravity Facility

Thrust Ripple Suppression Strategy for Precision Machining Platform by Using Predicted Current Sliding Control

Adaptive Torque Ripple Suppression Methods of Three-Phase PMSM During Single-Phase Open-Circuit Fault-Tolerant Operation

Analysis of Thrust Ripple Harmonics on Different Electric Loadings in Pm Linear Synchronous Machines with Skewed Pms

Thrust Ripple Suppression Analysis of Moving-Magnet-Type Linear Synchronous Motor Based on Independent Coil

Symmetrical Components Observer for LPMM Back EMF Based on Negative-Sequence Current Injection

THRUST RIPPLE OPTIMIZATION AND EXPERIMENT FOR PMLSM

Modified Modeling and Internal Model Control Method of Thrust Ripples in PMLSMs for Ultraprecision Air-Bearing Linear Feed Systems

Torque Ripple Reduction of Synchronous Reluctance Machines: Using Asymmetric Flux-Barrier

Analysis of Thrust Ripple of Permanent Magnet Linear Synchronous Motor with Skewed Pms

Thrust Ripple Suppression of Long Primary Double Sided Linear Induction Motor with Wedge Secondary

Force Ripple Suppression for Permanent Magnet Linear Synchronous Motor

Suppressing the Thrust Ripple of the Consequent-Pole Permanent Magnet Linear Synchronous Motor by Two-Step Design

Thrust Ripple of a Permanent Magnet LSM with Step Skewed Magnets