Abstract:The rate-determining step of the photoelectrochemical (PEC) water splitting is the water oxidation reaction at the photoanode, which is 4 orders of magnitude slower than the water reduction reaction at the photocathode. In a conventional process to accelerate the water oxidation, oxygen evolution cocatalysts (OECs) are usually used on the surface of a photoanode. As an alternative strategy, we considered employing a composite photoanode made up of a semiconductor and carbon spheres, for it is expected that the photogenerated electrons on the semiconductor particles can be captured by the carbon spheres as electron reservoirs and leave the photogenerated holes on the surface of the semiconductor particles, which promotes the effective separation of photogenerated electrons and holes. More importantly, the holes accumulated in the valence band accelerate the water oxidation reaction rate with the rapid release of electrons stored on the carbon sphere. Therefore, the composite photoanode achieves a higher photocurrent at a lower applied bias. We provide a proof of concept for this strategy by preparing a composite photoanode by combining bismuth vanadium oxide BiVO4 with carbon spheres and find that the resulting photoanode displays a remarkable enhancement in the rate of the photoanode water oxidation.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acscatal.0c03671?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acscatal.0c03671</a>.TEM image of CSs and SEM image of a special C-BVO sample; top-view SEM images of BVO and C-BVO photoanodes; HRTEM image of the as-prepared C-BVO photoanode; Tauc plots of BVO and C-BVO based on the diffuse reflectance spectra; DRS of BVO containing different amounts of CSs and zoomed-in view of the absorption spectra; cyclic voltammograms of the BVO and C-BVO photoanodes under dark and light and the charge–discharge curve of the C-BVO photoanode under dark and light; surface potential mapping of the BVO and C-BVO photoanodes; cyclic voltammograms and calculated specific capacitances of 0.25C-BVO, 0.5C-BVO, C-BVO, and 2C-BVO photoanodes; J vs V curves measured for the BVO, C-BVO, and CoPi-BVO photoanodes and for BVO photoanodes containing different amounts of CSs; J vs V diagrams of three additional BVO and C-BVO photoanodes; comparison of the AM 1.5G sunlight spectrum and UV–vis absorption spectra of the BVO and C-BVO photoanode; close-ups of the stability tests of BVO and C-BVO photoanodes; transient open circuit voltage vs time plots of BVO and C-BVO photoanodes measured at light and dark; measured H2/O2 evolution of C-BVO and BVO photoanodes; J vs V plots of BVO and C-BVO photoanodes measured in KPi and KPi + NaVO3 solution and tested at 0.9 V vs RHE in KPi and KPi + NaVO3 solution; comparison of the J vs V plots of BVO photoanodes compounded with carbon quantum dots and carbon spheres; model diagrams of the specific mechanism of charge and discharge of the C-BVO photoanode and a possible mechanism on the enhancement of the PEC water oxidation of the C-BVO photoanode; and separation and injection efficiencies of BVO and CQD-modified BVO photoanodes (<a class="ext-link" href="/doi/suppl/10.1021/acscatal.0c03671/suppl_file/cs0c03671_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Enhancing BiVO4 photoanode performance by insertion of an epitaxial BiFeO3 ferroelectric layer

Dual Modification of BiVO4 Photoanode by Enriching Bulk and Surface Oxygen Vacancies for Enhanced Photoelectrochemical Performance.

High-performance BiVO4 photoanodes cocatalyzed with bilayer metal–organic frameworks for photoelectrochemical application

Ferroelectric Polarization-Induced Performance Enhancements in BiFeO3-Based Photoanodes for Photoelectrochemical Water Splitting

Boosting Piezo-Photocatalytic Activity of BiVO4/BiFeO3 Heterojunctions Through Built-in Polarization Field Tailoring Carrier Transfer Performances

Photogenerated charge separation at BiVO4 photoanodes enhanced by a Ag-modified porphyrin polymer skeleton

Enhanced Photovoltaic Effect in BiVO4 Semiconductor by Incorporation with an Ultrathin BiFeO3 Ferroelectric Layer.

High-performance BiVO4 photoanodes cocatalyzed with an ultrathin α-Fe2O3 layer for photoelectrochemical application

Fabrication of Fe2O3/BiVO4 heterojunction by doping method to improve the solar water splitting performance of BiVO4

Boosting the Photoactivity of BiVO4 Photoanodes by a ZnCoFe-LDH Thin Layer for Water Oxidation

Boosting the Photoelectrochemical Performance of BiVO 4 Photoanodes by Modulating Bulk and Interfacial Charge Transfer

Enhancing the Photoelectrochemical Water Oxidation Reaction of BiVO 4 Photoanode by Employing Carbon Spheres as Electron Reservoirs

Bismuth vanadate photoanode synthesized by electron-beam evaporation of a single precursor source for enhanced solar water-splitting

Ni doped amorphous FeOOH layer as ultrafast hole transfer channel for enhanced PEC performance of BiVO4

Boosting the Performance of BiVO4 Photoanodes by the Simultaneous Introduction of Oxygen Vacancies and Cocatalyst Via Photoelectrodeposition.

Reinforcement of a BiVO4 Anode with an Fe2O3 Underlayer for Photoelectrochemical Water Splitting

Structural Engineering of BiVO4/CoFe MOF Heterostructures Boosting Charge Transfer for Efficient Photoelectrochemical Water Splitting

Enriched Surface Oxygen Vacancies of Photoanodes by Photoetching with Enhanced Charge Separation

Interfacial Engineering of BiVO4/Bi2Mo2O9 Heterojunction Toward Photogenerated Carriers Anisotropic Transfer

Boosting the photoelectrochemical performance of bismuth vanadate photoanode through homojunction construction

BiVO4 Ceramic Photoanode with Enhanced Photoelectrochemical Stability